JBL GTO15T User manual

Automotive Tweeter Owner’s Manual GTO15T
GTO SERIES

Introduction
Thank you for choosing the JBL
GTO15T. These tweeters have been
designed to provide smooth high-
frequency reproduction, high power
handling and ease of installation.
Please read this manual thoroughly
before you begin your installation.
It includes information that will
make your installation as simple
and trouble-free as possible. Also,
don’t forget to send in your warranty
registration card, and keep your
sales receipt somewhere safe in
case you need warranty service.
About These Instructions
Installation of automotive stereo
components can require extensive
experience with a variety of mechan-
ical and electrical procedures.
Although these instructions explain
how to install GTO15T tweeters in a
general sense, they do not show the
exact installation methods for your
particular vehicle. If you feel you do
not have the experience, do not
attempt the installation yourself,
but instead ask your authorized JBL
car audio dealer about professional
installation options.
Loud Music and Hearing
Playing loud music in an automobile
can permanently damage your hear-
ing, as well as hinder your ability to
hear traffic. The maximum volume
levels achievable with JBL speakers,
combined with high power amplifica-
tion, may exceed safe levels for
extended listening. We recommend
using low volume levels when driving.
JBL accepts no liability for hearing
loss, bodily injury, or property dam-
age as a result of use or misuse of
this product.
About the Crossover
Passive-crossover design involves
precise circuit design and compo-
nent selection. Moreover, a well-
designed crossover circuit provides
an intended electrical response,
when combined with the electrical
properties of the speaker, to provide
a particular acoustic response.
Each enclosed crossover has been
optimized to provide a flat response
when used with a GTO15T tweeter.
Do not use another brand or type
of passive crossover, or connect
more than one tweeter to a
crossover. Doing so may damage
the tweeter.
About Placement
Figures 1 and 2 show possible
speaker placements with Figure 1
being more desirable. We recom-
mend using the kick panel for
mounting to obtain the best staging
and imaging in most vehicles.
Figure 1. Mounting the woofer and tweeter
in the kick panel.
Figure 2. Mounting the woofer in the door
and the tweeter in the kick panel.
02
Speaker Placement JBLGTO15T
TWEETER
and
WOOFER
on kick panel
TWEETER
on kick panel
WOOFER
in factory
door location
Installation Warnings and Tips JBLGTO15T

03
Tweeter Installation JBL GTO15T
1
2
3
Figure 4. Mounting the tweeter using the I-Mount™
(patent no. 5,859,917) flush-mounting kit. Also see
Figure 5.
Figure 5. Aiming the tweeter at a desired
listening position.
1
2
(–) SMALL LUG
(+) LARGE LUG
BLACK
RED
RED (+)
RED (+)
BLACK (–)
BLACK (–)
Figure 3. Surface-mounting the tweeter and
connecting the crossover.
1
SLIDE SCREW UP OR
DOWN TO ADJUST
TWEETER ANGLE.
4
SECURELY TIGHTEN
THE LARGE HAND NUT.
2
TIGHTEN NUT AND
WASHER TO LOCK
ANGLE SETTINGS.
3
ROTATE TO AIM
ANGLED TWEETER
TOWARD LISTENER.

JBL Consumer Products • 250 Crossways Park Drive, Woodbury, NY 11797 USA
1-800-336-4JBL (4525) www.jbl.com
©2000 JBL, Incorporated • JBL is a registered trademark of JBL, Incorporated
Made in USA Printed in USA 3/01 Part No. GTO15TOM3/01
Specifications JBLGTO15T
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
FRANCE
declare in own responsibility, that the product described in this owner’s manual is in
compliance with technical standards:
EN 50081-1:1992
EN 50082-1:1992
Lutz Uphoff
Harman Consumer International
Chateau-du-Loir, France. 3/01
General Care:
The loudspeaker grilles may be
cleaned with a damp cloth. Do not
use any cleaners or solvents on the
grilles or the speaker cones.
Type 1" component tweeter
Speaker Impedance 4 ohms
Power Handling: 50W RMS, 150W peak
(with enclosed crossover)
Sensitivity (2.83V, 1m) 91dB
Frequency Response 2.5kHz –21kHz