Iwata IS-50 Silver Jet User manual

P.O. Box 14397 * Portland, OR 97293 * Ph.503.253.7308 * Fx.503.253.0721
e-mail: [e-mail] * website: www.iwata-medea.com
Assembly Instructions
Iwata Silver Jet Air Compressor
Model IS-50
Congratulations on the purchase of the Iwata Silver Jet Air
Compressor. This air compressor has been designed for user who
needs quite, clean and pulse free air with precise adjustment of air
pressure to the airbrush. Carefully follow the instructions in this
owners manual before using the unit.
Features:
Oil-less piston compressor
Air Pressure Adjustor
Air Pressure Gauge
Airbrush Holder
Power Switch
Protective Metal Case
Pistol Grip Filter
SETTING UP YOUR COMPRESSOR:
a. Carefully unpack the compressor and all packaged components.
Included in the box are the following
items:
1 ea. IS-50 compressor
1 ea. Airbrush Airhose
1 ea. Pistol Grip Filter
b. Screw the Pistol Grip Filter
onto the airbrush
(finger tighten only)

c. Screw the airhose onto the
Pistol Grip Filter.
(finger tighten only)
d. Screw the airhose onto the
compressor.
e. Press down on the trigger before
turning on the unit.
f. Plug the unit into a grounded wall
outlet.
Turn ON the unit by pressing the
top side of the switch.
Adjust the air pressure by turning
the air adjustment knob to the
desired pressure.
g. As the unit is being used, water may
collect in the Pistol Grip Filter.
Release the water by pushing
up on the release valve with your
finger and a paper towel.