Jabra Jabra BH870 User manual

Getting started with
Première utilisation
BH870 Wireless Bluetooth® Headset
Logitech for Business

BH870 Wireless Bluetooth® Headset
2
Contents
English. . . . . . . . . . . . . . . . . .4 Français . . . . . . . . . . . . . . . . 12
www.logitech.com/support . . . . . . . . . . . . . . . . . . . . . . . . . . 20

BH870 Wireless Bluetooth® Headset
3
Getting started with
Première utilisation
BH870 Wireless Bluetooth® Headset
Logitech for Business

BH870 Wireless Bluetooth® Headset
44 English
1
2
4
3
5
6
7
Figure 1: BH870 Wireless Bluetooth Headset diagram
14
5
2
6
3
Figure 2: Travel charger and USB Bluetooth® adapter diagrams

BH870 Wireless Bluetooth® Headset
5English 5
BH870 Wireless Bluetooth
Headset diagram
1. Multifunction button (answer/end call,
among other functions)
2. Touch panel for volume and mute control
3. Dual noise-blackout microphone
4. Activity and status indicator
(multicolor LED)
5. Earbud (with speaker)
6. Mount for ear-hook wearing-style
attachment
7. Recharge contact
Figure 1: BH870 headset as seen from the outer
and inner sides, respectively
Travel charger and USB
Bluetooth® adapter diagrams
1. Headset cradle
2. Power port
3. USB Bluetooth® adapter cradle
4. USB plug
5. LED activity indicators
6. Multifunction button
Figure 2: Travel Charger (left) and USB Bluetooth®
adapter (right)

BH870 Wireless Bluetooth® Headset
66 English
Installation and setup
Step 1: Connect power to the travel charger
Connect the mini-USB port on the
Travel Charger to one of the following
power sources:
• any USB port on a powered-on
computer via the supplied mini-USB-to-
USB cable (charge time is longer when
connected to a PC)
• a mains power socket via the supplied
mains power adapter
• a car’s cigarette lighter via the car
charge adapter (optional accessory)
Step 2: Insert the headset into the travel charger
See the figure below: The headset LED shows the current charge
status: red (low; <10%), yellow (medium;
10–<100%) or green when fully charged.
Allow the headset to charge until it lights
yellow or green before continuing (usually
the headset ships with a partial charge).
12V
USB

BH870 Wireless Bluetooth® Headset
7English 7
Step 3: Adjust the headset wearing‑style
The headset is delivered already attached
to the ear hook wearing style, shown below
alongside the headband (available as an
optional accessory).
Slide the hook’s attachment up or down
in the hinge-like mount on the headset
as shown, until the headset fits most
comfortably to your ear.
When you put on the headset, always
ensure that the microphone is positioned
as close to your mouth as possible. This
maximizes the noise-cancelling eect of
its microphone and ensures that your voice
comes through loud and clear.

BH870 Wireless Bluetooth® Headset
88 English
Step 4: Connect the headset
Connect the headset to your mobile phone
1. If your headset is currently turned
on, turn it o—press and hold its
multifunction button for about
4 seconds.
Its LED gives four quick flashes and then
turns o.
2. Put your (powered-o) headset into
Bluetooth® pairing mode—press and
hold its multifunction button for about
4 seconds.
In pairing mode, its LED lights a
constant blue.
3. Use the menu system of your mobile
phone to put it into Bluetooth pairing
mode (see also your mobile-phone
documentation).
Your mobile phone shows a list of
discovered devices.
4. Use the phone’s controls to select the
BH870 device.
The phone will then ask for the headset’s
pass code, which is 0000 (four zeros)
for all BH870 headsets.
4 sec.

BH870 Wireless Bluetooth® Headset
9English 9
5. Enter the pass code on your phone. Your phone now pairs with and connects
to the headset.
6. Accept the connection on the phone.
Connect the headset to your computer
1. Plug the BH870 USB Bluetooth® Adapter
into a free USB port on your PC.
Note: The headset and USB Bluetooth® Adapter
are paired at the factory, so you should not need
to pair them. Please see the BH870 User manual
for details on how to pair with a new adapter or
to re-establish pairing, if needed.
2. Open your softphone application and
view the audio configuration to ensure
that the BH870 headset is selected as
the target for speaker and microphone.
If you would like to learn more on how to use the
many advanced features of your headset solution,
please refer to the full user manual.
(www.logitech.com/BH870_support)
“0000”
www.logitech.com/BH870_support
USB

BH870 Wireless Bluetooth® Headset
1010 English
Daily Use
To make a call:
1. Dial the number as usual, using your
standard mobile-phone keypad or
softphone interface.
2. Press the call button on your mobile or
softphone. The audio connection to your
headset opens automatically.
3. To hang up, either tap the headset
multifunction button or click on the
end-call button of your mobile phone
or softphone.
To answer an incoming call:
1. When a call comes in on your mobile or
softphone, you will hear a ring tone in
the headset (the tone indicates which
phone is calling).
2. To answer the call, either tap the headset
multifunction button or click on the
answer-call button of your mobile or
softphone. The headset automatically
answers the phone that is ringing.