JB Systems CHALLENGER BSW User manual

ENGLISH
USER MANUAL
JB SYSTEMS®
1/19
CHALLENGER BSW
OPERATION MANUAL
Thank you for buying this JB Systems®product. To take full advantage of all possibilities and for your own
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
•3in1 LED Moving Head –Beam/Spot/Wash
•Ideal for rental companies, DJ’s, stage,…
•Based on a 150W high power LED
•Focus controlled by DMX
•Zoom controlled by DMX
•3 facet rotating prism
•0-100% dimming and different strobe effects
•Separate gobo wheel with 7 fixed gobos + open
•Separate gobo wheel with 6 rotating gobo’s + open
•Excellent built-in programs for wonderful, ever changing, light shows.
•Multiple working modes:
•DMX-control: via 5, 17 or 20 channels
•Standalone: sound activated with internal mic
•Master/slave:
•Wonderful synchronized shows in standalone mode
•Innovative 5CH SMART-DMX
•Prepared for wireless DMX: just plug-in an optional WTR-DMX DONGLE ! (Briteq®order code: B04645)
•Color LCD-display for easy menu navigation
•3p and 5p XLR connectors for DMX in- and output.
BEFORE USE
•Before you start using this unit, please check if there’s no transportation damage. Should there be any, do
not use the device and consult your dealer first.
•Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
•Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
•[CHALLENGER BSW] unit
•2 Omega-brackets
•ProCon-power cable
•Operating instructions

ENGLISH
USER MANUAL
JB SYSTEMS®
2/19
CHALLENGER BSW
SAFETY INSTRUCTIONS:
•To protect the environment, please try to recycle the packing material as much as possible.
•To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
•To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
•This unit is for indoor use only.
•Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign
object enters the unit, immediately disconnect the mains power.
•Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture
must be fixed at least 50cm from surrounding walls.
•Don’t cover any ventilation openings as this may result in overheating.
•Prevent use in dusty environments and clean the unit regularly.
•Keep the unit away from children.
•Inexperienced persons should not operate this device.
•Maximum safe ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.
•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•Allow the device about 10 minutes to cool down before to start servicing.
•Always unplug the unit when it is not used for a longer time or before to start servicing.
•The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
•Check that the available voltage is not higher than the one stated on the unit.
•The power cord should always be in perfect condition. Switch the unit immediately off when the power cord
is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
•Never let the power-cord come into contact with other cables!
•This fixture must be earthed in order to comply with safety regulations.
•Don’t connect the unit to any dimmer pack.
•Always use an appropriate and certified safety cable when installing the unit.
•In order to prevent electric shock, do not open the cover. There are no user serviceable parts inside.
•Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same
type and electrical specifications!
•In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
•The housing and the lenses must be replaced if they are visibly damaged.
•Please use the original packing when the device is to be transported.
•Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering
from epilepsy.
CAUTION: To reduce the risk of electric shock, do not remove
the top cover. No user-serviceable parts inside. Refer servicing
to qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
this appliance.
This symbol means: indoor use only
This symbol means: Read instructions
CAUTION: Do not stare at operating lamp.
May be harmful to the eyes.

ENGLISH
USER MANUAL
JB SYSTEMS®
3/19
CHALLENGER BSW
OVERHEAD RIGGING
•Important: The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•Locate the fixture in a well ventilated spot, far away from any
flammable materials and/or liquids. The fixture must be fixed at
least 50cm from surrounding walls.
•The device should be installed out of reach of people and outside
areas where persons may walk by or be seated.
•Before rigging make sure that the installation area can hold a
minimum point load of 10times the device’s weight.
•Always use a certified safety cable that can hold 12 times the
weight of the device when installing the unit. This secondary
safety attachment should be installed in a way that no part of the
installation can drop more than 20cm if the main attachment fails.
•The device should be well fixed; a free-swinging mounting is
dangerous and may not be considered!
•Don’t cover any ventilation openings as this may result in
overheating.
•The operator has to make sure that the safety-relating and
machine-technical installations are approved by an expert before
using them for the first time. The installations should be inspected
every year by a skilled person to be sure that safety is still
optimal.
HOW TO SET UP THE UNIT
FRONT + BACK PANEL:
1. Indicator LEDs [MASTER-SLAVE-DMX-SOUND]
2. [DISPLAY]: shows the information on the different modes and functions.
3. Microphone for sound mode.
4. DISPLAY MODE BUTTONS:
•[▼] button : press this button to go down in the menu
•[▲] button : press this button to go up in the menu
•[ENTER]: press this button to confirm the selected function in the menu
•[MENU]: press this button to go back to the main menu or to leave submenus.
5. [DMX OUT]: 3p and 5p XLR Female connector to connect other projectors or use in Master/slave mode.
6. [DMX IN]: 3p and 5p XLR Male connector receive DMX data from a console or use in Master/slave
mode.
7. [POWER OUT]: used to daisy chain the power to several other fixtures. Always pay attention to the
maximum load while adding fixtures! Special combi cables (power + DMX XLR-cables) are available: see
our website!

ENGLISH
USER MANUAL
JB SYSTEMS®
4/19
CHALLENGER BSW
8. M-DMX INPUT: Please note that this USB-connector is NOT used for updates or to connect the unit to a
PC! Instead this USB-connector makes it very easy to add wireless DMX to the unit! Just add the
(optional) WTR-DMX DONGLE from BRITEQ®and you will get wireless DMX! Moreover you will be able
to connect other DMX-controlled equipment to the DMX-output so you can share the wireless DMX
function with all connected units! No extra settings to be made in the setup menu, just follow the
procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ®. The separate
WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: B04645)
9. [POWER IN]: Connect the mains input cable here.
10. FUSE HOLDER
SETUP MENU:
•This is the list of all the functions in the machine.
•To select any of these functions, press the [MENU] button and use the [▲/▼] buttons to browse the menu.
•Select the desired function with the [ENTER] button.
•Use [▲/▼] buttons to change the mode or value.
•Once the required mode or value is selected, press the [ENTER] button to select.
Level 1
Level 2
Level 3
DMX Functions
DMX Address
001 - xxx
DMX Channel
5MSL
17CH
20CH
No DMX
Sound
Freeze
Blackout
View DMX Value
1. Pan
2. Pan Fine
3. Tilt
4. Tilt Fine
5. P/T Speed
6. Show Mode
7. P/T Macro
8. P/T Macro Speed
9. Color
10.Gobo1
11.Gobo2
12.RGobo2
13.Focus
14.Prism
15.Rprism
16.Zoom
17.Shutter
18.Dimmer
19.Dimmer Fine
20.Special Function
Show Settings
Show Chase
show 1
show 2
show 3

ENGLISH
USER MANUAL
JB SYSTEMS®
5/19
CHALLENGER BSW
show 4
Slave Mode
Slave1
Slave2
Sound Trigger
on
off
Sound Sense
000-100
Fixture Settings
Pan Inverse
No
Yes
Tilt Inverse
No
Yes
P/T Feedback
No
Yes
Dimmer Curve
Linear
Square
Inv SQ
S Curve
Dimmer Speed
Fast
Smooth
Show Focus
5m
10m
25m
Display Settings
Display Inverse
No
Yes
Backlight Switch
Off
On
Backlight Intensity
001-010
Temperature Unit
°C
°F
Fixture Test
Auto Test
Manual Test
1. Pan
2. Pan Fine
3. Tilt
4. Tilt Fine
5. P/T Speed
6. Show Mode
7. P/T Macro
8. P/T Macro Speed
9. Color
10.Gobo1
11.Gobo2
12.RGobo2
13.Focus
14.Prism
15.Rprism
16.Zoom

ENGLISH
USER MANUAL
JB SYSTEMS®
6/19
CHALLENGER BSW
17.Shutter
18.Dimmer
19.Dimmer Fine
20.Special Function
Fixture Information
Fixture use time
Firmware Version
A.V10 B.V10 C.V10
Reset
Pan/Tilt
No
Yes
Effect
No
Yes
All
No
Yes
Special Function
Factory Setting
No
Yes
Password
000-999
[DMX Functions > DMX Address]
Used to set the desired DMX-address.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the values can be changed
•Use ▲/▼ buttons to select the desired DMX512 address.
•Once the correct address shows on the display, press the [ENTER] button to confirm.
[DMX Functions > DMX Channel]
Used to set the desired channel mode.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the values can be changed
•Use ▲/▼ buttons to select the desired mode:
•5MSL mode: [PAN/TILT] are music controlled while the dimmer, strobe speed, gobos, colors &
[PAN/TILT] –speed can be set using only 5 DMX channels.
•17 CH mode: same as the 20CH mode but without Pan/Tilt/Dim Fine adjustment possibility.
•20 CH mode: Full DMX-control on all functions.
•Once the correct option shows on the display, press the [ENTER] button to confirm.
[DMX Functions > No DMX]
Used to set how the projector reacts when the DMX-signal disappears.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the values can be changed
•Use ▲/▼ buttons to select the desired mode:
•Sound: the projector starts working in audio mode.
•Freeze: output based on the last valid DMX-signal is kept on the projector.
•Blackout: output turns black while no DMX is detected.
•Once the correct option shows on the display, press the [ENTER] button to confirm.
Note: as soon as the input detects a DMX-signal, blackout, freeze or audio mode will be cancelled.
[DMX Functions > View DMX Value]
Shows the value of each function of the fixture on every moment. Used for problem solving.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.

ENGLISH
USER MANUAL
JB SYSTEMS®
7/19
CHALLENGER BSW
[Show Settings > Show Chase]
Used to select the installation position of the projector while used in standalone mode.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button to select the desired show mode.
•[show 1]
•[show 2]
•[show 3]
•[show 4]
•Once the right mode is shown on the display, press the [ENTER] button to confirm.
[Show Settings > Slave Mode]
•Used to make the slave unit work in opposite to the master or to work in complete sync.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the values can be changed
•Use ▲/▼ buttons to select the desired mode:
•Slave 1: the slave operates in complete sync with the master.
•Slave 2: the slave operates in the opposite mode as compared with the master.
•Once the correct option shows on the display, press the [ENTER] button to confirm.
[Show Settings > Sound Trigger]
•Used to make the unit work in audio mode .
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the values can be changed
•Use ▲/▼ buttons to select the desired mode:
[Show Settings > Sound Sense]
•Used to adjust the sensitivity of the build in microphone .
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the values can be changed
•Use the ▼/▲ buttons to choose a value between “000” (very low sensitivity) and “100” (high sensitivity).
•Press the [ENTER] button to confirm the desired sensitivity.
[Fixture Settings > Pan Inverse]
Used to select if the PAN movements are inverted or not.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the values can be changed
•Use ▲/▼ buttons to toggle between [No] and [Yes].
•Press the [ENTER] button to confirm.
[Fixture Settings > Tilt Inverse]
Used to select if the TILT movements are inverted or not.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the values can be changed
•Use ▲/▼ buttons to toggle between [No] and [Yes].
•Press the [ENTER] button to confirm.
[Fixture Settings > P/T Feedback]
•This function corrects the PAN/TILT positions automatically if someone bumps onto the machine.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the values can be changed

ENGLISH
USER MANUAL
JB SYSTEMS®
8/19
CHALLENGER BSW
•Use ▲/▼ buttons to toggle between [No] and [Yes].
•Press the [ENTER] button to confirm.
[Fixture Settings > Dimmer Curve]
Used to set the dimmer curve of the master dimmer.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the values can be changed
•Use ▲/▼ buttons to selected the desired curve:
•Once you have the desired curve, press the [ENTER] button to save it.
[Fixture Settings > Dimmer Speed]
Used to set the dimmer speed of the master dimmer.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the speed can be changed to [Fast] or [Smooth].
•Use ▲/▼ buttons to selected the desired dimming speed.
•Press the [ENTER] button to confirm.
[Fixture Settings > Show Focus]
Used to set the focus for a fixed distance. (works only in Show Mode)
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: you can select 5m, 10 or 25m distance.
•Use ▲/▼ buttons to selected the desired dimming speed.
•Press the [ENTER] button to confirm.
[Display Settings > Display Inverse]
Used to turn the display over 180°. [Yes] = display is upsidedown.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the display can be turned by selecting [Yes] or [No].
•Use ▲/▼ buttons to select the desired display position.
•Press the [ENTER] button to confirm.
[Display Settings > Backlight Switch]
Used to adjust whether the display stays lit or not after the last time it was used.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the Backlight Switch can be turned [On] or [Off].
•Use ▲/▼ buttons to select [On] (display backlight will turn off after 30s) or [Off] (display stays lit).
•Press the [ENTER] button to confirm.
[Display Settings > Backlight Intensity]
Used to set the brightness of the backlight.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the brightness of the backlight can be set from 000 to 010.
•Use ▲/▼ buttons to select the desired value.
•Press the [ENTER] button to confirm.

ENGLISH
USER MANUAL
JB SYSTEMS®
9/19
CHALLENGER BSW
[Display Settings > Temperature Unit]
Used to set the temperature measurement in °C or °F.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the temperature can be set in °C or °F.
•Use ▲/▼ buttons to select the desired temperature measurement.
•Press the [ENTER] button to confirm.
[Fixture Test > Auto Test]
Used to start the automatic test function: all functions will be tested.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the projector starts an automatic AUTOTEST program until you stop it.
•Press the [MENU] button to stop the program.
[Fixture Test > Manual Test]
Used to test all functions one by one manually.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button. A list with all the functions will appear.
•Press the ▲/▼ buttons to select the function you want to test.
•Press the [ENTER] button to confirm.
•Press the ▲/▼ buttons to change the value for testing.
•Press the [MENU] button to stop the program.
[Fixture Information > Fixture use time]
Used to show the number of hours the fixture has been used.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the display will show the used time.
•Press the [MENU] button to stop the program.
[Fixture Information > Firmware Version]
Shows the current firmware version in the projector.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the display shows the firmware versions of the different processors in the
projector: A-Vxx, B-Vxx, C-3xx
Note: The firmware of this unit can be upgraded using the [Firmware Updater] (order code : B04319) from
Briteq with Windows®software.
[Reset > Pan/Tilt]
Used to reset the Pan and Tilt functions of the projector.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the display shows [Pan/Tilt]
•Press the [ENTER] button again to start resetting [Pan/Tilt] functions.
[Reset > Effect]
Used to reset the effect functions of the projector.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the display shows [Effect]
•Press the [ENTER] button again to start resetting the effect functions.

ENGLISH
USER MANUAL
JB SYSTEMS®
10/19
CHALLENGER BSW
[Reset > All]
Used to reset all the functions of the projector.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the display shows [ALL]
•Press the [ENTER] button again to start resetting ALL functions.
[Special Function > Factory Setting]
Used to reset the functions of the projector to the factory settings.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the display shows [Special Function>Factory Setting].
•Press the [ENTER] button again to select [No] or [Yes].
[Special Function > Password]
Used to reset the effect functions of the projector.
•Press the [MENU] button to access the different functions in the menu.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button: the display shows [Special Function>Password]
•Press the [ENTER] button to set a password (from 000 to 999).
MOTOR OFFSET MENU
This is a hidden menu where you can fine-tune the offset of several functions. To access this menu do as
follows: press the [ENTER] button for about 2 seconds while you are in the [MAIN Menu] (any option, not
important). Now the [Motor Offset] menu shows up:
The home position from the following functions can be adjusted (between -128 and 127) :
- [Pan]
- [Tilt]
- [Color]
- [Gobo2]
- [RGobo2]
- [Gobo1]
- [Prism]
- [RPrism]
- [Focus]
- [Zoom]
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button to select the desired function to adjust.
•Press the ▲/▼ buttons until the desired function is showing on the display.
•Press the [ENTER] button to confirm the value.
ELECTRICAL INSTALLATION + ADDRESSING
Important: The electrical installation should be carried out by qualified personal only,
according to the regulations for electrical and mechanical safety in your country.
Electrical installation for 1 standalone unit:
•Just insert the mains cable. The unit starts working immediately in stand-alone mode.
Electrical installation for two or more units in master/slave:
In this mode the units will show a synchronized show, working to the rhythm of the beat.

ENGLISH
USER MANUAL
JB SYSTEMS®
11/19
CHALLENGER BSW
•Connect 2 to maximum 16 units together using good quality balanced microphone cables. Put the first
unit in the chain in master mode (see Setup menu) and the other units as slaves (see Setup menu).
•Make sure that all units are connected to the mains.
•Done!
Electrical installation in DMX-mode:
•The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to
“daisy chain” your DMX controller and all the connected units with a good quality balanced cable.
•Both XLR-3pin and XLR-5pin connectors are used, however XLR-3pin is more popular because these
cables are compatible with balanced audio cables.
Pin layout XLR-3pin: Pin1 = GND ~ Pin2 = Negative signal (-) ~ Pin3 = Positive signal (+)
•To prevent strange behavior of the light effects, due to interferences, you must use a 90Ω to 120Ω
terminator at the end of the chain. Never use Y-splitter cables, this simply won’t
work!
•Make sure that all units are connected to the mains.
•Each light effect in the chain needs to have its proper starting address so it knows
which commands from the controller it has to decode. In the next section you will
learn how to set the DMX addresses.
HOW TO SET THE RIGHT STARTING ADDRESS:
Refer to the setup menu to learn how to set the starting address on this unit. The starting address of each
unit is very important. Unfortunately it is impossible to tell you in this user manual which starting addresses
you have to set because this completely depends on the controller you will use, the number of fixtures and
their number of DMX channel they use.
DMX-CONFIGURATION OF THE [CHALLENGER BSW] IN 5, 17 AND 20CH MODE:
5 CHANNEL MODE :
DMX
Channel
DMX-value
function
remarks
1
000-255
Dimmer (0 - 100%)
2
000-007
Open
008-037
Random strobe
038-067
Sound strobe
068-255
Strobe
Strobe (slow -> fast)
3
000-007
White
008-037
Red
038-067
Orange
068-097
Yellow
098-127
Green
128-157
Blue (dark)
158-187
Magenta
188-217
Cyan
218-247
Pink
248-255
Original colors
4
000-007
No gobo

ENGLISH
USER MANUAL
JB SYSTEMS®
12/19
CHALLENGER BSW
008-037
Gobo 1
038-067
Gobo 2
068-097
Gobo 3
098-127
Gobo 4
128-157
Gobo 5
158-187
Gobo 6
188-217
Gobo 7
218-247
Gobo 8
248-255
Original gobos
5
000-007
HOLD (Freeze)
008-255
Pan/Tilt sound control
17 CHANNEL MODE :
DMX
Channel
DMX-value
function
remarks
1
000-255
Pan
2
000-255
Tilt
3
000-255
Pan/Tilt Speed
Fast -> slow
4
000-015
No function
016-063
Show 1
064-127
Show 2
128-191
Show 3
192-255
Show 4
5
000-007
No function
PAN/TILT Macro's
008-015
Macro 1
016-023
Macro 2
024-031
Macro 3
032-039
Macro 4
040-047
Macro 5
048-055
Macro 6
056-063
Macro 7
064-071
Macro 8
072-079
Macro 9
080-087
Macro 10
088-095
Macro 11
096-103
Macro 12
104-111
Macro 13
112-119
Macro 14
120-127
Macro 15
128-135
Macro 16
136-143
Macro 17
144-151
Macro 18
152-159
Macro 19
160-167
Macro 20
168-175
Macro 21

ENGLISH
USER MANUAL
JB SYSTEMS®
13/19
CHALLENGER BSW
176-183
Macro 22
184-191
Macro 23
192-199
Macro 24
200-207
Macro 25
208-215
Macro 26
216-223
Macro 27
224-231
Macro 28
232-239
Macro 29
240-247
Macro 30
248-255
Macro 31
6
000-255
Speed Pan/Tilt Macro
Fast -> slow
7
000-015
White
016-018
Red/White
019-021
Red
022-024
Orange/Red
025-027
Orange
028-030
Yellow/Orange
031-033
Yellow
034-036
Green/Yellow
037-039
Green
040-042
Blue (Dark)/Green
043-045
Blue (Dark)
046-048
Magenta/Blue (Dark)
049-051
Magenta
052-054
Blue (Light)/Magenta
055-057
Blue (Light)
058-060
Pink/Blue (Light)
061-063
Pink
064-127
Positioning colors
Step by step
128-189
Rainbow effect
CCW (Fast->slow)
190-193
Stop
194-255
Rainbow effect
CW (Slow->fast)
8
000-007
Open
Fixed gobos
008-015
Gobo 1
Very narrow beam
016-023
Gobo 2
Narrow beam
024-031
Gobo 3
Medium beam
032-039
Gobo 4
Large beam
040-047
Gobo 5
Wide beam
048-055
Gobo 6
056-062
Gobo 7
063-127
Gobo 1-7 shaking
128-190
Gobo wheel rotation
CCW (Fast->slow)
191-192
Stop
193-255
Gobo wheel rotation
CW (Slow->fast)
9
000-008
Open
Rotating gobos

ENGLISH
USER MANUAL
JB SYSTEMS®
14/19
CHALLENGER BSW
009-017
Gobo 1
018-026
Gobo 2
027-035
Gobo3
036-044
Gobo 4
045-053
Gobo 5
054-063
Gobo 6
064-127
Gobo 1-6 shaking
128-190
CCW (Fast->slow)
191-192
Stop
193-255
CW (Slow->fast)
10
000-127
Gobo rotation
Step by step
128-190
CW (Fast->slow)
191-192
Stop
193-255
CCW (Slow->fast)
11
000-063
Beam
064
Medium spot
065-127
Spot
128-255
Wash
12
000-009
No function
010-255
Prism
13
000-127
Prism rotating
Step by step
128-190
CCW (Fast->slow)
191-192
Stop
193-255
CW (Slow->fast)
14
000-255
Focus
15
000-007
Shutter/strobe off
008-015
ON
016-131
Strobe
Slow->fast
132-139
Open
140-181
Open/close
Slow->fast
182-189
Open
190-231
Close/open
Slow->fast
232-239
Open
240-247
Random strobe
248-255
Open
16
000-255
Dimmer (0-100%)
17
000-069
No function
Special functions
070-079
Pan/Tilt
Blackout enabled
080-089
Pan/Tilt
Blackout disabled
090-099
Color changing
Blackout enabled
100-109
Color changing
Blackout disabled
110-119
Gobo changing
Blackout enabled
120-129
Gobo changing
Blackout disabled
130-139
No function
140-149
Pan/Tilt RESET

ENGLISH
USER MANUAL
JB SYSTEMS®
15/19
CHALLENGER BSW
150-159
Effect RESET
160-199
No function
200-209
RESET all functions
210-219
Pan/Tilt/Color/Gobo
Blackout enabled
220-229
Pan/Tilt/Color/Gobo
Blackout disabled
230-255
No function
20 CHANNEL MODE :
DMX
Channel
DMX-value
function
remarks
1
000-255
Pan
2
000-255
Pan fine
3
000-255
Tilt
4
000-255
Tilt fine
5
000-255
Pan/Tilt Speed
Fast -> slow
6
000-015
No function
016-063
Show 1
064-127
Show 2
128-191
Show 3
192-255
Show 4
7
000-007
No function
PAN/TILT Macro's
008-015
Macro 1
016-023
Macro 2
024-031
Macro 3
032-039
Macro 4
040-047
Macro 5
048-055
Macro 6
056-063
Macro 7
064-071
Macro 8
072-079
Macro 9
080-087
Macro 10
088-095
Macro 11
096-103
Macro 12
104-111
Macro 13
112-119
Macro 14
120-127
Macro 15
128-135
Macro 16
136-143
Macro 17
144-151
Macro 18
152-159
Macro 19
160-167
Macro 20
168-175
Macro 21
176-183
Macro 22
184-191
Macro 23
192-199
Macro 24

ENGLISH
USER MANUAL
JB SYSTEMS®
16/19
CHALLENGER BSW
200-207
Macro 25
208-215
Macro 26
216-223
Macro 27
224-231
Macro 28
232-239
Macro 29
240-247
Macro 30
248-255
Macro 31
8
000-255
Speed Pan/Tilt Macro
Fast -> slow
9
000-015
White
016-018
Red/White
019-021
Red
022-024
Orange/Red
025-027
Orange
028-030
Yellow/Orange
031-033
Yellow
034-036
Green/Yellow
037-039
Green
040-042
Blue (Dark)/Green
043-045
Blue (Dark)
046-048
Magenta/Blue (Dark)
049-051
Magenta
052-054
Blue (Light)/Magenta
055-057
Blue (Light)
058-060
Pink/Blue (Light)
061-063
Pink
064-127
Positioning colors
Step by step
128-189
Rainbow effect
CCW (Fast->slow)
190-193
Stop
194-255
Rainbow effect
CW (Slow->fast)
10
000-007
Open
Fixed gobos
008-015
Gobo 1
Very narrow beam
016-023
Gobo 2
Narrow beam
024-031
Gobo 3
Medium beam
032-039
Gobo 4
Large beam
040-047
Gobo 5
Wide beam
048-055
Gobo 6
056-062
Gobo 7
063-127
Gobo 1-7 shaking
128-190
Gobo wheel rotation
CCW (Fast->slow)
191-192
Stop
193-255
Gobo wheel rotation
CW (Slow->fast)
11
000-008
Open
Rotating gobos
009-017
Gobo 1
018-026
Gobo 2
027-035
Gobo3

ENGLISH
USER MANUAL
JB SYSTEMS®
17/19
CHALLENGER BSW
036-044
Gobo 4
045-053
Gobo 5
054-063
Gobo 6
064-127
Gobo 1-6 shaking
128-190
CCW (Fast->slow)
191-192
Stop
193-255
CW (Slow->fast)
12
000-127
Gobo rotation
Step by step
128-190
CW (Fast->slow)
191-192
Stop
193-255
CCW (Slow->fast)
13
000-063
Beam
64
Medium spot
065-127
Spot
128-255
Wash
14
000-009
No function
010-255
Prism
15
000-127
Prism rotating
Step by step
128-190
CCW (Fast->slow)
191-192
Stop
193-255
CW (Slow->fast)
16
000-255
Focus
17
000-007
Shutter/strobe off
008-015
ON
016-131
Strobe
Slow->fast
132-139
Open
140-181
Open/close
Slow->fast
182-189
Open
190-231
Close/open
Slow->fast
232-239
Open
240-247
Random strobe
248-255
Open
18
000-255
Dimmer (0-100%)
19
000-255
Dimmer fine
20
000-069
No function
Special functions
070-079
Pan/Tilt
Blackout enabled
080-089
Pan/Tilt
Blackout disabled
090-099
Color changing
Blackout enabled
100-109
Color changing
Blackout disabled
110-119
Gobo changing
Blackout enabled
120-129
Gobo changing
Blackout disabled
130-139
No function
140-149
Pan/Tilt RESET
150-159
Effect RESET
160-199
No function

ENGLISH
USER MANUAL
JB SYSTEMS®
18/19
CHALLENGER BSW
200-209
RESET all functions
210-219
Pan/Tilt/Color/Gobo
Blackout enabled
220-229
Pan/Tilt/Color/Gobo
Blackout disabled
230-255
No function
MAINTENANCE
•Make sure the area below the installation place is free from unwanted persons during servicing.
•Switch off the unit, unplug the mains cable and wait until the unit is cooled down.
During inspection the following points should be checked:
•All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
•Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
•When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
•The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
•In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
•The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
•The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics.
•Clean with a soft cloth using normal glass cleaning products.
•Always dry the parts carefully.
•Clean the external optics at least once every 30 days.
•Clean the internal optics at least every 90 days.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!