J.Burrows STILFORD METAL STATIONERY CABINET JBSTMETCAB User manual

1/8
ASSEMBLY INSTRUCTIONS
STILFORD METAL STATIONERY CABINET
JBSTMETCAB
1CTN

2/8
Tools required for assembly
Recommend 2 adults to assemble
Assemble item on a clean flat surface
NOTE
Please check you have all hardware before assembling.
If you are missing any hardware, please contact the store of purchase.
Please ensure you have the name of the item, required hardware part and
quantity.
Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
Do not tighten screws before all screws are in the right place.
Do not use this product unless all bolts, screws and knobs are firmly
secured.
Check that all bolts, screws and knobs are securely tightened at least every
3 months.
WARNING
If parts are missing, broken, damaged or worn stop using the product until all
repairs are made using manufacturer authorised parts.
Failure to follow these warnings could result in serious injury.
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA

3/8
PARTS LIST
1 2 3 4
x1 x1 x1 x1
5 6 7
x1 x1 x3
HARDWARE LIST
A B C D
、
E
X1
X1
X10
X12 x1
F
X1

4/8
ASSEMBLY INSTRUCTION
Step 1
Step 2

5/8
Step 3
Step 4

6/8
Step 5
Step 6
wall

7/8
Step 7
Step 8
DANGER – To prevent furniture from toppling
attach, mount, bolt or otherwise secure to
walls and floors. Do not put heavy items on
top shelves of the product. Do not place
unstable furniture near where children play.

8/8
MAXIMUM WEIGHT CAPACITY
NOTE: Shelf 40kg
CAUTION: This product is intended to hold the maximum weight indicated.
Exceeding the maximum weight will result in instability and may cause possible injury.
Thank you for purchasing our product!
Please retain your receipt to validate warranty. If you’d like to know more about Officeworks’
furniture products, please visit our website. www.officeworks.com.au