QUICKSTART GUIDE
BATTERY POWERED | ONE HAND CARRY | BLUETOOTH AUDIO | LEGENDARY JBL SOUND
2. CHARGE THE UNIT
1. Confirm the Power Switch (J) is in the
OFF position.
2. Connect the power cord to the Power
Receptacle on the rear of the speaker.
3. The Battery Level Meter (L) will
illuminate, indicating the unit is charging.
4. The unit is charged when the Battery
Level Meter (L) is fully illuminated when
powered on or of f.
1. LISTENING CONFIGURATIONS
Speaker Only 1 Spacer 2 Spacers
123
3. PLUG IN THE INPUTS
1. Turn the Channel Volume Controls (F)
and Master Volume Control (N) all the
way to the left before connecting any
inputs.
2. Connect your device(s) via the input jacks
provided.
3. If CH1 – CH4 inputs are being used,
select MIC or LINE via the Mic/Line
Button (E).
4. If connecting instruments directly to
inputs 3 – 4, engage the Hi-Z button (Q).
