Wampat W06L3051N User manual

W06L3051N
Assembly Instructions
Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.

1-1

1
1
2
3
4
5
66
7
9
10
8

２
Tools Required
(Not included)
This illustration shows how the CAM
fastening system works.
Esta ilustración muestra como funciona el
sistema de fijación de leva.
Cette illustration montre comment le
système de fixation de
la CAME fonctionne.
ABC
DEF
GHI
JKL
M
x 20 x 20 x 16
x 4 x 4 x 1
x 2 x 2 x 4
x 1 x 4 x 1
x 1

３
1
· Screw cam bolts (A) into panels (2,3,4,5).
A
4
2
5
3
A
x 16

4
2
· Insert dowels (C) into panels (2,3,4,5,6).
· Insert and secure cam locks (B) to panels (6) to lock it.
C
Bx 8x 8
5
4
66
2
3
C
B
1 2 3

5
3
FG
F1
F2
x 1 x 2
· Screw parts (F1) into panel (7) using screws (G) ,then cover (F1) with (F2).
Step 1 Step 2 Step 3 Final Assembly
Please note the installation direction of (F1),
do not install it in reverse.
7
F1
G
F
F2
F1

6
4
· Insert dowels (C) into panel (6).
· Insert and secure cam locks (B) to panels (7,10) to lock it.
CB
1 2 3
x 4 x 4
10
7
6
5
4
B
C

7
5
· Carefully slide panel (9) into place along the back of the assembly.
10
7
9
9
710

8
6
· Insert dowels (C) into panels (6,7,10).
· Insert and secure cam locks (B) to panels (7,10) to lock it.
CB
x 4 x 4
1 2 3
3
6
2
710
B
C

9
7
· Stick the skid pad (I) on the bottom of the parts (2,3,4,5).
Ix 4
I
2
3
5
4

10
8
· Screw cam bolts (A) into panel (1).
A
1
A
x 4

11
9
· Insert and secure cam locks (B) to panels (2,3,4,5) to lock it.
1
5
4
3
2
B
B
1 2 3
x 4

12
10
1 2
· Secure parts (D) with Screws (E) as per diagram.
· Stick stickers (K) on cam locks (B).
K
E
D
K
E
D
x 4x 4x 4
7
24
10
9

13
11
· Secure parts (J) with Screws (L) as per diagram.
· Insert two parts (H) into part (8) , then press two
parts (H) and move part (8) into part (7) and (10) .
· Release the hand pressing parts (H) , move part
(8) to make parts (H) aligned with the holes on part (7) and (10) .
L
J
H
L
J
8
H
8
7
10
x 1x 1x 2

14
12
Please clean the surface before installation.
Step 1: Keep the switch in the "off"
Step 2: Insert USB cable into Wall Charger
Step 3: Tear tape behind the light strip and stick anywhere you want
Note:
1.Light strip is non-waterproof.
2.There are cutting marks on the light strip. Please follow the
marks to cut the strip and get the perfect length you want. After
cutting, the remaining part that is not connected to the power supply
will be unusable
OFFON
Final Assembly
M
M
x 1

15
13
Final Assembly
Push Here
Tip: If you find that the door does not connect smoothly,
you can adjust part (F) to achieve a perfect connection.
Rotate here
F