j5 create JUA370 User manual

JUA370
USB 3.0 MULTI-ADAPTER
VGA & Gigabit Ethernet
JUA370
User Manual

Table of Contents
INTRODUCTIONS ............................................................................................................................. 3
System Requirements ................................................................................................................ 3
Specifications.............................................................................................................................. 4
Package Contents..................................................................................................................... 5
GETTING STARTED............................................................................................................................ 6
INSTALLATION FOR WINDOWS....................................................................................................... 6
Device Driver Installation.......................................................................................................... 6
Verify Device Driver Installation............................................................................................... 9
Uninstalling the Device Driver .................................................................................................. 9
INSTALLATION FOR MAC.............................................................................................................. 10
Device Driver Installation........................................................................................................ 10
Verify Device Driver Installation............................................................................................. 13
Network Setting on MAC......................................................................................................... 13
Uninstalling the Device Driver ................................................................................................ 14
FUNCTIONS INSTRUCTIONS: WINDOWS 7................................................................................... 15
FUNCTIONS: WINDOWS XP .......................................................................................................... 18
FUNCTIONS: MAC......................................................................................................................... 23
TECHNICAL SUPPORT........................................................................................................................ 27
LIMITED WARRANTY......................................................................................................................... 27

USB 3.0 MULTI-ADAPTER USER MANUAL
3
INTRODUCTIONS
The j5create USB 3.0 Multi-Adapter series provides extra connectivity for your computer with 5
Gb/s faster transfer speed. These pocket-sized multi-adapters allow you to add an additional
USB computer peripheral, VGA monitor or gigabit LAN through USB port.
With j5create multi-adapters, there is no need to open up your computer to add an
expensive graphics card, you simply load the drivers, plug in the adapter to the USB port, then
plug in the VGA monitor cable into the adapter and you are ready. It supports three viewing
modes: primary, extended, mirror modes. With “plug & play” functionality between your
computer and 2nd monitor or projector, you will be able to create a new visual environment
in seconds.
The gigabit multi-adapter allows you to add networking capabilities to a computer without
them through a Wi-Fi connection. It has an RJ-45 connector that supports 10/100/1000 Mbps
Ethernet performance – perfect for your Ultrabook or MacBook.
j5create’s elegant multi-adapter series provides you with a fast and portable alternative
solution.
System Requirements
Microsoft Windows 8, 7, XP (32-bit or 63-bit)
Mac OS X 10.8 / 10.7 / 10.6
CPU: Intel 2 core Quad 2.33 GHz
RAM: 2 GB DDR2
Available USB port (USB 3.0 is recommended)
Note for Video Player:
*Windows XP users: “Windows Media Player” is recommended for video playback
*Windows XP users & MAC users: Some Windows XP & MAC products are not supported
by USB 3.0 at this time, therefore we suggest USB 2.0 for ‘office applications’ only; Video
Playback is not recommend due to USB 2.0 bandwidth limitations causing limited video
performance.

4
Specifications
Interface
Host Interface
USB 3.0 Male Type-A connector
Video Interface
VGA-DB 15 pin Female connector
Ethernet Port
RJ-45 Female connector (Gigabit Ethernet)
USB Port
USB 3.0 Female connector
Power
Power Mode
Bus-powered
Functions
Display
Video Playback: 1080P
Display resolution: 2048 x 1152 @ 32bit
Display Modes: Primary, Extended, Mirror
Display Rotation: 0°, 90°, 180°, 270°
Ethernet
Transfer Rate:
1000 Mbps (Half Duplex) / 1000 Mbps (Full Duplex)
IEEE:
IEEE 802.3az, IEEE 802.3, 802.3u, and 802.3ab, IEEE
802.3x
Modes:
- Supports Wake on LAN function, suspend mode and
remote wakeup via link-change, magic packet, or
Microsoft wakeup frame
-
Supports IEEE 802.1Q VLAN tagging and 2 VLAN ID
filtering
- Supports Jumbo Frame
- Supports Checksum Offload (IPv4, IPv6, TCP, UDP)
and TCP Large Send Offload
Physical Specifications
Dimensions
Main body: 43.75(W)x 90.6(H)x18.6(D) mm
Cable length: 14.5 cm

USB 3.0 MULTI-ADAPTER USER MANUAL
5
Weight
Approximately 58.5 g (including cable)
Video Resolutions and Color Depth Support
Aspect Ratio
Resolution
Color Depth
Wide Screen Display
16:9 2048 x 1152 16,32 bits
16:10 1920 x 1200 16,32 bits
16:9 1920 x 1080 16,32 bits
16:10 1680 x 1050 16,32 bits
16:9 1600 x 900 16,32 bits
16:10 1440 x 900 16,32 bits
16:9 1360 x 768 16,32 bits
16:10 1280 x 800 16,32 bits
15:9 1280 x 768 16,32 bits
16:9 1280 x 720 16,32 bits
Standard Display
4:3 1600 x 1200 16,32 bits
4:3 1400 x 1050 16,32 bits
5:4 1280 x 1024 16,32 bits
4:3 1280 x 960 16,32 bits
4:3 1152 x 864 16,32 bits
4:3 1024 x 768 16,32 bits
4:3
800 x 600
16,32 bits
Package Contents
USB 3.0 Multi-Adapter JUA370
Quick Installation Guide
Driver CD

6
GETTING STARTED
Notes Before Installation
Install the driver completely before inserting the USB cable into your computer
Run the setup program as an administrator to avoid errors in installation
Connect the VGA Cable for the display to the VGA port on the JUA370 first before
connecting the USB cable to the computer
Un-install the previous driver first before installing the latest driver
1. Start the device driver installation (please refer to your PC system OS installation in the next
section) *Note: install driver completely before following steps 2 through 5.
2. Connect the USB 3.0 cable connector to the host laptop
3. Connect the VGA cable for the display device
4. Connect the Ethernet cable
5. Your USB HUB port is now ready to use
INSTALLATION FOR WINDOWS
Device Driver Installation
This section illustrates the simple device driver installation guide for Windows 7 operating system.
When your computer is ready to use, insert the Driver CD into the CD-ROM drive. The setup
program should be launched automatically; if it doesn’t, go to Computer, click on your CD

USB 3.0 MULTI-ADAPTER USER MANUAL
7
drive, and manually run the setup CD. Double Click on Setup.exe to start.
※Make sure the USB cable is unplugged from your PC or Notebook before executing the
installation program.
1. The installation page will be launched. To
start click on Install the Latest Driver. Please
make sure you are connected to the internet
or press Install Driver to start the installation.
2. After pressing the installation option, the
InstallShield Wizard will launch, click Next
to continue.
3. Read the license agreement, check I
accept the terms of the license agreement,
click Next >
4. When the Install Shield Wizard is complete,
select Yes, I want to restart my computer
now. Click Finish to restart.
5. After restarting your computer connect the
USB 3.0 MULTI-ADAPTER USB cable to your
PC or Notebook. The Installing device
driver software message will pop-up.
6. Windows 7:
When the driver software has been
installed successfully the message to the
right will appear on your computer.
Windows XP: An icon ( ) will be seen
on the lower right toolbar. Your driver
software was installed successfully when
the message to the right is shown.
The display functions of the USB3.0 Multi-Adapter will be activated after the computer has
been restarted. You might see the mirror display shown on the display device.

8
Windows 7:
You can modify the corresponding
position of each extend display via
display settings. Go to START →
Control Panel →Appearance and
Personalization →Adjust screen
resolution
※or Right click on the desktop and go
to Screen Resolution
When the Screen Resolution window
pops up, you can identify each
monitor’s number by clicking Identify.
You can drag the monitor to your
preferred location.
Windows XP:
You can modify the corresponding
position of each extended display via
display settings.
Go to Start →Control Panel →Display
Properties →Settings
When the Display Properties window
appears, each monitor’s number can
be identified by clicking Identify.
You can drag the monitor to your
preferred location.
Note:
If your internal graphics card has Dual Display Ports…..
When using one USB 3.0 MULTI-ADAPTER:
The display device that is connected to the 2nd VGA port will be numbered as the 3rd monitor
and the display device that is connected to the USB 3.0 MULTI-ADAPTER will be numbered as
the 2nd monitor.

USB 3.0 MULTI-ADAPTER USER MANUAL
9
Verify Device Driver Installation
Follow the steps below to verify the driver installation status of the USB 3.0 Multi-Adapter
Windows 7:
Right Click My Computer Manager

Device Manager

click +sign of
Network adapter & Sound, video and
game control & Universal Serial Bus
controllers
Windows XP:
Right Click My Computer, Manager →Device Manager click + sign of Display Adapter &
Network adapter & Sound, video and game controllers & Universal Serial Bus controllers
Uninstalling the Device Driver
*Unplug the USB Cable of the USB 3.0 MULTI-ADAPTER before uninstalling the driver
1. Click Start→Control Panel →Programs
and Features→Uninstall or change a
program Select j5 USB 3.0 MULTI-
ADAPTER... Click Uninstall
2. A message will appear confirming that you
want to un-
install the application. Click ‘ok’ to
continue.

10
3. When the driver is completely
uninstalled, select “Yes, I want to restart
my computer now.” Click Finishto
restart.
INSTALLATION FOR MAC
Device Driver Installation
Installing the device driver enables your computer’s operating system to recognize the USB3.0
Multi-Adapter. Be sure that you are referring to the appropriate installation procedure before
you begin installing.
※Make sure the USB cable is unplugged from your Mac Desktop or Mac Notebook before
executing the setup program.
This section illustrates the device driver installation procedure for a computer running Snow
Leopard.
1. Insert the Driver CD into the CD-ROM drive;
and run the .dmg file to load drivers in the
mac install folder
2. The installation page will be launched;
To begin installation click on start Get Last
Driver online, please make sure you are
connected to the internet or press Install Lan
to start the installation.