Jacuzzi Duetta 6642 User manual

Duetta™ 6642
PURE AIR®BATH
MODEL NUMBER:
GA00 (Right-hand)
EXTERIOR DIMENSIONS:
66" long x 42" wide x
26"high
OPERATING GALLONS:
64-95 gallons
Looking for a Jacuzzi®bath for two? Consider the Duetta™ Pure Air®Bath,
a lush, oval air bath designed for discerning bathers.
FEATURES:
• Excusive 360° Balanced Airow™ system
• Flexible drop-in or undermount installation options
• 800-watt variable-speed heated-air blower
• Bottom air channels for maximum massage
• Low-prole deck
• Wave Pulse™ system
• PrO3
™ Cleansing System standard
Duetta™ 6642 |PURE AIR®BATH

Duetta™6642
PURE AIR® BATH
Technical Specifications
DIMENSIONS
66” L x 42” W x 26” H
(1676 mm) L x (1067 mm) W x (660 mm) H
DRAIN/OVERFLOW
A: 18.4” (467 mm) B: 11” (279 mm)
CUTOUT
Template Provided Part Number: DA07000
TOTAL WEIGHT
1106 lbs (502 kg) / 57.5 lb/sq. ft. (281 kg/m2)
OPERATING GALLONAGE
Min. 64 U. S. Gal. (200 liters)
Max. 95 U.S. Gal. (360 liters)
PRODUCT WEIGHT
117 lbs (53 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS
Requires a dedicated GFCI protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
HEATER (STANDARD)
No water heater is available on this unit. Blower has integral air heater.
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#GD79000 01/08
GA00 Duetta™ 6642 Pure Air® Bath, Right Hand
• Center Drain Location
• Accessories / Hardware:
Sch 40, Rotary Drain Kit: #DA34
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Product Shown: Duetta™ 6642 Pure Air® Bath
Right Hand Model: GA00
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
11.04"
66"
42"
33
"
3.84"
13" x 4" 2"
12" H x 24" L Service Access
Blower
END VIEW
H
W
SIDE VIEW
L
1/2"
(13 mm)
(Blower)
DRAIN/OVERFLOW
A
B