Jabra Elite 25e User manual

How do I pair my Jabra Elite 25e with my mobile device?
Jabra Elite 25e
To pair your Jabra Elite 25e with your smartphone, tablet, or other mobile
device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off your Jabra Elite 25e by pressing and holding (5 seconds) the
Multi-function button until the LED flashes red.
3. To enter pairing mode, press and hold (5 seconds) the Multi-function
button until the LED flashes blue (minimum of 4 flashes).
Pairing mode is announced in the earbuds and the LED continues to
flash blue.
4. To pair, go to the Bluetooth menu on your mobile device and select the
07/04/2021 12:55
https://www.jabra.no/supportpages/jabra-elite-25e/100-98400000-60/faq/64b5b792-
4bc2-49b3-8aa6-729a1880ccf8
Side 1 av 2

Jabra Elite 25e from the list.
Enter “0000” (four zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with a mobile device.
07/04/2021 12:55
https://www.jabra.no/supportpages/jabra-elite-25e/100-98400000-60/faq/64b5b792-
4bc2-49b3-8aa6-729a1880ccf8
Side 2 av 2