Jabra Elite 75t Titanium Black User manual

Jabra Elite 75t Wireless Charging - Titanium
Black
How do I manually reset my Jabra Elite/Elite Active 75t to the
default settings?
When you reset your earbuds, current earbud settings and any previous
pairings with mobile devices will be cleared.
Follow these steps to reset.
1. Take the earbuds out of the charging case and ensure they are turned
on.
2. Simultaneously press and hold (approximately 10 seconds) the Right
and Left buttons until the LEDs briefly flash pink (note that the LED
on the right earbud will flash blue repeatedly before it flashes pink).
The earbuds have now been reset. The LED on the right earbud will
automatically turn blue to indicate pairing mode.
Before you re-pair your earbuds with your mobile device, remember to
delete/forget the previous pairing of the Jabra Elite/Elite Active 75t in
the Bluetooth menu. Refer to the user manual of your mobile device for
instructions.
Note
10/01/2024 22:18
https://www.jabra.co.uk/supportpages/jabra-elite-75t/100-99092000-
60/faq/295f0953-af1b-4efc-a4ff-f4ad2174c2f4
Page 1 of 2

You can repeat these steps if you are unsuccessful or to verify the
results.
10/01/2024 22:18
https://www.jabra.co.uk/supportpages/jabra-elite-75t/100-99092000-
60/faq/295f0953-af1b-4efc-a4ff-f4ad2174c2f4
Page 2 of 2