Jabra SUPREME User manual

User manual
www.jabra.com
Jabra®SUPREME

1
english
JABRA SUPREME
Contents
THANK YOU....................................................2
ABOUT YOUR JABRA SUPREME.................................2
WHAT YOUR HEADSET CAN DO ................................3
GETTING STARTED .............................................4
CHARGE YOUR JABRA SUPREME ...............................4
TURNING YOUR HEADSET ON AND OFF........................5
PAIRING IT WITH YOUR PHONE/DEVICE ........................6
PAIR A NEW OR SECOND DEVICE ...............................6
CONNECTING WITH YOUR PHONE..............................7
HOW TO .......................................................8
JABRA VOICE FEATURES.......................................10
ADDITIONAL FEATURES.......................................12
TROUBLESHOOTING & FAQ ...................................14
NEED MORE HELP?............................................15
TAKING CARE OF YOUR HEADSET .............................17
GLOSSARY ....................................................17

2
english
JABRA SUPREME
tHAnK YoU
Thank you for purchasing the Jabra SUPREME Bluetooth®
headset. We hope you enjoy it! This instruction manual will get
you started and ready to make the most of your headset.
ABoUt YoUR JABRA sUPReMe
A Volume up
Tap to adjust volume up
B Micro USB charging connector
Charge with the Micro USB charger
C Volume down
Tap to adjust volume down
D Answer/end button
Tap to answer/end call
E Jabra StatusDisplayTM
F On/Off flip
G Voice Control button
Tap to initiate voice command functions
G
F
E
D
C
B
A

3
english
JABRA SUPREME
* Phone dependent
WHAt YoUR HeAdset CAn do
Your Jabra SUPREME lets you do all this:
- Make and answer calls just using your voice
- Ease of use with Jabra Voice Guidance
- Last number redialing and call back last number
- Voice dialing*
- Three way calling*
- Advanced MultiUse™ - be connected to two active Bluetooth
devices at the same time
- Tells you who is calling*
Specifications:
- Up to 6 hours of talk time and 15 days of standby time
- Rich sound and ambient noise reduction by Active Noise
Cancellation
- Noise Blackout(tm) 3.0 dual microphones technology provides
outstanding background noise reduction
- Digital sound enhancements via DSP technology
- Clear wireless streaming of you r favorite multimedia: Music,
GPS, podcasts, video, etc. (from A2DP enabled devices*)
- Bluetooth technology – Easy pairing with Bluetooth 3.0
EDR & eSCO
- Supported Bluetooth profiles: HFP, HSP, A2DP, PBAP
- Up to 128-bit encryption
- Rechargeable battery with charging option from AC charger or
PC using the supplied USB cable
- Operating range up to 10 meters (approximately)
- Weight 18 grams
- Size: 89.7 mm x 29.9 mm x 21.9 mm

4
english
JABRA SUPREME
GettInG stARted
Please follow these steps before using the Jabra SUPREME:
1 Charge the Jabra SUPREME using the supplied AC charger and
USB cable.
2 Activate Bluetooth® on your phone or device (refer to the
manual of your device)
3 Turn your Jabra SUPREME on by ipping open the boom, and
pair it with your mobile device by following the voice guidance.
NOTE: Voice Guidance and Voice commands are enabled as the
default setting when you turn on your Jabra SUPREME the first
time. You can at any time disable both by pressing the Voice
button while you flip the boom arm to On position. You will
hear a tone and SUPREME will no longer talk to you or listen for
commands. Repeat the process to enable the voice features again.
CHARGe YoUR JABRA sUPReMe
Make sure that your headset is fully charged before you start
using it. Use the USB cable to connect Jabra SUPREME to a
USB port or use an AC charger. The battery indicator light will
Flash Green while charging. When light goes out the charge is
complete. A full charge takes approximately two hours. .
Only use the charger provided in the box – do not use chargers
from other devices as this may damage your headset. Also you
should not use your supplied SUPREME charger to charge other
devices.
NOTE: The lifetime of the battery will be signicantly reduced
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.
WeARInG stYLe
The Jabra SUPREME is ready to be worn for right ear wearing, but
if you prefer left ear wearing remove the ear hook and turn it and

5
english
JABRA SUPREME
attach it from the opposite side. The ear cushions come in two
different styles to fit any ear. Furthermore you can twist and bend
the lower part of the earhook to optimize.
tURnInG YoUR HeAdset on And oFF
- Flip the boom arm to turn on (open position) or turn o (closed
position).

6
english
JABRA SUPREME
Pair new
device
PAIRInG It WItH YoUR PHone/deVICe
Bluetooth® Headsets are connected to mobile phones/devices
using a procedure called ‘pairing’. By following a few simple steps, a
phone/device can be paired with a headset in a matter of seconds.
1 Activate Bluetooth® on your phone/device
2 Turn the Jabra SUPREME on
3 The rst time you turn the Jabra SUPREME on it will
automatically enter into pairing mode. The connectivity icon
on the Status Display will ash with a blue light and you will be
voice guided through the pairing process.
If you have disabled the Voice guidance go to the Bluetooth
settings menu on your phone/device and search for new
Bluetooth devices. Choose Jabra SUPREME. When pairing is
complete Status Display will shift from ashing to steady light.
You are now ready to start using your Jabra SUPREME.
NOTE: If asked for a passkey or pin code use 0000 (four zeros)
PAIR A neW oR seCond deVICe
1 Ensure that the Jabra SUPREME is turned on
2 Tap the Voice button. You will be asked to ”Say a command”
3 Say ”Pair new device” and follow the instructions
4 If this is your second device you will need to reconnect to the
rst device afterwards

7
english
JABRA SUPREME
NOTE: If you have disabled Voice Guidance and Control you can
put Jabra SUPREME in pairing mode manually by holding the
Answer/end button while ipping the boom arm to On position.
The Status Display will ash blue to indicate that you are in pairing
mode.
ConneCtInG WItH YoUR PHone
Pairing is only needed the rst time a headset and a phone/device
are used together. When the headset and phone/device have
been paired once they will automatically reconnect when the
headset is on and Bluetooth® is activated on the phone/device.
If the devices are paired, but do not reconnect, tap the Answer/
end button.

8
english
JABRA SUPREME
* Phone dependent
** Refer to phone’s user manual
HoW to
The Jabra SUPREME is easy to operate. The buttons performs
dierent functions depending on how long you press them.
Instruction Duration of press
Tap Press briey
Double tap Press briey two times within 1/2 second
Press Approx: 1-3 second
Long press Approx: 4-5 seconds
Extra long press Approx: 5-10 seconds
Answer a call
- Tap the Answer/End button
- Say“Answer”after the caller is announced.*
End a call
- Tap the Answer/End button
Reject/ignore a call*
- Double Tab the Answer/End button when the phone rings to
reject an incoming call. Depending on your phone settings, the
person who called you will either be forwarded to voice mail or
hear the busy signal
- Say“Ignore” after the caller is announced.*
Make a call*
- Tap the Voice button and you will be prompted to“Say a
command”. You can then:
- Say ”Redial” to redial last outgoing number
- Say ”Call back”to call back the last incoming number*
- Say ”Phone commands” to activate the voice dialing feature on
your phone**

9
english
JABRA SUPREME
* Phone dependent
** Refer to phone’s user manual
- You can also place a call directly from your phone. If your
phone is connected it will automatically transfer the call to your
Jabra SUPREME*. If the call does not transfer, tap the Answer/
end button.
Last number redial*
- Double tap the Answer/End button
Activate Voice dialing**
- Press the Answer/end button to activate the phones voice
dialing or tap the Voice button and say“Phone commands”.*
BATTERY STATUS*
- When on standby tap the voice button and say“Battery“.
Mute/un-mute microphone
- During a call, tap the Voice Control button to mute the
microphone. To un-mute, tap the Voice Control button again.
Adjust sound and volume
- Tap the Vol- or Vol+ buttons to adjust the volume when on a
call or listening to multimedia on your Jabra SUPREME.
Three way calling*
- Press the Answer/end button to switch to call on hold. Press
the Answer/end button to switch back to rst call.
Play music*
- If your phone supports A2DP audio streaming then you can
transfer music or any other type of audio to the SUPREME.
Answer a call while playing music*
- If you have an incoming call while listening to music on the
Jabra SUPREME the music will pause and you will hear your
ringtone or caller ID. You can then chose to answer or ignore
the call. After the call the music will start to play again*.

10
english
JABRA SUPREME
JABRA VoICe FeAtURes
Type Definition
Voice Control Your voice in action, where you guide
the headset
Voice Guidance The headset plays voice
announcements to you
When you have an incoming call you can answer or ignore just
using you voice. You do not have to touch Jabra headset or you
phone. Just say“Answer” to take the call and“Ignore”to reject.
Voice control – Incoming call
Your voice to SUPREME What it does
“Answer” The headset captures your
command and directs the phone to
take the call
“Ignore” The headset captures your
command and directs the phone to
reject the call
At any time when you are connected to a phone and not in a call
or streaming multimedia, you can tap the Voice button, wait for
Jabra SUPREME to ask you to ”Say a command”, and then say one
of the following commands.
Voice control – Outgoing calls, pairing, battery level etc.
Your Voice to SUPREME What it does
”Pair new device” Puts the SUPREME into pairing
mode
”Redial” SUPREME redials the last outgoing
call made on the phone
”Call back” Calls back the last incoming call
recieved on the SUPREME

11
english
JABRA SUPREME
* Phone dependent
”Phone commands” Activates your phone’s voice dialing
feature*
”Battery” Will tell you the battery level on
SUPREME
”What can I say?” Will tell you what your options are
”Cancel” Will cancel the current operation
and close the voice menu
The Jabra SUPREME is loaded with voice guidance that talks you
through setup and daily operation. in the table below you can see
the most common announcements.
Voice guidance
SUPREME
announcements to you
What it means
“Welcome! You are now
ready for pairing. Go to
the Bluetooth menu on
your phone.
Turn on or enable
Bluetooth.
Search for devices and
select your Jabra hands
free device. Select pair
or OK. If asked for a PIN
code enter 0000”
The SUPREME is in pairing mode.
Announced automatically when
powered on the rst time and
whenever SUPREME is put into
pairing mode.
”Pairing failed” Announced if pairing fails
“Connected” Announced when SUPREME is
connected to a phone
“Two devices connected” Announced when SUPREME is
connected to two phones/devices

12
english
JABRA SUPREME
* Phone dependent
”Disconnected” Announced if a connected phone/
device is turned o, goes out of
range or has BT disabled while in
range and while the speakerphone
is still turned on.
”Battery level is low” Announced when the battery level
goes below 10%
”Call from <name from
phone address book or
number>”*
Announced when there is an
incoming call if your phone/device
supports caller ID (PBAP)
AddItIonAL FeAtURes
Play music, podcasts and GPS Announcement*
If your phone or device supports A2DP audio streaming you can
hear your music or any other audio through your Jabra SUPREME.
Simply start playing your music or start your application and the
audio will automatically transfer to SUPREME. If your phone rings
the audio will mute and you can answer or ignore the call. The
audio will resume after the call.*
Using you Jabra SUPREME with two mobile devices at the
same time
The Jabra SUPREME supports Advanced MultiUse™ and is capable
of having two mobile phones (or other Bluetooth® devices)
connected at the same time. This will give you the freedom of
having only one headset to operate both of you mobile phones/
devices.
When you have two active phones/devices connected you will
hear ”Two devices connected”. In this state the phone paired last
will be used for voice dialing. When two phones are connected
you can place and answer calls on both and switch between
the two. If you are on a call and receive a second call you will be
alerted by a tone. You can then:
- Put the rst call on hold and accept the incoming call by
pressing the Answer/end button
- Switch between the two active calls by pressing the Answer/
end button again
- Tap the Answer/end button once to end the first call and
accept the new incoming call

13
english
JABRA SUPREME
* Phone dependent
QUICK REFERENCE TABLE FOR MANUALLY CONTROLLING YOUR
JABRA SUPREME
Function Action
Entering pairing
mode
Flipping boom arm to On position
Cancel pairing mode Tap the Answer/end button
Answer call Tap the Answer/end button
End a call Tap the Answer/end button
Reject a call Double tap the Answer/end button to
reject an incoming call
Initiate phone voice
dial*
Press the Answer/end button when
connected or not on an active call or
tap the Voice button and say“Phone
commands” to activate the voice
dialing feature on your phone.*
Enable or disable
Voice Guidance and
commands
Press and hold the Voice button while
ipping the boom arm to On position.
You will hear ”Power on” when
you enable and a tone when you
disable the voice features.
Reset to factory
default
Turn on the SUPREME and press
and hold the Answer/end, VOL+
button together for about 6 seconds.
When the SUPREME is reset it will
automatically go into pairing mode.
Download Firmware updates and additional languages
Go to jabra.com/SUPREME and download the latest rmware and
additional languages.

14
english
JABRA SUPREME
* Phone dependent
tRoUBLesHootInG & FAQ
I hear crackling noises
- Bluetooth is a radio technology, which means it is sensitive to
objects between the headset and the connected device. It is
designed for the headset and the connected device to be used
within 33 feet (10 meters) of each other, with no major objects
in the way (walls, etc.).
I cannot hear anything in my headset
- Increase the volume in the headset.
-
Ensure that the headset is paired to a device that is playing.
- Make sure your phone is connected to the headset by tapping
the Answer/End button.
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone/device. Follow the pairing instruction to pair it
again.
I want to reset the pairing list in my headset
- The headset registers a list of up to 7 mobile phones. To
clear the pairing list and reset the Jabra SUPREME to factory
settings you can turn the SUPREME on while pressing the
VOL+ and Answer/end button for about 6 seconds. The next
time you power on the Jabra SUPREME it will automatically go
into pairing mode.
Will the Jabra SUPREME work with other Bluetooth
equipment?
- The Jabra SUPREME is designed to work with Bluetooth mobile
phones. It can also work with other Bluetooth devices that are
compliant with Bluetooth version 1.1 or higher and support a
headset, hands-free and/or advance audio distribution profile.
I cannot use Reject call, call on hold, Redial or voice dialing
- These features are dependent on the ability of your phone to
support a hands-free profile. Even if the handsfree profile is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices. Please consult
your device manual for details.

15
english
JABRA SUPREME
Please note that some features can only be operated from the
primary device e.g. voice dial using Jabra SUPREME with 2 mobile
phones.
My Jabra SUPREME does not announce the caller names
during incoming calls
- Ensure that your phone supports the Bluetooth® phonebook
access prole (PBAP) and that the name of the caller is in you
phonebook.
Please note that on some Android phones a warning message
about the phonebook transfer appears in the top left corner. You
must select this message and agree to the connection in order to
get caller ID to function properly.
need MoRe HeLP?
1. Web: www.jabra.com
(for the latest support info and online User Manuals)
2. E-mail:
Deutsch [email protected]
English [email protected]
Español [email protected]
Français [email protected]
Italiano suppor[email protected]
Nederlands [email protected]
Polska suppor[email protected]
Scandinavian suppor[email protected]
 [email protected]
Australia suppor[email protected]
China [email protected]
Japan [email protected]
New Zealand suppor[email protected]
Singapore suppor[email protected]

16
english
JABRA SUPREME
3. Phone:
Belgique/Belgie 00800 722 52272
Danmark 70 25 22 72
Deutschland 0800 1826756
Die Schweiz 00800 722 52272
España 900 984572
France 0800 900325
Italia 800 786532
Luxembourg 00800 722 52272
Nederland 0800 0223039
Norge 800 61272
Österreich 00800 722 52272
Polska 0801 800 550
Portugal 00800 722 52272
Suomi 00800 722 52272
Sverige 020792522
United Kingdom 0800 0327026
 [phone]
International 00800 722 52272
Australia 1-800-738-521
China 800-858-0789
Japan 03-3242-8722
New Zealand [phone]
Singapore 800 1012329
4. NA Support:
Email: t[email protected]
Twitter: twitter.com/jabra_US
http://www.jabra.com/mobilesupport
(For the latest support info and online user manuals)
U.S 1 [phone]
Canada 1 [phone]

17
english
JABRA SUPREME
Dispose of the product according
to local standards and regulations.
www.jabra.com/weee
tAKInG CARe oF YoUR HeAdset
- Always store the Jabra SUPREME with the power o and safely
protected.
- Avoid storage at extreme temperatures (above 45°C/113°F –
including direct sunlight – or below -10°C/14°F). This can shorten
battery life and may aect operation. High temperatures may
also degrade performance.
- Do not expose the Jabra SUPREME to rain or other liquids.
GLossARY
1 Bluetooth is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords over
a short distance (approx. 10 meters/33 feet). Bluetooth is safe
to use. It is secure too, so once a connection has been made
no-one can listen in and there is no interference from other
Bluetooth devices either. Get more information at
www.bluetooth.com.
2 Bluetooth proles are the dierent ways that Bluetooth devices
communicate with other devices. Bluetooth phones support
the headset prole, the hands-free prole or both. In order to
support a certain prole, a phone manufacturer must implement
certain mandatory features within the phone’s software.
3 Pairing creates a unique and encrypted link between two
Bluetooth devices and lets them communicate with each other.
Bluetooth devices will not work if the devices have not been
paired.
4 Passkey or PIN is a code that you enter on your Bluetooth
enabled device (e.g. a mobile phone) to pair it with your Jabra
SUPREME. This makes your device and the Jabra SUPREME
recognize each other and automatically work together.
5 Standby mode is when the Jabra SUPREME is passively waiting
for a call. When you‘end’a call on your mobile phone, the
headset goes into standby mode.

© 2011 GN Netcom US, Inc. All rights reserved. Jabra®is a registered
trademark of GN Netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth®word
mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by GN Netcom A/S is under license. (Design and
specifications subject to change without notice).
© 2011 GN Netcom A/S. All rights reserved. Jabra®is a registered
trademark of GN Netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth®word
mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by GN Netcom A/S is under license. (Design and
specifications subject to change without notice).
MADE IN CHINA
www.jabra.com
REV D