6
english
Jabra EXTREME FOR PC
PAIRING YOUR HEADSET WITH YOUR PHONE
Headsets are connected to phones using a procedure called
‘pairing’. By following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
1. Put the headset in pairing mode
- When you turn on your Jabra EXTREME for the rst time, the
headset will automatically start up in pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the LED is constantly lit blue.
2. Set your Bluetooth® phone to‘discover’ the Jabra EXTREME
- Follow your phone’s instruction guide. First make sure that
Bluetooth® is activated on your mobile phone. Then set your
phone to discover the headset. This usually involves going
to a‘setup,’‘ connect’or ‘Bluetooth®’menu on your phone and
selecting the option to ‘discover’or ‘add’a Bluetooth® device.*
3. Your phone will nd the Jabra EXTREME
- Your phone will nd the headset under name “Jabra EXTREME
”.
Your phone then asks if you want to pair with the headset.
Accept by pressing‘Yes’or ‘OK’ on the phone and conrm with
the passkey or PIN = 0000 (4 zeros). Your phone will conrm
when pairing is complete.
EXTREME
EXTREME
EXTREME
In case of unsuccessful pairing, put the Jabra EXTREME into pairing
mode manually. Make sure the headset is on. Press and hold the
answer/end button for approximately 5 seconds until the LED has a
constant light. Keep holding down the button until light is constant.
WEARING STYLE
The Jabra EXTREME is ready to be worn with or without the ear
hook. The ear hook can be removed and the headset can be used
with the Ultimate-t EargelsTM.
The Ultimate-t EargelsTM can be used for both left and right wearing.
* Phone dependent / For use with PC, Jabra PC Suite needs to be installed and
running on PC
