Jabra Pro 9470Mono User manual

How do I connect my headset with my Alcatel IP Touch
4028EE, 4038EE or 4068EE?
Jabra Pro 9470 Mono
Requirements:
Jabra Link 14201-20
To connect your headset, please follow these steps:
1. Plug one end of the phone cable supplied with your Jabra device into
the socket marked phone on your Jabra device base
2. Plug the other end of that cable into the socket marked with a phone
symbol on the EHS adapter
3. Plug the red end of the cable (EHS adapter) to the socket marked AUX
on the EHS adapter
4. Plug the other end into the AUX socket on your Jabra device base
5. Plug the cable marked white and “D” to the socket marked
Headset/handset on the EHS adapter
6. Plug the other end to the headset socket on your phone
7. Plug the orange cable marked “A” to the socket marked COM on the
EHS adapter
8. Plug the other end of that cable to the “bell” socket on your phone
Please be aware that the device will not be fully functional until the
colored markings for all cables have been connected to the EHS adapter
(see photo).
05/04/2021 16:19
https://www.jabra.ca/supportpages/jabra-pro-9470/9470-66-904-105/faq/0dcea0e7-
995b-4938-93f0-35faf9ad6add
Page 1 of 4

9. Follow the instructions on the Jabra device touchscreen:
a. Select Phone setting
b. Select Connect to a desk phone
c. Select Manual
d. Select adapter type DHSG
10. Jabra device base setting phone setup switch should be set to A.
11.We recommend microphone level should be set to 7 out of 13
05/04/2021 16:19
https://www.jabra.ca/supportpages/jabra-pro-9470/9470-66-904-105/faq/0dcea0e7-
995b-4938-93f0-35faf9ad6add
Page 2 of 4

Guided setup:
As a part of the installation, you can dial into your local Jabra Setup server
which will configure the audio path. Please follow the instructions shown
on the display. If your Jabra Setup server is unavailable, please contact
your local Jabra Support team.
Phone settings with device software version 9.xx and higher:
Phone settings are no longer required. Once the phone connector has been
adapted correctly, a headset symbol should appear in the phone display. If
the headset symbol does not appear, please check the following settings:
Menu>Settings>Phone>Phone connector>Activate/select handset
Phone settings with device software lower than version 9.xx:
Please note that the “Force Headset” function must not be activated on
the device as this will prevent you from accepting external calls.
Menu>Settings>Phone>Phone connector>Force headset OFF
Menu>Settings>Phone>Socket>Activate headset
Ringtone signal/phone settings:
Please note that the ringtone signal on the headset will only be
transferred if one of the following ringtones has been selected:
Standard/Classic/Cold River/Dooing-Dooing
Menu>Settings>Rington>Internal/External
The following options need to be set to OFF:
05/04/2021 16:19
https://www.jabra.ca/supportpages/jabra-pro-9470/9470-66-904-105/faq/0dcea0e7-
995b-4938-93f0-35faf9ad6add
Page 3 of 4

No tone, Progressive, Beeps
05/04/2021 16:19
https://www.jabra.ca/supportpages/jabra-pro-9470/9470-66-904-105/faq/0dcea0e7-
995b-4938-93f0-35faf9ad6add
Page 4 of 4