Item no. 10200031-01, Revision 00 3 ( 32 )
Contents:
Translation of the original manual
1 Preliminary information 4
1.1 Purpose of the manual.......................................................4
1.2 Explanation of symbols used........................................... 4
2 Transport and packaging 5
2.1 Scope of supply of HF spindle.........................................5
2.1.1 Optional accessories..............................................5
2.1.2 Documentation supplied.....................................5
2.2 Packaging of HF spindle.................................................... 6
3 Designated use 6
3.1 Permissible types of machining...................................... 6
3.2 Permissible materials..........................................................6
4 Safety instructions 7
4.1 Safe working.......................................................................... 8
4.2 Shutdown of HF spindle.................................................... 9
4.3 Installation and maintenance.......................................... 9
4.4 Modification and repair ..................................................... 9
4.5 Improper operation ............................................................9
5 Technical description 10
5.1 Connections of HF spindle .............................................10
5.2 Electrical connection ........................................................10
5.3 Cooling ..................................................................................11
5.3.1 Cooling via spindle holder ............................... 11
6 Technical Specifications 12
6.1 Dimensions ..........................................................................13
6.2 Technical data sheet (KL 1001, AC motor) ................14
6.2.1 Performance Diagram........................................ 15
6.3 Wiring diagram...................................................................16
6.4 Air-borne noise emissions ..............................................17
7 Operating location 18
8 Installation 19
8.1 Installing the HF spindle..................................................19
9 Commissioning 20
9.1 Running-in schedule.........................................................20
9.2 Daily start-up .......................................................................21
9.3 Shutdown signal ................................................................21
9.4 Commissioning after storage ........................................21
10 Tool change 22
10.1 manual tool change..........................................................22
11 Tools for high speed cutting 23
12 Maintenance 24
12.1 Ball bearings .........................................................................24
12.2 Daily cleaning.......................................................................24
12.2.1 Before commencing work .................................24
12.2.2 With every tool change ......................................25
12.3 In the case of storage.........................................................25
12.4 Monthly maintenance.......................................................25
12.5 Long periods of storage ...................................................25
12.6 Maximum storage time.....................................................25
13 Dismantling 26
13.1 Disposal and environmental protection ....................26
14 Service and repairs 27
14.1 Service partners...................................................................27
14.2 Malfunctions.........................................................................28
15 Warranty 30
16 Declaration of Incorporation 31
