J-Tech Digital JTD-2994 User manual

1080P 60Hz One - Many HDMI Ethernet Extender Up to 328Ft
JTD-2994 | JTECH-EX100M
USER MANUAL
J-TECH DIGITAL INC.
9807 EMILY LANE
STAFFORD, TX 77477
TEL: [phone]
E-MAIL: [email protected]
V1.0

2
Scan the QR code below or visit
https://resource.jtechdigital.com/products/2994
to view and access detailed digital
resources regarding this unit.

Safety Instructions:
Before using this product, please carefully read the following safety instructions to
ensure its proper use and keep this manual for future reference:
To prevent electric shock, do not attempt to open the product.
Only qualified personnel should perform any repairs or maintenance.
Always place the product on a stable, flat surface to prevent it from falling.
Do not expose the product to water, moisture, or high-humidity environments to avoid
the risk of damage.
To prevent damage from direct sunlight or high temperatures, do not expose the product
to such environments.
Do no place the product near heat sources like radiators, heat registers, stove, or other
heat-producing apparatus.
Do not place any objects on top of the product to avoid damage.
Use only the attachments and accessories specified by the manufacturer.
During lightning storms or prolonged periods of disuse, unplug the power supply to
prevent damage.
3

4
Features1.
Specifications2.
Package Contents3.
Panel Description4.
Connecting and Operating5.
Typical Application6.
Maintenance 7.
Warranty 8.
Mail-In Services 9.
Limited Warranty Limits and Exclusions 10.
Table of Contents
5
5
6
6
7
8
9
9
9
9

1. Features
Extends HDMI signal up to 328ft (100m) over single CAT5E/CAT6.
The highest video resolution is 1080P 60Hz (YUV444).
HDMI1.4, HDCP1.4.
Supports infrared extension transmission control.
H.265 encoding, low bandwidth and high image quality.
Low power consumption, less than 2w
2. Specifications
5

6
3. Package Contents
(1) x Transmitter
(1) x Receiver
(2) x DC 12V/1A Power Adapters
(1) x IR TX Cable
(1) x IR RX Cable
(1) x User Manual
4. Panel Description

7
5. Connecting and Operating
Connect the HDMI signal source (Such as DVD, STB etc.) to HDMI Transmitter.
Connect CAT5e or 6 cables to both the Ethernet of the transmitter and Ethernet port of the
Receiver. (The cables must follow the standard of EIA-TIA 568B).
Connect the HDMI display (Such as HD-LCD, HD-DLP) into the Receiver.
Connect the power supply into Power port.
Connect the IR TX receiving cables into IR TX port on the back panel and affix the emitter onto
the source IR windows.
Connect IR-RX cable into IR-RX port on the receiver and affix the IR receiver in direct line of site
with the handheld remote control. It is recommended to affix the receiver on the display frame
/bezel or the display stand.

8
6. Typical Application
One - One
One - More

7. Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.
8. Warranty
If your product does not work properly because of a defect in materials of workmanship, our company
(referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts and Labor (1)
Year”, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a)
repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product.
The decision to repair or replace will be made by the warrantor.
During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts” warranty
period, there will be no charge for parts. You must mail-in your product during the warranty period. This
Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A
purchase receipt or other proof of original purchase date is required for Limited Warranty service.
9. Mail-In Service
When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the
original carton. Include a letter detailing the complaint and provide a day time phone and/or email address
where you can be reached.
10. Limited Warranty Limits and Exclusions
This Limited Warranty ONLY COVERS failures due to defects in material or workmanship, and DOES NOT
COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by warrantor,
or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration,
faulty installation, set-up adjustments, mis- adjustment of consumer controls, improper maintenance, power
line surge, lightning damage, modification, or service by anyone other than a Factory Service center or
other Authorized Servicer, or damage that is attributed to acts of God.
There are no express warranties except as listed under “Limited Warranty Coverage”. The warrantor is not
liable for incidental or consequential damages resulting from the use of this product or arising out of any
breach of this warranty. (As examples, this excludes damages for lost time, cost of having someone
remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media
or images, data or other recorded content. The items listed are not exclusive but are for illustration only).
Parts and service, which are not covered by this limited warranty, are your responsibility.
9

WWW.JTECHDIGITAL.COM
PUBLISHED BY J-TECH DIGITAL INC.
9807 EMILY LANE
STAFFORD, TX 77477
TEL: [phone]
E-MAIL: [e-mail]