JBL UA Sport Wireless Flex User manual

FLEX
SPORT WIRELESS

1. OVERVIEW: CONTROLS AND FEATURES
Charge Connector
Flex
Zones
Play/Pause
Power/Pair
Multifunction Button:
RunSafe™LED
Mic Mute (in Calls)
Siri®/Google Now™
Volume/Track
Status Light

2. SELECT YOUR FIT
Choose between winged and wingless sport ex
t ear tips that are easy to switch out for maximum
security.
S(Pre-Installed) (Pre-Installed)
Sport Flex Fit Ear Tips: Enhancers:
Size 3 Size 5 M L
3.1 Gently clip the enhancer onto the earphone.
3. ATTACH ENHANCERS
3.2 Align the notch, and gently clip the ear tip onto
the earphone.

4. FIND THE RIGHT FIT FOR YOUR ACTIVITY
Always-ready neckband features
adjustable Flex Zones.
Bend the Flex Zones IN for a more
secure t during sport activities.
Loosen for all-day comfort.
NOTE: Bend IN only.
DO NOT bend OUT past original position.
3.3 Insert the earphones into your ear and twist
into place. Adjust for comfort.
3. ATTACH ENHANCERS

5. POWER + CHARGE
State
Charging battery
Low battery
Fully charged
LED
Behaviors
Status Light
Speed Charge
5 mins 1 hr
Full Charge
2 hrs 12 hrs
=3s

After rst time set up, your headphone will
automatically reconnect if your device is nearby with
Bluetooth ON.
To connect a new device, from O mode press and
hold Play/Pause button for three seconds.
The rst time you turn your headphone on, go to your
device’s Settings menu, then to the Bluetooth section,
and select “UA | JBL Flex” from the list.
To pair Bluetooth with the device
UA |JBL Flex
UA |JBL Flex
6. CONNECT TO YOUR DEVICE

7. BUTTON COMMANDS
7.1 MULTIFUNCTION BUTTON
Siri®/Google Now™:
Long press to start.
Press again to cancel or exit.
7.2 RUNSAFE™LED
Use the RunSafe LED outside after dark.
Press to enable.
Press repeatedly to cycle through
three dierent light modes.
RunSafe LED
x1

7. BUTTON COMMANDS
NOTE: During a call, the Multifunction button mutes your mic instead of
adjusting the RunSafe LED.
Press again to unmute.
7.4 VOLUME CONTROL
7.3 PHONE CONTROL
x 1
x 1
Play/Pause
7.5 MUSIC CONTROL
> 2
> 2

8. LED BEHAVIORS
State
Pairing mode
No device connected
Device connected
Low battery
Charging battery
LED
Behaviors
État
Mode d'association
Aucun appareil connecté
Appareil connecté
Batterie faible
Batterie en charge
Comportement
de la DEL
Estado
Modo de emparelhamento
Nenhum dispositivo ligado
Dispositivo ligado
Pouca bateria
A carregar a bateria
Comportamentos
LED
Estado
Modo emparejamiento
No hay ningún dispositivo conectado
Dispositivo conectado
Batería baja
Cargando batería
Comportamientos
del LED
Status
Pairing-Modus
Kein Gerät verbunden
Gerät verbunden
Batteriestand niedrig
Batterie wird geladen
LED-
Verhalten
x2
x2
x2
x2 x2