Senco DuraSpin ExTPro User manual

KYOCERA SENCO Netherlands BV
Pascallaan 88
8218 NJ Lelystad
The Netherlands
EMEA: www.senco.eu
© 2018 KYOCERA SENCO Industrial Tools, Inc.
DuraSpin ExTPro
NFE2WB • May 30, 2017
ExTPro
Installation Instructions
(Original Instructions)

2
Installation guide
To Install a DuraSpin collated screw fastening system, adjust the mounting bracket to the correct position for your tool
type, corded or cordless. Place the rear of the DuraSpin housing into the circular mounting bracket.
INSTALLATION GUIDE
B ( 1 : 1 )
B
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
Verpa Senco B.V., Pascallaan 88, 8218 NJ Lelystad, phone:+ 31 (0)320 29 55 75, www.verpa-senco.com, [e-mail]
Drawn by: DOL 21-3-2017 Revision:
-
Format:
A3
Short Description:
Duraspin attachment - Exploded View
Creation date:
Scale: Units:
Material:
1 : 10 mm
Doc no.: P15339 Duraspin attachment - Exploded View_3.dwg
Part number:
P15339
Status: Pending
Dimensions:
Third angle projection:
Mass:
Description:
Tolerances: ISO 2768 - 1/2
POSISTION FOR BATTERY (DC) VERSION
POSITION FOR CORDED (AC) VERSION
Position the front of the DuraSpin tool centrally into the front mounting bracket. Align items 4 with the recess in the
DuraSpin tool housing and tighten cap head screws.
A ( 1 : 1 )
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
Verpa Senco B.V., Pascallaan 88, 8218 NJ Lelystad, phone:+ 31 (0)320 29 55 75, www.verpa-senco.com, [e-mail]
Drawn by: DOL 21-3-2017 Revision:
-
Format:
A3
Short Description:
Duraspin attachment - Exploded View
Creation date:
Scale: Units:
Material:
1 : 1 mm
Doc no.: P15339 Duraspin attachment - Exploded View_3.dwg
Part number:
P15339
Status: Pending
Dimensions:
Third angle projection:
Mass:
Description:
Tolerances: ISO 2768 - 1/2

3
PARTS DIAGRAM
S235JRClampblock
P15339_1_324
Hangrip ExtensionP15339_513
Extension pole + handleP15339_212
Mounting bracket DuraspinP15339_111
LengthMaterialDescriptionPart number
Qty
Item
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
Verpa Senco B.V., Pascallaan 88, 8218 NJ Lelystad, phone:+ 31 (0)320 29 55 75, www.verpa-senco.com, [e-mail]
Drawn by: DOL 21-3-2017 Revision:
2
Format:
A3
Short Description:
Duraspin attachment - Exploded View
Creation date:
Scale: Units:
Material:
1 : 4 mm
Doc no.: P15339 Duraspin attachment - Exploded View.dwg
Part number:
P15339
Status: Pending
Dimensions:
Third angle projection:
Mass:
Description:
Tolerances: ISO 2768 - 1/2
REV REVISION DATE REVISION REASON
-
211-4-2017 Promoted mounting block+bolts to become an additional item (#4)
<<<CONFIDENTIAL>>>
THIS DRAWING CONTAINS PROPRIETARY INFORMATION AND IS SUBMITTED SUBJECT
TO RETURN UPON REQUEST AND UPON THE EXPRESS CONDITION THAT THE
INFORMATION CONTAIN HEREIN WILL NOT BE USED DIRECTLY IN ANY WAY
DETRIMENTAL TO THE INTEREST OF VERPA-SENCO.
1
3
2
4
NUMBER PARTNUMBER DESCRIPTION
1 WB0062EU Mounting bracket
2 WB0063EU Extention pole + handle
3 WB0064EU Handgrip extention
4 WB0065EU Mounting blocks