Jabra EASYCALL User manual

USER MANUAL
Jabra EASYCALL

USER MANUAL - LANGUAGES
ENGLISH - ASIA PACIFIC (Click here for manual). . . . . . . . . . . . . . . . . . . . . 3
简体中文（单击此处查看手册） .............................14
繁體中文（按下此處檢視手冊） .............................25
日本語 (取扱説明書をご覧になるには、ここをクリック
してください)
...................................................36
ภาษาไทย (คลิกที่นี่เพื่ออ่านคู่มือ) ........................................49
BAHASA MELAYU (Kullanım kılavuzu için buraya tıklayın) . . . . . . . . . 58
한국어(설명서를 보려면 여기를 클릭하십시오) .............70

1
english
JABRA EASYCALL
CONTENTS
THANKYOU....................................................2
ABOUTYOURJABRAEASYCALL.................................2
WHATYOURHEADSETDOES ...................................3
GETTINGSTARTED..............................................4
CHARGEYOURHEADSET .......................................4
TURNING YOUR HEADSET ON AND OFF . . . . . . . . . . . . . . . . . . . . . . . . . 5
PAIRINGITWITHYOURPHONE .................................5
WEARINGSTYLE................................................6
HOWTO .......................................................7
USING JABRA EASYCALL WITH TWO MOBILE PHONES . . . . . . . . . . . 8
TROUBLESHOOTING&FAQ.....................................9
NEEDMOREHELP?............................................10
TAKING CARE OF YOUR HEADSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
GLOSSARY....................................................11

2
english
JABRA EASYCALL
THANK YOU
Thank you for purchasing the Jabra EASYCALL Bluetooth® wireless
technology headset. We hope you enjoy it! This instruction manual
will get you started and ready to make the most of your headset.
ABOUT YOUR JABRA EASYCALL
A Answer/end button
B On/o button
C StatusDisplayTM With battery indicator and Bluetooth®
connection indicator
D Charging socket
E Volume up/volume down
F Jabra Comfort EargelTM
G Earhook
C
F
A
E
B
D
G

3
english
JABRA EASYCALL
WHAT YOUR HEADSET DOES
Your Jabra EASYCALL lets you do all this:
- Answer calls
- End calls
- Reject calls*
- Voice dialling*
- Last number redialling*
- Call waiting*
- Put call on hold*
- Mute
- Multiuse™ - being connected to two Bluetooth® devices at the
same time
Specications
- Talk time 6 hours
- Standby time 8 days
- Bluetooth® specication version 2.1 with EDR and eSCO
- Weight 8 gram
- Operating range up to 10 meters (approximately 33 feet)
- Supported Bluetooth® proles: HFP, HSP
- Internal rechargeable battery charged by wall charger
- Always see your battery and connection status on the
Jabra StatusDisplay™
- Digital sound enhancement via DSP technology
- Noise reduction on transmitted and received audio
- Noise dependent volume control*
- Automatic volume adjustment on receive audio
- Acoustic shock protection
- e-SCO for enhanced audio quality
- 128 bit encryption
* Phone dependent

4
english
JABRA EASYCALL
GETTING STARTED
Follow these three steps before using your headset:
1. Charge your headset
2. Activate Bluetooth® on your mobile phone (refer to the manual for
your Mobile phone)
3. Pair your headset to your mobile phone
The Jabra EASYCALL is easy to operate. The answer/end button on
the headset performs dierent functions depending on how long
you press it.
Instruction Duration of press
Tap Press briey
Double Tap 2 quickly repeated taps
Press Approx: 1 second
Press and hold Approx: 5 seconds
CHARGE YOUR HEADSET
Make sure that your headset is fully charged for two hours before
you start using it. Use the AC power supply to charge from a
power socket. When the battery indicator has a solid red light,
your headset is charging. When the headset is fully charged
the battery indicator turns solid green for five minutes and is
then turned off.
Use only the charger provided in the box - do not use chargers
from any other devices as this may damage your headset.
Please note: The lifetime of the battery will be signicantly reduced
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.

5
english
JABRA EASYCALL
TURNING YOUR HEADSET ON AND OFF
- Slide the on/off button towards the symbol “I” to turn the
headset ON. When you do so both indicators will ash on the
Jabra StatusDisplay™.
- Slide the on/o button towards the symbol “O” to turn the
headset o.
PAIRING IT WITH YOUR PHONE
Headsets are connected to phones using a procedure called
‘pairing’. By following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
1 Put the headset in pairing mode
- When you turn on your Jabra EASYCALL for the rst time, the
headset will automatically start up in pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the Bluetooth® status indication on the StatusDisplay™ is
ashing.
2 Set your Bluetooth® phone to ‘discover’ the EASYCALL
- Follow your phone’s instruction guide. First make sure that
Bluetooth® is activated on your mobile phone. Then set your
phone to discover new devices. This usually involves going
to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth® device.*
3 Your phone will nd the Jabra EASYCALL
- Your phone will nd the headset under name “Jabra EASYCALL”.
Your phone then asks if you want to pair with the headset.
Accept by pressing ‘Yes’ or ‘OK’ on the phone. You may be
asked to confirm with a passkey or PIN. Then use 0000
(4 zeros). Your phone will conrm when pairing is complete
and the Bluetooth® status indication on the StatusDisplay™ will
shift from ashing light to steady light and the headset voice
guidance will say “connected”.
* Phone dependent

6
english
JABRA EASYCALL
CONNECTIVITY
SELECT
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
DEVICES FOUND
Jabra EASYCALL
Jabra EASYCALL
OK
Passkey:
****
HANDSFREE
SELECT
Jabra EASYCALL
added.
The handsfree is
now ready for use
SELECT
Manual pairing mode
If you wish to use the headset with a dierent phone, or if the
pairing process was interrupted, you can manually set the headset
to pairing mode.
Make sure the headset is on. Press and hold the answer/end button
for approximately 5 seconds until the Bluetooth® icon turns from
a steady light to a ashing light. Then repeat steps 2 and 3 in the
above pairing guide.
Connecting with your phone
Pairing is only needed the rst time a headset and phone are
used together. When the headset and phone have been paired
once, they will automatically connect when the headset is on and
Bluetooth® is activated on the phone. The headset can be used
when it is “connected” to the phone. If the devices are paired, but
do not immediately connect, tap the answer/end button. When
your headset is connected the Bluetooth® connection icon in the
STATUSDISPLAY™ WILL BE CONSTANT ON FOR 3 SECONDS and
the headset voice guidance will say “connected”.
WEARING STYLE
The Jabra EASYCALL is ready to be worn with or without the ear
hook. The ear hook can be removed and the headset can be used
with the Ultimate-t Eargels™.
The Ultimate-t Eargels™ can be used for both left and right wearing.
The Ultimate-t Eargels™ come in two dierent styles to t any ear.
You can also twist the eargel slightly to optimize the t and comfort.
For optimal performance, wear the Jabra EASYCALL and your
mobile phone on the same side of your body or within line of sight.
You will get better performance when there are no obstructions
between your headset and your mobile phone.

7
english
JABRA EASYCALL
HOW TO
Answer a call
- Tap the answer/end button on your headset to answer a call.
End a call
- Tap the answer/end button to end an active call.
Reject a call*
- Press the answer/end button when the phone rings to reject an
incoming call. Depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
will hear a busy signal.
Make a call
- When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset. If your phone does not allow this feature, tap on the
Jabra EASYCALL’s answer/end button to transfer the call to the
headset.
Activate voice dialling*
- Press the answer/end button. For best results, record the voice
dialling tag through your headset. Please consult user manual
of your phone for more information about using this feature.
Redial last number*
- Double tap the answer/end button when the headset is on and
not used.
Adjust sound and volume*
- Tap the volume up or down to adjust the volume.
Mute/un-mute
- To mute, press both volume up and down at the same time.
A low beep alert plays during a muted call.
- To un-mute, tap either of the volume buttons.
* Phone dependent

8
english
JABRA EASYCALL
Call waiting and placing a call on hold*
- This lets you put a call on hold during a conversation and
answer a waiting call.
- Press the answer/end button once to put the active call on
hold and answer the waiting call.
- Press the answer/end button to switch between the two calls.
- Tap the answer/end button to end the active conversation.
HOW THE STATUSDISPLAY™ WORKS
Bluetooth®
Indicator
Indicates if your headset is connected to your
phone
- Solid light means headset is connected to your
phone
- Flashing light means headset is in ‘pairing mode’
and ready to be connected to a new phone
Battery
Indicator
Indicates battery level and if headset is turned ON
- Green light indicates that the headset has more
than 30 minutes of talk time remaining
- Red light indicates that the headset has less
than 30 minutes of talk time remaining
To save battery the Jabra StatusDisplay™ is turned o after 3 seconds.
Get an instant status from the Jabra StatusDisplay™ by a tap on any
button on the headset when you are not on a call.
HOW THE VOICE GUIDANCE WORKS
When your headset has established a connection to your phone (or
other Bluetooth® device) the voice guidance will say “connected”.
When your headset has less than 30 minutes talk time remaining
the voice guidance will say “low battery”.
USING JABRA EASYCALL WITH TWO MOBILE PHONES
Jabra EASYCALL is capable of having two mobile phones (or
Bluetooth® devices) connected to the headset at the same time.
This will give you the freedom of having only one headset to
operate both your mobile phones.
* Phone dependent

9
english
JABRA EASYCALL
In order to use the headset with two mobile phone please make
sure you have ”paired” the Jabra EASYCALL with both phones. See
the section “PAIRING IT WITH YOUR PHONE” for instructions.
Once you have “paired” your headset with two phones simply
make sure your headset is on, and that Bluetooth® is enabled on
the phones and the headset will then automatically connect to
both phones.
Please note that Last Number Redial will dial the number from
the last outgoing call, independent of the mobile phone, and the
Voice Dialling function will only work on the last paired mobile
phone.
TROUBLESHOOTING & FAQ
I hear crackling noises
- Bluetooth® is a radio technology, which means it is sensitive to
objects between the headset and the connected device. It is
designed for the headset and the connected device to be used
within 10 meters (33 feet) of each other, with no major objects
in the way (walls, etc.).
I cannot hear anything in my headset
- Increase the volume in the headset.
- Ensure that the headset is paired to a device that is playing.
- Make sure your phone is connected to the headset by tapping
the Answer/End button.
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone. Follow the pairing instructions.
I want to reset the headset
It is possible to reset the headset. Turn the headset ON. Then
’Press and hold’ the volume down and answer/end buttons at
the same time for approx. 5 seconds until the battery icon and
Bluetooth® icon flash 5 times simultaneously - then the pairing
list is reset.
- Turn the headset OFF . The next time you power on, the headset
will go into pairing mode as the rst time you powered your
new EASYCALL on.

10
english
JABRA EASYCALL
Will the Jabra EASYCALL work with other Bluetooth® equipment?
- The Jabra EASYCALL is designed to work with Bluetooth®
mobile phones. It can also work with other Bluetooth® devices
that are compliant with Bluetooth® version 1.1 or higher and
support a headset and hands-free prole.
I cannot use Reject call, call on hold, Redial or voice dialling
These features are dependent on the ability of your phone to
support a hands-free prole. Even if the hands-free prole is
implemented reject call, call hold and voice dialling are optional
features which are not supported by all devices. Please consult
your device manual for details.
Please note that some features can only be operated from the
primary device e.g. voice dial using Jabra EASYCALL with 2 mobile
phones.
NEED MORE HELP?
1. Web: http://www.jabra.com
(for the latest support info and online User Manuals)
2. E-mail:
Australia [email protected]
China suppor[email protected]
Japan suppor[email protected]
Singapore [email protected]
Information: [e-mail]
3. Phone:
Australia 1-800-738-521
China 800-858-0789
Japan 03-3242-8722
Singapore 800-101-2329

11
english
JABRA EASYCALL
TAKING CARE OF YOUR HEADSET
- Always store the Jabra EASYCALL with the power o and safely
protected.
- Avoid storage at extreme temperatures (above 45°C/113°F –
including direct sunlight – or below -10°C/14°F). This can shorten
battery life and may aect operation. High temperatures may
also degrade performance.
- Do not expose the Jabra EASYCALL to rain or other liquids.
GLOSSARY
1. Bluetooth® is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords over
a short distance (approx. 10 meters/33 feet). Bluetooth® is safe
to use. It is secure too, so once a connection has been made
no-one can listen in and there is no interference from other
Bluetooth® devices either. Get more information at
www.bluetooth.com.
2. Bluetooth® proles are the dierent ways that Bluetooth®
devices communicate with other devices. Bluetooth® phones
support the headset prole, the hands-free prole or both. In
order to support a certain prole, a phone manufacturer must
implement certain mandatory features within the phone’s
software.
3. Pairing creates a unique and encrypted link between two
Bluetooth® devices and lets them communicate with each
other. Bluetooth® devices will not work if the devices have not
been paired.
4. Passkey or PIN is a code that you enter on your Bluetooth®
enabled device (e.g. a mobile phone) to pair it with your
Jabra EASYCALL. This makes your device and the Jabra EASYCALL
recognize each other and automatically work together.
5. Standby mode is when the Jabra EASYCALL is passively
waiting for a call. When you ‘end’ a call on your mobile phone,
the headset goes into standby mode.
Dispose of the product according
to local standards and regulations.
www.jabra.com/weee

1
简体中文
JABRA EASYCALL 捷波朗易用
目录
感谢 ...........................................................2
关于您的 JABRA EASYCALL 捷波朗易用........................2
耳机功能 ......................................................3
入门 ...........................................................4
为耳机充电 ....................................................4
开启和关闭耳机 ...............................................4
将耳机与手机配对 .............................................5
佩戴方式 ......................................................6
使用方法 ......................................................6
在两部手机上使用 JABRA EASYCALL 捷波朗易用 ..............8
故障排除和常见问题解答......................................8
需要更多帮助吗？ ............................................10
呵护您的耳机.................................................10
术语表 ........................................................11

2
简体中文
JABRA EASYCALL 捷波朗易用
感谢
感谢您购买 Jabra EASYCALL 捷波朗易用蓝牙无线技术耳机。希
望您能喜欢！本说明手册将帮助您了解和充分利用您的耳机。
关于您的 JABRA EASYCALL 捷波朗易用
A 接听／结束按钮
B 打开／关闭按钮
C
带电量指示灯和蓝牙连接指示灯的状态显示屏 StatusDisplayTM
D 充电插孔
E 上调音量／下调音量按钮
F Jabra Comfort EargelTM
G 耳勾
C
F
A
E
B
D
G

3
简体中文
JABRA EASYCALL 捷波朗易用
耳机功能
使用 Jabra EASYCALL 捷波朗易用耳机可以：
- 接听来电
- 结束通话
- 拒绝来电*
- 语音拨号*
- 重拨最后一个拨出号码*
- 呼叫等待*
- 通话保持*
- 静音
-
多点连接 Multiuse™ —同时连接两台蓝牙设备
规格
- 通话时间 6 小时
- 待机时间 8 天
- 蓝牙 2.1 规范，支持 EDR 和eSCO
- 重8 克
- 工作范围达 10 米（约 33 英尺）
- 支持的蓝牙模式：HFP、HSP
- 内置式可充电电池，使用交流电源 充电器充电
-
在Jabra 状态显示屏 StatusDisplay™ 上可随时查看电池和连接
状态
- 采用 DSP 技术增强数字音效
- 音频传输和接收降噪
- 随噪音变化的音量控制*
- 接收音频时自动调整音量
- 声震保护
- 可大大提升音质的 e-SCO 技术
- 128 位加密技术
* 因手机而异

4
简体中文
JABRA EASYCALL 捷波朗易用
入门
在使用耳机之前，您应执行三个步骤：
1. 为耳机充电
2.
激活手机的蓝牙功能（请参见手机的手册）
3. 将耳机与手机配对
JabraEASYCALL
捷波朗易用操作起来非常简单。耳机上的“接听／
结束”按钮按下的时间不同，执行的功能也会不同。
说明 按下的时间长度
轻按 快按
按两次 快速重复轻按 2 次
按下 大约 1 秒钟
按住 大约 5 秒钟
为耳机充电
确保您的耳机已完全充电两个小时，然后再开始使用。请通过
电源插座使用交流电源充电。当电量指示灯呈红色长亮时，表
示耳机正在充电。当耳机完全充电时，电量指示灯将变为绿色
长亮，并在五分钟后熄灭。
请只使用随包装盒提供的充电器，而不要使用任何其它设备的
充电器，否则可能损坏耳机。
请注意：如果长时间不对耳机充电，电池寿命会大大缩短。因
此建议您每月至少为耳机充一次电。
开启和关闭耳机
-
将“打开／关闭”按钮滑向 "I" 标记可开启耳机。执行该操
作时，Jabra 状态显示屏 StatusDisplay™ 上的两个指示灯都会
闪烁。
-
将“打开／关闭”按钮滑向 "O" 标记可关闭耳机。

5
简体中文
JABRA EASYCALL 捷波朗易用
将耳机与手机配对
耳机通过一个称为“配对”的过程与手机建立连接。只需执行
几个简单的步骤，即可在数分钟内将耳机与手机配对。
1 使耳机处于配对模式
-
当首次开启 Jabra EASYCALL 捷波朗易用耳机时，它会自动在配
对模式下启动，以使您的电话能够发现它。耳机处于配对模式
时，状态显示屏 StatusDisplay™ 上的蓝牙状态指示将会闪烁。
2 设置蓝牙手机，使之“发现”Jabra EASYCALL 捷波朗易用
- 按照电话的说明书指南进行操作。首先确保已激活手机的
蓝牙功能，然后设置手机使其找到耳机。这通常包括进入电
话的“设置”、“连接”或“蓝牙”菜单并选择用来“发
现”或“添加”蓝牙设备的选项。*
3 您的手机将找到 Jabra EASYCALL 捷波朗易用耳机
- 手机将找到名为“Jabra EASYCALL 捷波朗易用”的耳机，然
后，手机将询问您是否希望与该耳机配对。按手机上的“
是”或“确定”接受配对。如果手机要求您输入密码或
PIN 码确认，请输入 0000（4 个零）。手机会在完成配对时
进行确认，状态显示屏 StatusDisplay™ 上的蓝牙状态指示将
从闪烁状态切换为长亮状态，耳机的语音提示也将指示
“connected（已连接）”。
CONNECTIVITY
SELECT
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
DEVICES FOUND
Jabra EASYCALL
Jabra EASYCALL
OK
Passkey:
****
HANDSFREE
SELECT
Jabra EASYCALL
added.
The handsfree is
now ready for use
SELECT
手动配对模式
如需将耳机用于其它手机，或遇到配对过程中断的情况，您可
以手动将耳机设置为配对模式。
请确保耳机已经开启。按住“接听／结束”按钮约 5 秒，直到
蓝牙图标从长亮变为闪烁。然后重复上述配对指南中的步骤 2 和
步骤 3。
* 因手机而异

6
简体中文
JABRA EASYCALL 捷波朗易用
连接手机
耳机与手机仅在首次配合使用时需要配对。当耳机与手机完成首
次配对之后，只要耳机开启且手机已激活蓝牙功能，它们就会自
动连接。耳机在“已连接”到手机时即可使用。如果耳机与手机
已配对但没有立即连接，请轻按“接听／结束”按钮。如果耳
机已经连接好，状态显示屏 StatusDisplay™ 上的蓝牙连接图标将
会长亮 3 秒钟，耳机语音提示也将指示“已连接 (connected)”。
佩戴方式
Jabra EASYCALL 捷波朗易用随时可用，无论有无耳勾均可佩戴。
您可以取下耳勾，通过 Ultimate-t Eargels™ 来使用耳机。
Ultimate-t Eargels™ 在左右耳上均可佩戴。随机附送的 Ultimate-t
Eargels™ 共有两种样式可供使用，完全适合所有人佩戴。耳塞可
轻轻扭转，令您更感舒适贴合。
为了获得最佳性能，请将 Jabra EASYCALL 捷波朗易用和移动电
话佩戴在身体的同一侧或保持二者在视线范围内。当耳机与手
机之间没有任何障碍物时，您通常会获得更好的通话性能。
使用方法
接听来电
- 轻按耳机上的“接听／结束”按钮接听来电。
结束通话
- 轻按“接听／结束”按钮结束当前通话。
拒绝来电*
- 当电话铃声响起时，按下“接听／结束”按钮可以拒绝来
电。根据您的电话设置，拨打来电的人会被转接到语音信箱
或者听到忙音。
拨打电话
-
使用手机拨打电话时，呼叫会自动转移到耳机（由电话的设
置控制）。如果手机不支持此功能，则轻按 Jabra EASYCALL
捷波朗易用的“接听／结束”按钮可将呼叫转移到耳机。
* 因手机而异

7
简体中文
JABRA EASYCALL 捷波朗易用
激活语音拨号*
-
按“接听／结束”按钮。为了获得最佳效果，请通过耳机录
下语音拨号标签。有关使用此功能的详细信息，请参考您的
手机用户手册。
重拨最后一个拨出号码*
- 在耳机开启且未通话时轻按两次“接听／结束”按钮。
调节声音和音量*
- 轻按上调音量或下调音量按钮，调节音量大小。
静音／取消静音
- 要设置静音，同时按下上调音量和下调音量按钮。静音呼叫
时会发出鸣叫提示。
- 要取消静音，轻按任一音量按钮。
来电待接和暂停通话*
- 此功能允许您在通话期间保持当前通话并接听等待的来电。
- 按一次“接听／结束”按钮可以使当前的电话处于保持状态
并接听等待的电话。
- 之后再按“接听／结束”按钮则可在这两个电话之间切换。
- 轻按“接听／结束”按钮可以结束当前的通话。
状态显示屏 StatusDisplay™ 工作方式
蓝牙
指示灯
指示耳机是否已连接到电话
-
长亮表示手机已连接到电话
-
闪烁表示耳机处于“配对”模式，并准备好连
接到新的手机
电量
指示灯
指示电池电量以及耳机是否已经开启
-
绿灯表示耳机剩余通话时间超过 30 分钟
-
红灯表示耳机剩余通话时间少于 30 分钟
* 因手机而异