J.Burrows JBSADLSSBK User manual

ASSEMBLY INSTRUCTIONS
SADDLE GAS LIFT STOOL
JBSADLSSBK
Weight capacity: 120kgs
1CTN
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
For spare parts or hardware call [phone] or email [email protected]
1/7

15
2/7
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
• Please check you have all hardware before assembly.
• If you are missing any hardware, please contact Kyvas on [phone] or email
[email protected]
• Please ensure you have the name of the item, required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
.
NOTE
• Do not tighten screws before all screws are in the right place.
• Do not use this product unless all bolts, screws and knobs are firmly secured.
• Check that all bolts, screws and knobs are securely tightened at least every 4 months.
CAUTION
• If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
• Failure to follow these warnings could result in serious injury
WARNING
• CHILDREN MUST BE SUPERVISED.
DANGER
[phone]
Assembly Video
•To view an assembly video,go to https://www.officeworks.com.au
•Search the product by item code or name:
•Click on the icon to watch the video.

5x 1x
1x 1x
1x
A B C
D E
F G
4X 1X
3/7

Step 1
Step 2
Note: Turn the Star Base (B) upside down. Push the Castors (A) firmly into hole at the end of each
leg. Turn the Star Base (B) upright and insert Gas Lift (C) into the center hole of Star Base (B).
Note: Align the Seat Plate (D) so the FRONT of Seat Plate matches the FRONT label on the
bottom of the Seat Cushion (B). Tighten the screws.
C
F
G
D
E
B
A
4/7
FRONT

Note: Place assembled seat on the Gas Lift (C). Push down firmly until connection is secure.
Step 3
Step 4
Your Saddle Gas Lift Stool is now complete and ready for use.
E
C
IMPORTANT NOTE: Periodically check and re-tighten screws
5/7

Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
6/7
Care Instructions
• Spot clean fabric with upholstery shampoo or dry cleaning powder only.
• Do not saturate fabric. Apply proprietary cleaning products strictly according to instructions.
Wipe dry immediately with an absorbent dry cloth.
• Do not use detergents, solvents or abrasive cleaners.
• Keep away and protect from direct sunlight and heat.
• Vacuum regularly.
• Clean, check and tighten all parts regularly.
• Treat spills immediately with an absorbent cloth by blotting the spill.

SADDLE GAS LIFT STOOL
* Stool Height Adjustment
While seated, lift your body
weight from the seat. Reach
under seat and pull lever
to allow the stool to rise to
the desired height. Release
button at desired height.
To lower seat height, push
button while seated and
release at desired height.
*
*
360˚ SWIVEL
360˚ Seat swivel.
Seat Tilt
Sitting in the stool pull lever up.
Move your body to a comfortable position.
Lock the position by pushing the lever down.
Functionality
7/7