J.Burrows WASHINGTON HIGH BACK CHAIR User manual

1/9
ASSEMBLY INSTRUCTIONS
WASHINGTON HIGH BACK CHAIR
JBWASHCHBK
Weight capacity: 130kgs
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
For spare parts or hardware call [phone] or email [email protected]
1CTN

30
2/9
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
• Please check you have all hardware before assembly.
• If you are missing any hardware, please contact Kyvas on [phone] or email
[email protected]
• Please ensure you have the name of the item, required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
.
NOTE
• Do not tighten screws before all screws are in the right place.
• Do not use this product unless all bolts, screws and knobs are firmly secured.
• Check that all bolts, screws and knobs are securely tightened at least every 4 months.
CAUTION
• If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
• Failure to follow these warnings could result in serious injury
WARNING
• CHILDREN MUST BE SUPERVISED.
DANGER
[phone]
Assembly Video
•To view an assembly video,go to https://www.officeworks.com.au
•Search the product by item code or name:
•Click on the icon to watch the video.

(1/4" x 7/8") (1/4" x 1-1/8")
3/9
x1 x1 x1
x5x1x1
x1x1x6x4
x1
x2

C-L
B
C-R
J
K
H
G
E
F
6
K
Key
4/9
Note: Turn the Star Base (G) upside down. Push the Castors (H) firmly into hole at the end of each
leg. Turn the Star Base (G) upside and insert Gas Lift (E) into the center hole of Star Base (G).
Place cover (F) over the Gas Lift (E).
FRONT
Do not tighten Screws fully until you have completed assembly.

B
K
C-R C-L
B
D
I
I
Tighten 4 x screws(I) with Allen Key (K).
K
5/9
FRONT

Your Washington High Back Chair is now complete and ready for use.
6/9
Note: Align Back Cushion (A) with Seat Cushion (B) by GENTLY inserting back support plate into the
rear hole of the Seat Plate (D) as shown and TIGHTEN by using the knob on the rear right side
of the Seat Plate (D). Check to make sure the knob is loose before this step.
Insert Plastic Stopper (L) into the back support plate as shown.
Before using your Chair, ensure that all the Bolts are tightened fully for safety.
A
B
D
L
WARNING: Please fully tighten the bolt after
you have completed assemby
IMPORTANT NOTE: Periodically check and re-tighten screws

Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
7/9
• Wipe with a damp cloth and mild soap. Wipe dry immediately with an absorbent dry cloth.
• Treat spills immediately with an absorbent cloth by blotting the spill.
• Do not use detergents, solvents or abrasive cleaners.
Care Instructions
• Keep away and protect from direct sunlight and heat.
• Avoid contact with skin, in particular during high temperatures and humidity.
• Clean, check and tighten all parts regularly.
• Vacuum regularly.

Adjustable Tilt Tension Control
-Turn continuously to adjust how
quickly chair tilts back & forth.
Note: if adjusting While sitting in chair:
Turn knob left to tighten tension
Turn knob right to loosen tension
Chair Tilt
Push button whilst moving the arm
up or down. Release button at
desired height.
Functionality
WASHINGTON HIGH BACK CHAIR
8/9

9/9
Warranty 8 years
Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as
intended for 8 years from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:
to cosmetic damage;
to damage caused by consumables used in connection with the product (such as
cleaning products);
where the product has not been used in accordance with all provided instructions;
to damage arising from fair wear and tear;
where the product has not been subject to reasonable use;
where the product has been intentionally or negligently damaged; and/or
if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or
proof of purchase to your nearest Officeworks store or contact 1300 633 423.
This warranty is provided in addition to any rights you may be entitled to under the
Competitions & Consumer Act 2010.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
●
●
●
●
●
●
●