Jeep Urban Rider User manual

Jeep®Urban Rider
Stroller
Instructions
by
by

2
WARNING
Please take a moment to read through these instructions
before you use your Jeep®Urban Rider Stroller.
Important Safety Information:
WARNING:
• Follow the manufacturer’s instructions.
• Put on all the brakes whenever you park the stroller.
• Do Not leave children unattended.
• Do Not carry extra children or bags on this stroller.
• Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
• Do Not use accessories other than those approved by manufacturer.
• To prevent choking hazard, remove and discard all packing material
before using this product.
• Always use restraint system to keep child from standing up or
falling out of the stroller. Use the harness at all times.
• Always balance the weight of the stroller evenly.
• Always lock the stroller before allowing your child in or near the
stroller.
• Only use this stroller with a child weighing less than 18kg .
• Never use this stroller on stairways or escalators.
• Do not allow children to stand on seat or sit on footrest.
• This is not an exercise stroller. Do not use product while running,
jogging or participating in other athletic activities.
• Do not put child in basket.
• Do not put more than 2kg in the basket.
The stroller should not be used near an open fire or exposed flame.
3

4
To open Stroller
1
2
3
Rear Wheels
PARTS LIST
HOW TO ASSEMBLE YOUR STROLLER
Stroller Front Wheels
Canopy
1. Release the lock clip on
the side of the stroller.
2. Push the front of the
stroller downward.
3. Press down the folding
bar to lock stroller.
Rear Wheels
Stroller
Canopy
Front Wheels
To Open Stroller

5
To Assemble Front Wheels
To Assemble Rear Wheels
1
1
1. Push the front wheels
onto the stroller leg until it
snaps into place.
Repeat for the other front
 wheel.Tugrmlyoneach
wheel assembly to be
sure the wheels are
securely in place.
1. Push the rear wheels onto
the rear leg tubes until
they click into place.
 Tugthewheelsrmlyto
make sure the wheels are
securely in place.
To Assemble Front Wheels
To Assemble Rear Wheels

6
Canopy Connector
Stay Tab
1
2
3
To Assemble Canopy
1. Align the canopy connector
between the stay tab and
the fabric. Snap canopy
connector onto the frame.
Repeat for the other side.
2. To lock canopy open,
push down on both sides
of the hinges as shown.
3. Secure the 2 sets of
velcro straps on both
sides of the stroller wings
as shown.
To Assemble Canopy

7
HOW TO USE YOUR NEW STROLLER
To Adjust Footrest Adjustable Knuckle Assembly
To Recline Seat
1
1
2
Side leavers
1. Press both buttons on
each side of the seat. Pull
up to raise the footrest.
Push down to lower the
footrest.
1. To recline the seat, press
both buttons on the side
leavers.
Push down to lower the
seat back.
2. To raise the seat, pull up
on the back of the seat.
To Adjust Footrest
To Recline Seat

8
To Operate Brakes
To Operate Swivel Front Wheel Lock
1
1
Levers
Unlock
Lock
1. Push both leavers down
to lock. Pull both levers
up to unlock.
1. Push the latches down on
the front wheels to unlock
and allow the wheels to
swivel.
2. Push latches up to lock
the wheels in the straight
forward position.
To Operate Brakes
To Operate Swivel Front Wheel Lock

9
To Secure Child in Stroller
To Adjust Stroller Strap Height
1
2
3
1Higher Position
Lower Position
1. Place child in stroller.
Hook the shoulder straps
to the waist belt.
2. To secure, snap each of
the waist belts into the
buckles.
To release press tabs and
pull apart.
3. Foracorrectt,adjust
shoulder straps and waist
band as shown.
1. Forasecuret,thestraps
should be at or above the
child’s shoulder. Adjust
the straps to the higher
position as your child
grows.
To Secure Child in Stroller
To Adjust Stroller Strap Height

10
To Fold Stroller
1
2
3
4
1. First, close the canopy and
put the seat in the upright
position. Pull the first lock
lever up to unlock.
2. Push down on the second
lock lever.
3. Push handle bars forward
and squeeze stroller
together.
4. Lock the clip on the side
of the stroller as shown.
To Fold Stroller

11
There are many ways to look after and protect your Jeep®stroller. The
most important is to clean up any spills or food, before it dries on the
fabric.
As the covers are not designed to be easily taken off for washing, (for
safety reasons) the easiest method to clean is, sponge the surfaces
with a mild solution of warm water liquid laundry detergent. Rinse well
with clean sponge and leave to dry out of direct sun.
Sand and Salt water should be rinsed with a hose and wiped dry to
prolong the life of the wheels, axles and other moving parts.
Never use petroleum based lubricants on your stroller, the most
suitable lubricants are silicone based products.
Jeep®is a registered trademark of DaimlerChrysler Corporation, and is
used under license by Born With Style. ©DaimlerChrysler Corporation
2007.
Born With Style warrants this product to be free of defects in materials
and workmanship as follows: For a period of ONE YEAR from the
date of purchase, Born With Style will repair or replace, at its option,
the defective product. This warranty is given in addition to (and not in
substitute for) applicable statutory rights which you may have.
We sincerely thank you for purchasing this Born With Style product.
For further information visit: www.bornwithstyle.com.au
Warranty
Care & Maintenance

12
For all spare parts, repairs or warranty issues, please contact:
Karlisles
Phone: [phone]
Email: [email protected]
Web: www.karlisles.com.au
Replacement parts provided by local distributor due to accidental
damage or misuse will be charged accordingly.
To contact the manufacturer directly:
Born With Style
PO Box 789
Gladesville NSW 1675, Australia
Phone: [phone] or 02 9816 3837
Email: [email protected]
Web: www.bornwithstyle.com.au
This product meets and exceeds Australian Standard
AS/NZS 2088:2000.
Born With Style recommends that you keep a record of important
information about your Jeep®stroller. Please complete the
information in the space provided.
Model Number:
Date of Manufacture:
Date of Purchase:
Personal Record Card
Contact Details
No refunds will be given on used product unless assessed by Karlises
as faulty. For all spare parts, repairs or warranty issues, please take
your product back to Toys R Us who will contact Karlisles, the service
agent on your behalf.