J.Burrows JBSTIRFGY User manual

ASSEMBLY INSTRUCTIONS
STIRLING CHAIR
JBSTIRFGY/JBSTIRPBK
Weight capacity: 150kgs
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
For spare parts or hardware call [phone] or email [email protected]
1CTN
1/11

2/11
[phone]
20
• Please check you have all hardware before assembly.
• If you are missing any hardware, please contact Kyvas on [phone] or email
[email protected]
• Please ensure you have the name of the item, required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
.
NOTE
• Do not tighten screws before all screws are in the right place.
• Do not use this product unless all bolts, screws and knobs are firmly secured.
• Check that all bolts, screws and knobs are securely tightened at least every 4 months.
CAUTION
• If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
• Failure to follow these warnings could result in serious injury
WARNING
• CHILDREN MUST BE SUPERVISED.
DANGER
Assembly Video
• To view an assembly video, go to https://www.officeworks.com.au
• Search the product by item code or name:
• Click on the icon to watch the video.

x1 x1 x2 x1
x1 x1 x5
3/11
4
H(M6*20mm) I(M8*25mm) J (5mm)K

G
Note: Push castors firmly.
F
4/11

K
H
K
H
H
5/11
FRONT
H
4PCS
M6x20mm Bolt
Used to complete this step.
FRONT
H

G
F
K
6/11
I
I
4PCS
M8x25mm Bolt
Used to complete this step.
Note: Push down firmly until
connection is secure.

7/11
I
K
A
A
I
K
I
2 PCS
M8x25mm Bolt
Used to complete this step.
I
I
2 PCS
M8x25mm Bolt
Used to complete this step.
Step 7

Step 8
Step 9
Your Stirling Chair is now complete and ready for use.
IMPORTANT NOTE: Periodically check and re-tighten screws.
8/11
C-L
C-R
B
J
A

Thank you for your purchase. Please retain your receipt to validate warranty.
ease visit www.officeworks.com.au
Care Instructions
• Vacuum regularly.
• To maintain the appearance of non-upholstered parts, wipe the surface with a clean cloth
dampened with a mild soap solution.
• Spot clean with upholstery shampoo or dry powdered cleaner only. Test on a concealed
area before proceeding. Apply proprietary cleaning products strictly according to
instructions.
• Do not saturate fabric or interior with water or other cleaning products.
• Treat spills immediately with an absorbent cloth by blotting the spill.
• Persistent stains may require treatment by a professional cleaner.
• Do not use detergents, solvents or abrasive cleaners.
• Keep away and protect from direct sunlight and heat.
• Avoid contact with skin, in particular during high temperatures and humidity.
• Piling may occur as a result of daily wear. This is not a manufacturing fault and can be
removed by using a Fabric Pill Remover. De-pilling removes unsightly loose surface fibres
and does not affect fabric performance.
• Clean, check and tighten parts regularly.
Care Instructions
Care Instructions for PU leather upholstery
Care Instructions for fabric upholstery
• Vacuum regularly.
• Wipe with a clean damp cloth and mild soap. Wipe dry immediately with an absorbent
dry cloth.
• Treat spills immediately with an absorbent cloth by blotting the spill.
• Do not use detergents, solvents or abrasive cleaners.
• Keep away and protect from direct sunlight and heat.
• Avoid contact with skin, in particular during high temperatures and humidity.
• Clean, check and tighten parts regularly.
9/11

STIRLING CHAIR
Functionality
FLIP BACK
ARMREST
10/11
*Flip Up Armrest
- Use your hand to raise
and lower the armrest.
Chair Height Adjustment
*
- To increase chair height pull


- Release lever at desired height.
-To lower chair height sit fully into
the chair and pull lever upward.
- Release lever at desired height.


Chair Tilt
*
-
lever out to unlock & allow

 
lever to lock. Chair will have slight

*
- Turn con nuously to adjust how
quickly chair lts ack & forth.
Note: If adjus ng while si ng in chair
Turn knol to ghten tension.
Turn knoright to loosen tension.
Adjustable Tilt Tension Control

11/11
Warranty 3 years
Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as
intended for 3 years from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:
to cosmetic damage;
to damage caused by consumables used in connection with the product (such as
cleaning products);
where the product has not been used in accordance with all provided instructions;
to damage arising from fair wear and tear;
where the product has not been subject to reasonable use;
where the product has been intentionally or negligently damaged; and/or
if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or
proof of purchase to your nearest Officeworks store or contact 1300 633 423.
This warranty is provided in addition to any rights you may be entitled to under the
Competitions & Consumer Act 2010.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au