Mocka Neva Change Table User manual

Neva Change Table
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
bolt
x24
B
locking nuts
x24
C
dowel
x36
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
D E
Wall Strap
1x
screw
1x
wall screw
F
2x
washer
G
1x
wall anchor
H
1x
wall strap

1 x2 2
Neva Change Table
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 18 x dowels (C) to panel [5]. Attach 12 x bolts (A) to panel [5].
Tighten with a screwdriver.
Attach panels [5], [2] and [3] and [4] together as shown and secure
with 24 x locking nuts (B). Tighten with a screwdriver.
5
5
2
5
A
C
A
AC
C
B
B
BB
B
3
3
3
4

3
3
Assembly Instructions
Neva Change Table
4
D
E
F
G
H
F
Once assembled lift furniture into place, do not drag.
Attach wall strap (H) to panel [4] with 1x washer (F) and 1x screw (D).
Use a drill to create a small hole lining up with the safety strap (H).
Fasten to wall using 1x wall anchor (G), 1x washer (F) and 1x wall
screw (E).
Ensure unit is balanced and steady before use. You’re done, enjoy!
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558