Jøtul GF 400 BF CE2 User manual

1
139810_R4 GF 400 BF CE27/18
Jøtul GF 400 BF CE2
Balanced Flue Gas Stove
Installation and
Operation Instructions
WARNING: If the information in
these instructions is not followed
exactly, a fire or explosion may
result causing property damage,
personal injury or death.
– Do not store or use gasoline or
other flammable vapors and liq-
uids in the vicinity of this or any
other appliance.
– WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical
switch; do not use any phone in
your building.
• Immediately call your gas
supplier from a neighbour’s phone.
Follow the gas supplier’s
instruction.
• If you cannot reach your gas
supplier, call the fire department.
– Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.

2
139810_R4 GF 400 BF CE27/18
EU Gas Appliance Regulation (GAR)
We
Company name:
Jøtul North America, Inc.
Postal address:
55 Hutcherson Drive
Postcode and City
Gorham, Maine
Country
United States of America
Telephone number:
+0 1 207 591 6601
e-mail address
Declare that the GAC is issued under our sole responsibility and belongs to the following product:
Apparatus model/Product:
Jøtul GF 400 BF CE2
Type:
Article Number:
Balanced Flue Gas Heater
30051208
Batch:
Serial Number:
Series :
Object of the declaration (identification of apparatus allowing traceability; it may include a colour
image of sufficient clarity where necessary for identification of apparatus):
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
Gas Appliance Regulation (GAR) 2016/142/EC (ex-90/396/EEC)
Title, Date of Standard/Specification
BS EN 613: 2001 + A1: 2003 + C1: 2008
Notified body (where applicable)
4 digit notified body number
Kiwa Ltd T/A Kiwa Gastec
0558
CE/0558/016/163
Additional information:
N/A
Signed for and on behalf of: Jøtul North America, Inc.
Gorham, Maine U.S.A.
18/07/2018
Roger Purinton
Product Development Manager
Place of issue
Date of issue
Name, function

3
139810_R4 GF 400 BF CE27/18
Table of Contents
1. Technical Information .......................... 4
2. General Information .............................5
3. Safety Information.................................5
4. Installer Information ............................ 6
5. User Information ..................................10
6. Parts Illustrations and Lists .............. 12
7. Remote Control Operation .............. 18
8. Warranty ............................................... 22
9. Service Record...................................... 23
THIS OWNER’S MANUAL PROVIDES
INFORMATION TO ENSURE SAFE
INSTALLATION AND EFFICIENT,
DEPENDABLE OPERATION OF YOUR STOVE.
PLEASE READ THESE INSTRUCTIONS
IN THEIR ENTIRETY AND MAKE THEM
AVAILABLE TO ANYONE USING OR
SERVICING THIS GAS STOVE.

4
139810_R4 GF 400 BF CE27/18
1.Technical Information
THIS APPLIANCE IS FACTORY-EQUIPPED
TO USE ONLY NG (G20/25).
THIS APPLIANCE IS NOT FUEL
CONVERTIBLE.
SEE THE ATTACHED DATA PLATE
AND SHIPPING LABELS FOR FUEL
IDENTIFICATION AND SPECIFICATIONS.
DO NOT SUBSTITUTE ANY TYPE OF GAS
OTHER THAN THAT SPECIFIED FOR THE
MODEL DESIGNATED ON THE DATA PLATE.

Technical Data - Jøtul GF 400 BF CE2 PIN 0558CN1873
Countries of Destination
AT, BG, CH, CZ
DK, EE, ES, FI
GB, GR, HR, IE
IT, LT, LV, NO, PT
RO, SE, SI, TR
DE,
LU,
PL,
RO
BE, FR NL
Gas Type
NATURAL GAS
G20 G20DG25 G20DG25.3 G25
Gas Category I2H I2E I2E+ I2EK I2L
Supply Pressure (mbar) 20 20D25 20D25 25
Nominal Heat Input (Net, kW) 7.0 7.0D6.4 7.0D7.6 6.4
Burner Pressure at Full Rate - Hot
(mbar) ±1 (0mbar) 5.9 5.9D7.4 5.9D7.4 7.4
Maximum Gas Consumption (m3/h)
15°C, 1`013 .25 mbar 0.740 0.740D0.787 0.740D0.793 0.787
Main Burner Injector Marking (x1) 33
Efciency
Horizontal termination (%, nett) Verti-
cal termination (%, nett)
81.1
83.6
81.1D79.9
83.6D82.6
81.1D80.4
83.6D82.6
79.9
82.6
Maximum Heat Output
Horizontal termination (kW)
Vertical termination (kW)
5.7
5.9
5.7D5.1
5.9D5.3
5.7D5.3
5.9D5.5
5.1
5.3
Efciency Class 2
NOx Class 5
Flue Type C11 or C31
Concentric Flue Diameter
(inner/outer) 100/150mm

5
139810_R4 GF 400 BF CE27/18
2. General Information
This product has been approved to the European
Standard EN 613:2000 and is in accordance with EC Gas
Appliances Directive 2009/142/EC (ex-90/396/EEC).
Before installation, ensure that the local distribution
conditions (identification of the type of gas and
pressure) and the adjustment of the appliance are
compatible.
This product may only be used with Natural Gas
G20 indicated on the Data Plate and Shipping Labels.
It is not fuel convertible.
Assembly, installation and maintenance must be
performed by a qualified person in accordance with
the instructions for Assembly, Installation, and Use
enclosed with the product. The installation may only
be operated after it has been inspected by a qualified
person and a certificate of completion has been
issued.
The Installation should be carried out in accordance
with the Building Regulations which include the
following standards for installation and maintenance
of flues, ventilation and installation of Gas Fires.
For UK - BS 5440:1, BS 5440:2, BS 5871 Part 1
For Republic of Ireland - IS813, ICP3, IS327.
For France - Decree of 2 August 1977 and the NF DTU
61.1 P4.
The appliance is designed as a freestanding unit and
no additional fixing methods need apply.
This appliance is intended for use on a gas installation
with a governed meter.
3. Safety Precautions
This appliance must be installed in accordance with the
rules in force. Consult instructions before installation
and use of this appliance.
The appliance is designed as a heating device and all
components will become hot (excluding control valve
and control access panel). Care should be taken not to
touch unit when it is in operation.
WARNING! If you detect an odour of gas:
• Do not light the stove or any other appliance.
• Do not use electrical switches or the telephone.
• Contact your gas supplier’s emergency number.
The appliance must only be installed and repaired by
qualified personnel. Always turn off the gas supply
before service.
The appliance must be inspected following installation
and at least once a year by qualified personnel.
The appliance must only use gas of the correct type and
pressure. See Technical Data for more details.
It is permitted to install the appliance adjacent to a
wall made of combustible material maintaining the
clearances specified in figs. 3-4.
The minimum clearance to combustible material in
front of the appliance is 600mm.
The minimum clearance to combustible mantel or shelf
above the appliance is 600mm.
WARNING: Curtains may not be placed within 600mm
above the appliance.
Never store combustible gas or liquid in the same room
with the appliance.
WARNING: Never use the appliance if the front glass
panel has been removed, is cracked, or is open.
Replacement of the glass should be done by a licensed
or qualified service person. Only remove glass for
routine service. Always handle glass carefully.
Do not burn solid fuel in the appliance.
WARNING: Do not modify or substitute materials
comprising the artificial solid fuel bed components.
Do not modify the fuel bed layout or quantity of
material therein.
Do not place combustible material on or near the
appliance, as the appliance becomes hot.
This appliance becomes hot in use so it advisable to
keep young children, the aged, or infirm, and animals at
a safe distance using a fireguard conforming to BS6539
or BS6778 to provide extra protection.