Iwata NINJA JET IS35 DE Instruction Manual

IS35 IWATA NINJA JET
OPERATING INSTRUCTION MANUAL
IMIS35-OAK

3
ANEST IWATA-MEDEA, INC.
Portland, Oregon U.S.A.
[phone] (M-F)
[email protected]
www.iwata-airbrush.com
ANEST IWATA AUSTRALIA PTY LTD.
Mt. Druitt, NSW
[phone]
www.anest-iwata.com.au
ANEST IWATA STRATEGIC CENTER
Cardano al Campo, Italy
[phone]
www.anest-iwataeu.com
ANEST IWATA SOUTH-EAST ASIA CO., LTD.
Bangkok, Thailand
[phone]
www.anest-iwatasoutheastasia.com
ANEST IWATA SHANGHAI
Shanghai, China
[phone] / 15 / 16
www.anest-iwata-sh.com
ANEST IWATA RUS LLC
Moscow, Russia
[phone]
www.anestiwata.ru
ANEST IWATA CORPORATION
Yokohama, Japan
[phone]
www.anest-iwata.co.jp
ANEST IWATA (U.K.) LTD.
Neots Cambs, England
[phone]
www.anest-iwata.co.uk
ANEST IWATA MOTHERSON LTD.
Uttar Pradesh, India
[phone] / 14 / 17
www.anest-iwata.co.jp
ANEST IWATA SOUTH AFRICA (PTY) LTD.
Johannesburg, Republic of South Africa
[phone]/2265/2223
www.anest-iwata.co.za
CENTURY TRADING CO., LTD.
Seoul, Korea
82-2-2163-0300
www.centrading.co.kr
If you have any issues or warranty service questions, contact your
local ANEST IWATA aliate before returning to your place of purchase.
NEED ASSISTANCE

ASSEMBLY INSTRUCTIONS
Unpack the compressor and all components:
- Iwata Ninja Jet Airbrush Compressor (IS35)
- Iwata Cobra Coil Air Hose
- Air Hose Adapters (for use with Badger, Aztec and Paasche airbrushes)
- Iwata Ninja Jet Operating Instruction Manual
4
VOLTAGE CAUTION - READ CAREFULLY
If you bought the compressor in the country you’re going to use it, it’s completely ready- to-go. If you’re going to transfer the
compressor to another country with a dierent voltage, you’ll need a plug adapter and the appropriate power converter.
These items typically are found at hardware stores or electronic stores. Using compressors with the wrong voltage adapters
and converters can damage the compressor or result in an electrical re.
Air Outlet
Handle
Air Bleed Valve Knob
Airbrush Holder
Air Hose
Electrical Cord
1/12 Hp
zero maintenance,
oil-less piston motor

GETTING STARTED
ENDING A SESSION
1. Screw the air hose onto the airbrush.
a. If you’re using a brand of airbrush other than Iwata, use the appropriate adapter.
2. Screw the air hose onto the compressor.
a. Other brands of airbrush hoses will t the compressor. (Compressor has standard 1/4”threads.)
3. Press down on the airbrush trigger before turning on the unit.
4. Plug the unit into a grounded wall outlet. Avoid using an extension cord.
5. Turn ON the unit by pressing the on/o switch. Adjust the air pressure by turning the air bleed valve knob. Turn knob
toward “+” to increase pressure and toward “-” to decrease pressure.
6. When not using your airbrush, place the front of the airbrush into the holder. If using a bottle-feed airbrush, put the
back end of the airbrush into the holder.
NOTE ON MOISTURE: When unit gets warm from extended use, it can spit out moisture. To prevent this, use the Iwata
Pistol-Grip Moisture Filter (F A450) which is sold separately.
1. Turn o the compressor.
2. Release any leftover air by pressing down on your airbrush trigger (being careful of any excess paint) or unscrewing your
airbrush from the air hose.
5

Copyright © 2016 Anest Iwata-Medea, Inc. All rights reserved. Iwata® and the Iwata logo are registered trademarks of Anest Iwata Japan. All other trademarks are the properties of their respective owners.
All Iwata compressors are Warranted against all manufacturing defects of material and manufacture or workmanship for a
period of ONE year from the date of purchase*. Any part or material that is or becomes defective so as not to be usable within
this period will be repaired or replaced. This warranty does not cover damage caused by negligence or a compressor that has
been altered or abused in any way.
Call or email Anest Iwata-Medea before returning a compressor for the appropriate procedure for warranty repairs. Any material
that is shipped to Anest Iwata-Medea without prior authorization will not be accepted.
• Anest Iwata-Medea oers technical support over the phone at no charge. Call Customer Care at 503-253-7308
Monday – Friday, 8am – 4:30pm Pacic Time. Telephone support includes general usage information, cleaning tips,
and troubleshooting.
• NOTE: All compressors returned for repair must have a Return Authorization Number. Please call 503-253-7308 to
obtain an RA number, instructions and shipping address.
Warranty service will be provided only at authorized Anest Iwata-Medea service centers. You must pay all charges for shipping/
transporting your Iwata compressor to/from these service facilities.
Anest Iwata-Medea, Inc. will not be responsible for damage to persons or property, commercial loss or any other incidental or
consequential damage caused by a defective compressor. However, some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations may not apply to you.
All implied warranties, including any warranty of merchantability or tness are limited to the duration of this written warranty.
However, some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
* Please keep the sales receipt.
Genuine Iwata
6
WARRANTY

www.IWATA-AIRBRUSH.com