J-Tech Digital JTD-2865 User manual

JTD-2865 | JTECH-WDEX-10M
USB-C Wireless Extender
Transmitter

How to Mirror
1 Install the Receiver
Connect theJTECH-WDEX-10Mreceiver to the HDMI input port on the
TV orDisplayand power on via USB 5V/1Aadapter.
2 Plug and Play
Connect the JTECH-WDEX-10M transmitter to USB-C port of
source computer or mobile device. The transmitter’s LED will blink
while in pairing mode. When the LED is solid, the transmitter will
start mirroring automatically.
12
3 Stop and Restart Mirroring
Press the button on Transmitter to stop mirroring or restart mirroring.
Note: JTECH-WDEX-10M transmitter supports mirroring for all
laptops including Windows OS, MacOS, and Android mobile
devices with DP Alt output. To reset the transmitter to factory
default settings, press the button for 20 seconds.

Ready to pair
How to Pair Transmitter with Receiver
1 Enable Pairing Mode for the Receiver
(1) Power up the receiver via external USB power adapter(5V/1A).
(2) Plug the receiver in to the HDMI port on the display
(3) Using a pin, press the reset button in the reset hole on the
receiver for 2 seconds. Release when the screen shows “Release
the button to pair”.
Release the button to pair
2 Press the Transmitter Button
Connect transmitter to laptop or mobile device to provide power.
Press and hold the transmitter button for 5 seconds to complete
pairing while the screen shows “Ready to pair”. After paired, casting
will begin automatically.
Note: There are 3 functions for the receiver button -
(1) Quick Press: Switch the receiver to 2.4G/ 5G Hz Wi-Fi mode.
(2) Press for 2 seconds: Enable pairing mode forTransmitter.
(3) Press for 10 seconds: Reset the receiver to default settings.
5V/1A
2 secs
HDMI
2
3
1
5 secs