Jackery SolarSaga 300 User manual

Modell: JS-300A
USER GUIDE
SolarSaga 300
Image is for reference only
Jackery-UM-001

* Do not flex or bend the folding solar panels.
* Do not place folding solar panels in shading places, while tree shades, buildings, and
any other obstructions should be minimized.
* Do not soak the solar panels in water or other liquid.
* Do not clean the solar panel with water, please gently wipe it with a damp cloth.
* Do not use or store solar panels near open flames or flammable materials.
* Do not scratch the surface of solar panels with sharp objects.
* Prevent corrosive substances to damage solar panels.
* Do not step on or place heavy objects on the solar panels.
* Do not disassemble the solar panels.
* The output circuit of the solar panels must be correctly connected to the equipment.
Please do not short-circuit the positive and negative poles. Ensure that there is no gap
between the connector and the insulated connector. If there is a gap, sparks or electrical
shocks will occur.
* Check the connection status of each component, including cables, wires and plugs.
24 - month limited warranty
Lifetime technical support
[e-mail]
1-888-502-2236丨Mon-Fri 9:00-6:00 PST (US)
SAFETY TIPS
CUSTOMER SERVICE
GB Model: JS-300A
English
TECHNICAL PARAMETERS
Product Name
Model
Peak Power
Power Voltage
Power Current
Open Circuit Voltage
Short Circuit Current
Operating Temperature Range
Dimensions (unfolded)
Dimensions (folded)
Product Weight
SolarSaga 300
JS-300A
300W±10W
30.78V±5% DC
9.7±5%A
36.2V±5% DC
11.1A±5%
-10-65℃(14-149℉)
2585x878x25mm
660x878x40mm
13±0.5kg

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void
the user’s authority to operate the device."
GB
FREQUENTLY ASKED QUESTIONS
The product is covered by a limited warranty from Jackery for the original purchaser that covers the product
from defects in workmanship and materials for 24 months from the date of purchase ( damages from normal
wear and tear, alteration, misuse, neglect, accident, service by anyone
other than authorized service center, or act of God are not included).
During the warranty period and upon verification of defects, this product will be replaced when returned with
proper proof of purchase.
WARRANTY
Q: What kind of battery can be charged by these solar modules?
1, Jackery Explorer series
2, Sealed lead-acid battery
3, Colloidal lead-acid batteries
4, The open lead-acid batteries
Q: How to clean the solar surface?
Dust and dirt on the surface should first be removed using a soft brush. Use a damp cloth to wipe the
surface of the solar module to remove any remaining dust or dirt. Any guano or other adhesive
should be removed as soon as possible from the solar surface to avoid a reduction in performance.
Q: Are the foldable solar modules waterproof?
To Maximize the lifespan of the module, it should not get wet.
CONTACT US
For any inquiries or comments concerning our products, please send an email to [e-mail], and we
will respond to you as soon aspossible. If there is any quality related issue with the product, you may request
a replacement or refund by submitting a request form at www.jackery.com/support/.

TM and 2019 Jackery Inc. All rights reserved.
Made in China www.jackery.com
Jackery Inc.