j5 create JUA210 User manual

USB DISPLAY ADAPTER
QUICK INSTALLATION GUIDE
GUÍA DE INSTALACIÓN RÁPIDA
KURZANLEITUNG FÜR INSTALLATION
GUIDE D'INSTALLATION RAPIDE
クイックインストールガイド
快速安裝
JUA210 / JUA230 / JUA250

USB DISPLAY ADAPTER
QUICK INSTALLATION GUIDE
JUA210 / JUA230 / JUA250

1
GETTING STARTED
Installation on Windows
1. Insert the Driver CD into the drive; the setup program
should launch automatically.
 • Make sure that the USB Display Adapter is NOT
connected to your host computer.
2. Executing the Setup.exe application will launch the
following screen. Click “Next” to continue.
*Driver download is available at www.j5create.com
in “support > download” area.

2
Installation on MAC (Snow Leopard)
3. When the installation is complete, select “Yes, I want
to restart my computer now” and click “Finish” to
restart.
1. Insert the Driver CD into the CD-ROM drive and run
the .dmg file to draw drivers.
 • Make sure that the USB Display Adapter is NOT
connected to your host computer.
*Driver download is available at www.j5create.com
in “support > download” area.

3
2. Click “Continue” to proceed 3. Type your password then click “OK”.
It will take few minutes to process.
4. Click “Restart” to complete

4
DEVICE HARDWARE INSTALLATION
1. After the computer has rebooted, connect the external display device to the VGA/DVI/HDMI connector of the
USB Display Adapter.
2. Connect the USB Display Adapter into a USB 2.0 port on the host computer.
3. Software processing will take a few minutes. After the software processing is complete you will be ready to use the
USB Display Adapter.
*Multi-USB Display Adapter Installation
If you are going to install more USB Display Adapters, please repeat the hardware installation and then reboot the
computer.

5
DISPLAY FUNCTION INSTRUCTIONS
Display Resolution
Select the resolution you want on the display device.
Display Orientation
Turn the connected display device
* This function is not avaiable on MAC
Display Mode
Extended mode
Mirror mode
Primary mode

6
Display Setting on Windows 7 Display Setting on Windows Vista/XP
Right click on the desktop and go to “Screen Resolution” Right click on the icon ( ) on the lower right-hand side
of the toolbar.

7
Display Setting on MAC (Snow Leopard).
Go to ( ) and then “System Preferences”.
Choose the “Display” or “Arrangement” tab to adjust.
For complete instructions on Functions please refer to the
User Manual.

8
Required Environment
 • MicrosoftWindows7,Vista,XP(32-bitor64-bit)
 • MacOSXv10.6(SnowLeopard)/v10.7(Lion)
 • AvailableUSB2.0port
 • MinimumSystemRequirements
QTY 1~2 Dongles 3~4 Dongles
CPU IntelDualcore1.8GHzorabove IntelQuadcore2.4GHzorabove
RAM 2GBorHigher 4GBorHigher
USB IndependentpowersupplywasrequiredwhenusingtheUSBHUBtoconnectmultipledongles.
 • Thisdeviceisprioritizedfor‘OfficeApplication’notfor‘HomeEntertainment’,onlyonemonitorforfullscreenDVD
  playbackisrecommended.
Package Contents
 • USBDisplayAdapter
 • DriverCDwithE-Manual
 • QuickInstallationGuide
Regulatory Compliance
 • FCC/CE/C-Tick/VCCI
Disclaimer
Informationinthisdocumentissubjecttochangewithoutnotice.Themanufacturerdoesnotmakeanyrepresentationsorwarranties(impliedorotherwise)regarding
theaccuracyandcompletenessofthisdocumentandshallinnoeventbeliableforanylossofprofitoranycommercialdamage,includingbutnotlimitedtospecial,
incidental,consequential,orotherdamage.Nopartofthisdocumentmaybereproducedortransmittedinanyformbyanymeans,electronicormechanical,including
photocopying,recordingorinformationrecordingandretrievalsystemswithouttheexpressedwrittenpermissionofthemanufacturer.