Jasco 28172 User manual

Plug-in
Wirelessly control and schedule
lights from anywhere
Smart Switch
Z-Wave Plug-In Dual
Outlet Smart Switch,
White
SKU#: 28172
Features
• Dual outlets – Dual-outlet smart dimmer features two grounded Z-Wave-controlled
outlets allowing remote operation of two devices at the same time (cannot be controlled
individually).
• Hassle-free operation – Control the device remotely with your smartphone and voice
commands when connected to a compatible hub or enjoy manual ON/OFF operation from
the switch. Home automation is simple through custom scenes, versatile scheduling and
convenient alerts.
• Easy installation – No wiring required. Simply plug in the device and connect to your hub
for dimming capabilities. Works with all LED, CFL, incandescent and halogen bulbs as well
as other devices. Operating temperature range 32-104 degrees Fahrenheit.
• Full-home coverage – Z-Wave Plus works with all previous Z-Wave generations to allow
continued expansion of your smart-home network. The dimmer is capable of controlling
indoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub
or other devices to extend your range by up to 150ft.
Wirelessly schedule and control two lamps or
small appliances separately or together from
anywhere, at any time with any mobile device -
space-saving design does not block second outlet
or obstruct furniture placement.
28172 PRODUCT OVERVIEW

1
PRODUCT OVERVIEW
ULTIMATE FLEXIBILITY
Dim and control your lights, small fans and other appliances,
schedule a timed event, create a custom scene from
anywhere in the world, at any time of the day, and charge
your mobile devices from your smartphones, tablets, PCs and
Z-Wave enabled remotes
TWO GROUNDED OUTLETS & MANUAL
ON/OFF BUTTON
Smart Dimmer Plug features two (2) grounded outlets that
are controlled together (not individually controlled).
Manual ON/OFF physical button is located on the top of the
plug in module.
WORKS WITH APPLIANCES AND LIGHTING
Smart Plug is ideal for lamps and small appliances such as
fans, heaters, coffee makers, etc. Ideal for living rooms and
bedrooms. Compatible with CFL, LED, incandescent, halogen
lighting and other small devices like fans and lamps
SPACE-SAVING DESIGN
When plugged in to the top outlet of your standard wall
outlet this smart plug will not block access to the bottom
outlet. Outlets are located on the left and right side of the
plug-in allowing for ease of use behind furniture like tables,
couches, and beds.
28172

2
PRODUCT SPECIFICATIONS28172
Power:120VAC, 60Hz Signal Frequency: 908.4/916
Maximum load for the Z-Wave controlled outlets:
Maximum load for theZ-Wave controlledoutlet: 600W (5A)
Incandescent / 1/2 HP Motor or 1800W (15A)Resistive
Z-Wave controlled outlet is fused @ 5A. Thisfuseis not
user serviceable
Range:Up to 150 feet from controller or closest Z-Wave device
Operating Temperature: 32-104° F (0-40° C)
Warranty:2-year limited product warranty
For Indoor Use Only
Z-Wave Plug-In Dual
Outlet Smart Switch
Design Features
· Turn the connected device
On/Off manuallyvia
Z-Wave remote control
·Remotely monitor with any
mobile device*
· Can be Included in multiple
Groups and Scenes
· One Z-wave controlled
AC outlet
· One outlet is Z-Wave controlled,
the other is a pass through
·Remote ON/OFF control
via the Z-Wavecontroller
· Manual ON/OFF control
withthe top push-button
·Does not blockthe lower
outlet whenplugged in to
the upper outlet of a duplex
wall receptacle. (This assumes
that the duplex receptacle is
mounted with the ground
pin down.)
·Plugs and cords for
connecteddevices route
to the side allowingclose
placement of furniture
·Utilizes the Z-Wave Firmware
Update Meta Data command
updates Over theAir
· Two Toned coloring
· Visit http://www.ezzwave.com/
hubs/for hub compatibility
· Trilingual Instruction manual –
(English, French, Spanish)
Z-Wave Plus Features
·Works with Z-Wave Classic
and Z-Wave Plus Products
·50% more wireless range
·250% faster processor
·400% more memory
·Supports wireless upgrades
to future-proof your home
* Requires Z-Wave hub or controller,
functions may vary depending on brand.

3
PRODUCT SPECIFICATIONS28172
Two-Outlet Smart Switch
Wirelessly control bothoutlets simultaneously Adding your device to a Z-Wave network
Once the hub is ready to add your smart switch, press and
release the top button on the smart switch to add it in
the network.
To remove and reset the device
Once the controller is ready to remove your device, press and
release the top button on the smart switch to remove it from
the network.
To return to factory defaults
If pluggedin, unplug from the receptacle.Press and hold the
top button for at least 3 seconds while you plug the switch into
the receptacle.
subject to change without notice
Distributed by Jasco Products Company LLC
10 E. Memorial Rd., Oklahoma City, OK
©Jasco 2018
Grounded outlet

4
28172 QUICKSTART GUIDE
DA
BC

QUICKSTART GUIDE
5
28172
1. Cómo familiarizarse con su nuevo dispositivo Z-Wave
No debe superar los 600watts (5A) (para dispositivos incandescentes); 1800 W (15 A) de carga
resistiva o un motor de ½ caballo de fuerza. La capacidad total de carga de ambos tomacorriente
es de 1800 W (15 A).
• Un tomacorriente de CA controlado por Z-Wave para dispositivos de iluminación
incandescente estándar, lámparas CFL/LED, ventiladores o electrodomésticos pequeños
• Control remoto de ENCENDIDO/APAGADO a través del controlador Z-Wave
• Control manual de ENCENDIDO/APAGADO con el botón del panel frontal
• Un tomacorriente de CA puente siempre encendido
• Diseñado para aprovechar el espacio
• No obstaculiza el tomacorriente inferior al enchufarlo al tomacorriente superior de un
receptáculo dúplex de pared (supone que el receptáculo dúplex está instalado con la pata de
conexión a tierra hacia abajo)
• Los enchufes y cables de los equipos conectados se orientan hacia los laterales posibilitando la
instalación de los muebles cerca de ellos
• Conexión de energía a tierra de 3 conductores por seguridad
• Este dispositivo Z-Wave cuenta con características avanzadas que le permiten personalizar su
experiencia. Estas características solo pueden ser ajustadas por uncontrolador habilitado por
-consulte
DA
B C
DA
B C