Jefferson JEFFANDRM30-110E User manual

User Manual
v.1.1
JEFFANDRM30-110E

USER MANUAL v.1.1
JEFFANDRM30-110E
30"HIGH VELOCITY DRUM FAN • 123W • 110V~50Hz
www.jeffersontools.com 3
INTRODUCTION
• A high-velocity two-speed drum fan capable of moving large volumes of air.
• Durable and robust design with heavy-duty gauge steel casing, guard, handle, wheels and frame.
• Cradle stand with tilt function allows exible control of airow when required.
• Balanced and fully guarded blades provide quiet and safe operation.
• Suitable for use in industrial, commercial, agricultural, automotive workshop and on-site applications.
• Energy efciency tested according to EU 206/2012 regulations and standards (ERP Compliant)
SPECIFICATIONS
Model Number: JEFFANDRM30-110E
Voltage ~ Frequency: 110V ~ 50Hz (16A)
Fan Diameter: 30” • 760mm
Power: 123W
Speed: High 900rpm
Low 830rpm
Air Flow: High 284.4cmm • 10043cfm
Low 154cmm • 5438cfm
Net Weight: 20.4kg
UNPACKING & ASSEMBLY
Upon receipt of the equipment, ensure all components are present and have remained undamaged in transit. Retain the packing materials
and packaging in case future transportation of the fan is necessary. We recommend that the packaging is kept, at least within the period of
the guarantee. The diagram and table shown below show the main components of the fan and how they are assembled for maintenance and
servicing.
Part # Part Description
1 Front Guard
2 Fan Blade
3 Drum Body
4 Rear Guard
5 Motor
6 Switch Box
7 Switch
8 Power Cable / Plug
9 Frame
10 Wheels

USER MANUAL v.1.1
JEFFANDRM30-110E
30"HIGH VELOCITY DRUM FAN • 123W • 110V~50Hz
www.jeffersontools.com
4
SAFETY GUIDELINES
Please read and ensure that you understand all of the operating instructions, safety precautions and warnings in this
Instruction Manual before operating or maintaining this equipment. An accident can often be avoided by recognizing
a potentially hazardous situation before it occurs, and by observing appropriate safety procedures. Hazards that
must be avoided to prevent bodily injury or machine damage are identied by warnings on the equipment and in this
Instruction Manual. Never use this equipment or modify it in any way that has not been specically recommended by the
manufacturer. Contact Jefferson Tools for all information relating to the repair and maintenance of this equipment. Contact
a qualied electrician for advice on any issues relating to electrical safety in your working environment.
Electrical Safety
Ensure that you check the equipment thoroughly to ensure it is safe and t for
purpose before each use. It is important that you inspect all plugs, sockets, power
cables and electrical ttings for wear and damage and repair or replace any defective
components. The risk of electric shock can be minimised by the correct use of the
appropriate electrical safety devices.
• We recommend that you t a Residual Current Circuit Breaker (RCCB) in the main distribution board
and that a Residual Current Device (RCD) is used when operating this equipment.
• The Electricity at Work Act 1989 includes legislation that places legal implications on employers
to ensure the safety of electrical devices in the workplace. The regulations dictate that all portable
equipment must be inspected regularly and tested to ensure that it is safe for use. 'Portable
equipment' means any electrical item that can be moved and this is often referred to as Portable
Appliance Testing (PAT). PAT testing should be carried out regularly on this equipment by trained,
authorised personnel, as required by the legislation.
• The Health and Safety at Work Act 1974 states that it is the responsibility of the owner of electrical
appliances to ensure that both the equipment and working environments are maintained to ensure
safe operation at all times.
• Check that all equipment cables are secure, correctly insulated, free from damage, and protected
against short circuit and overload before connecting to the power supply. Do not use worn or
damaged cables, plugs, sockets or other ttings.
• Ensure that the power supply matches voltage requirements specied on the equipment and that the plug is wired correctly and tted with
the correct fuse.
• If the electrical fuse blows, ensure it is replaced by an identical type of fuse with the same rating.
• Never pull or manoeuvre this equipment into position using the power cable.
• Ensure the power cable is kept away from heat, oil and sharp edges.
• We recommend that the equipment is connected directly to the power supply without the use of extension leads as the resulting voltage drop
can reduce motor performance.
• Always disconnect the equipment from the power source before servicing, inspecting, maintaining, cleaning, replacing or checking any parts.
General Equipment Safety
• Do not touch the fan until it has been disconnected from the mains power supply.
• Always disconnect the fan from the power supply when moving it from one location to another.
• Ensure fan is stood on a rm, level surface during operation.
• The air ow generated from this equipment is powerful. Before use ensure that there is nothing nearby that can be damaged or displaced by
the stream of air. Be careful that there are no naked ames or embers that can be blown by the air ow, even remotely.
• Keep the fan clean and maintained in good condition. For motor service contact an authorised service agent.
• Use only Jefferson approved replacement parts when repairing this equipment. Unapproved parts may be dangerous, and will invalidate your
warranty. Speak to your nearest Jefferson dealer for advice.
• Never operate the fan in environments containing explosive or ammable gases, fumes or other hazardous substances.
• Never allow the fan to be placed on top of the power cable.
• Do not insert any objects through the fan guard.
• Do not cover the fan when in use.
• Never immerse the fan in water or any other liquid.
• Never allow children to operate the fan - keep children and animals away from the equipment during operation.
• Never operate the fan in a position where it can be knocked over or off a surface, or where the lead may cause a person to trip.
• This equipment is not suitable for outdoor use.
• Do not modify the speed control or attempt to t any additional external speed control devices to the fan.
• When not in use place the fan in its original box, or otherwise cover, to protect from dust and store in a safe, dry, childproof environment.
• Always keep the user manual with the equipment for future reference.

USER MANUAL v.1.1
JEFFANDRM30-110E
30"HIGH VELOCITY DRUM FAN • 123W • 110V~50Hz
www.jeffersontools.com 5
OPERATION
Please ensure that you read, understand and apply safety instruc-
tions in before attempting to use this equipment.
Check that the speed control is set to “0” (OFF) and then plug into
the mains power supply and switch the power on.
The fan is equipped with 2 speed settings ("1" = Low "2" = High)
to control the rate of air ow delivered. Select the speed setting
you require using the switch located at the back of the fan, above
the motor.
Adjust the direction of the air ow by moving from side to side and
tilting the fan up or down, as required.
When you have nished using the fan ensure you turn the speed
control switch back to "0” (OFF) and disconnect the fan from the
mains
power.
MAINTENANCE
Equipment - General Cleaning:
• Use a soft, damp cloth to clean the fan after use .
• Never use solvents, petroleum, paint thinner or other chemicals to clean the fan.
Cleaning The Fan Blade:
• Undo the cross headed screws around the circumference, remove the grille and clean the blade with a slightly damp cloth.
• Replace the grille as required and ret the cross headed screws.
Servicing:
Should the motor, switch or the power lead require service or maintenance contact your local service agent.
Storage:
When not in use place the fan in its original box or otherwise cover to protect from dust, and store in a safe, dry, environment and safe from
children and animals.

USER MANUAL v.1.1
JEFFANDRM30-110E
30"HIGH VELOCITY DRUM FAN • 123W • 110V~50Hz
www.jeffersontools.com
6
ENVIRONMENTAL PROTECTION
Recycle any packaging and unwanted materials instead of disposing of them as waste. All tools, accessories and packaging
should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable, reaches the end of its working life and requires disposal, drain off any uids
(if applicable) into approved containers and dispose of the product and the uids according to local regulations.
WEEE Waste Electrical and Electronic Equipment Statement
Information on Disposal for Users of Waste Electrical & Electronic Equipment
This symbol on the product(s) and / or accompanying documents means that used electrical and electronic products should not
be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated
collection points where it will be accepted free of charge.
For private households:
Dispose of this product at the end of its working life and in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). Contact your local solid waste authority for recycling information for this equipment. Disposing of this product correctly will help
save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from
inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be
applicable for incorrect disposal of this waste, in accordance with you national legislation.
For business users in the European Union:
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union:
This symbol is only valid in the European Union. If you wish to discard this product please contact your local authorities or dealer
and ask for the correct method of disposal.
RoHS (2014/35/EU - Restriction of Hazardous Substances)
Based on randomly-sampled examination of the evaluated product, the results of Lead, Cadmium, Hexavalent chromium,
Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE) in tested samples comply with the limits as set by RoHS
Directive 2011/65/EU ANNEX II; recasting 2002/95/EC.
ErP (Energy Related Product) - Test Data (ErP 206)
Item Symbol Unit Value
Maximum fan ow rate F m3/min 284.8
Fan power input P W 115.8
Service value SV (m3/min)/W 2.5
Standby power consumption (PSB) W 0.0
Seasonal electricity consumption Q kWh/a 37.1
Fan sound power level (LWA) dB(A) 78
Maximum air velocity c meters/sec 2.3
Intertek Tesng Services Shenzhen Ltd. Guangzhou Branch
RoHS

USER MANUAL v.1.1
JEFFANDRM30-110E
30"HIGH VELOCITY DRUM FAN • 123W • 110V~50Hz
www.jeffersontools.com 7
EU DECLARATION OF CONFORMITY
We, Jefferson Professional Tools & Equipment, as the authorised UK representative of the
manufacturer, declare that this equipment conforms to the requirements of the following:
EN 62233:2008
EN 60335-2-80:2003+Al:2004+A2:2009
EN 60335-1:2012+All:2014+Al3:2017+Al:2019+A2:2019+Al4:2019
PAK-Anforderung fur GS (PAH requirement for GS} AfPS GS 2019:01 PAK
EU 206/2012 (ERP 206) Energy Related Products
Test Standards / Criteria:
IEC 60879:1986/COR1:1992
EN 50564:2011
EN 60704-1:2010+A11:2012
EN 60704-2-7:1998
2014/30/EU - EMC (Electro Magnetic Compatibility) Directive
2014/35/EU - LVD (Low Voltage Directive)
2011/65/EU - RoHS Directive
Regulation (EC) No 1907/2006 - Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)
Notified Testing Body: Intertek Testing Services Shenzhen Ltd. Guangzhou Branch
Equipment Category: Electric Fan
Description: JEFFANDRM30-110E • 30" High Velocity Floor Fan • 110V~50Hz
Signed By:
Date: 15.02.2022
Name and address of manufacturer or
authorised representative:
Jefferson Professional Tools & Equipment
24 Lisgorgan Lane, Upperlands, BT46 5TE,
Tel: [phone] (UK)
[phone] (ROI)
Email: [email protected]
UKCA DECLARATION OF CONFORMITY
We, Jefferson Professional Tools & Equipment, as the authorised UK representative of the manufacturer, declare that this equipment conforms
to the requirements of the following:
EN 60335-1:2012 + A11:2014 +A13:2017 + A1:2019 + A14:2019 + A2:2019
Household and similar electrical appliances – Safety – Part 1: General requirements
EN 60335-2-80:2003 + A1:2004 + A2:2009
Household and similar electrical appliances – Safety – Part 2-80: Particular requirements for fans
EN 62233:2008 Measurement methods for electromagnetic elds of household appliances and similar apparatus with regard to human expo-
sure
Notified Testing Body: Intertek Testing Services Shenzhen Ltd. Guangzhou Branch
Equipment Category: Electric Fan
Description: JEFFANDRM30-110E • 30" High Velocity Floor Fan • 110V~50Hz
Signed By:
Date:
15.02.2022
Name and address of manufacturer or
authorised representative:
Jefferson Professional Tools & Equipment
24 Lisgorgan Lane, Upperlands, BT46 5TE,
Tel: [phone] (UK)
[phone] (ROI)
Email: [email protected]

USER MANUAL v.1.1
JEFFANDRM30-110E
30"HIGH VELOCITY DRUM FAN • 123W • 110V~50Hz
www.jeffersontools.com
8
LIMITED WARRANTY STATEMENT
Jefferson Professional Tools & Equipment, or hereafter "Jefferson" warrants its customers that its products will be free of defects in workmanship
or material. Jefferson shall, upon suitable notication, correct any defects, by repair or replacement, of any parts or components of this product
that are determined by Jefferson to be faulty or defective.
This warranty is void if the equipment has been subjected to improper installation, storage, alteration, abnormal
operations, improper care, service or repair.
Warranty Period
Jefferson will assume both the parts and labour expense of correcting defects during the stated warranty periods below.
All warranty periods start from the date of purchase from an authorised Jefferson dealer. If proof of purchase is unavailable from the end user, then
the date of purchase will be deemed to be 3 months after the initial sale to the distributor.
1 Year:
JEFFANDRM30-110E • 30" HIGH VELOCITY FLOOR FAN • 110V~50Hz
90 Days
• All replacement parts purchased outside of the warranty period
Important: All parts used in the repair or replacement of warranty covered equipment will be subject to a minimum of 90 days cover or the
remaining duration of the warranty period from the original date of purchase.
Warranty Registration / Activation
You can register and activate your warranty by visiting the Jefferson Tools website using the following address:
www.jeffersontools.com/warranty and completing the online form. Online warranty registration is recommended as it eliminates the need to
provide proof of purchase should a warranty claim be necessary.
Warranty Repair
Should Jefferson confirm the existence of any defect covered by this warranty the defect will be corrected by repair or replacement at an
authorized Jefferson dealer or repair centre.
Packaging & Freight Costs
The customer is responsible for the packaging of the equipment and making it ready for collection. Jefferson will arrange collection and
transportation of any equipment returned under warranty. Upon inspection of the equipment, if no defect can be found or the equipment is not
covered under the terms of the Jefferson warranty, the customer will be liable for any labour and return transportation costs incurred.
These costs will be agreed with the customer before the machine is returned.
*Jefferson reserve the right to void any warranty for damages identified as being caused through misuse
Warranty Limitations
Jefferson will not accept responsibility or liability for repairs made by unauthorised technicians or engineers. Jefferson's liability under this
warranty will not exceed the cost of correcting the defect of the Jefferson products.
Jefferson will not be liable for incidental or consequential damages (such as loss of business or hire of substitute equipment etc.) caused by
the defect or the time involved to correct the defect. This written warranty is the only express warranty provided by Jefferson with respect to its
products.
Any warranties of merchantability are limited to the duration of this limited warranty for the equipment involved.
Jefferson is not responsible for cable wear due to flexing and abrasion. The end user is responsible for routine inspection of cables for possible
wear and to correct any issues prior to cable failure.

USER MANUAL v.1.1
JEFFANDRM30-110E
30"HIGH VELOCITY DRUM FAN • 123W • 110V~50Hz
www.jeffersontools.com 9
Claiming Warranty Coverage
The end user must contact Jefferson Professional Tools & Equipment (Tel: [phone] (UK), [phone] (ROI) or their nearest
authorised Jefferson dealer where final determination of the warranty coverage can be ascertained.
Step 1 - Reporting the Defect
Online Method:
• Visit our website www.jeffersontools.com/warranty and complete the Warranty Returns form. You can complete the form online and submit it
to us directly or download the form to print out and return by post.
Telephone Method:
Contact your Jefferson dealer or sales representative with the following information:
• Model number
• Serial number (usually located on the specification plate)
• Date of purchase
A Warranty Returns form will be sent to you for completion and return by post or fax, together with details of your nearest authorised Jefferson
repair centre. On receipt of this form Jefferson will arrange to collect the equipment from you at the earliest convenience.
Step 2 - Returning the Equipment
It is the customer's responsibility to ensure that the equipment is appropriately and securely packaged for collection, together with a copy of
the original proof of purchase. Please note that Jefferson cannot assume any responsibility for any damage incurred to equipment during
transit. Any claims against a third party courier will be dealt with under the terms & conditions of their road haulage association directives.
Please note: Jefferson will be unable to collect or process any warranty requests without a copy of the original proof of purchase.
Step 3 - Assessment and Repair
On receipt, the equipment will be assessed by an authorised Jefferson engineer and it will be determined if the equipment is defective and in need
of repair and any repairs needed are covered by the warranty policy. In order to qualify for warranty cover all equipment presented must have been
used, serviced and maintained as instructed in the user manual.
Where repair is not covered by the warranty a quotation for repair, labour costs and return delivery will be sent to the customer (normally within 7
working days).
Note: If the repair quotation is not accepted Jefferson Professional Tools & Equipment will invoice 1 hour labour time at £30 per hour plus return
carriage costs (plus VAT).
In cases where no fault can be found with the equipment, or, if incorrect operation of the equipment is identified as the cause of the problem, a
minimum of 1 hour labour at £30 per hour plus carriage costs will be required before the equipment will be despatched back to the customer.
Any equipment repaired or replaced under warranty will normally be ready for shipment back to the customer within 7 working days upon receipt
of the equipment at an authorised Jefferson Repair centre (subject to part availability). Where parts are not immediately available Jefferson will
contact you with a revised date for completion of the repair.
General Warranty Enquiries
For any further information relating to Jefferson warranty cover please call [phone] (UK) or [phone] (ROI) or send your
enquiry via email to [email protected]
Disclaimer:
The information in this document is to the best of our knowledge true and accurate, but all recommendations or suggestions are made without
guarantee. Since the conditions of use are beyond their control, Jefferson Tools® disclaim any liability for loss or damage suffered from the use of
this data or suggestions. Furthermore, no liability is accepted if use of any product in accordance with this data or suggestions infringes any patent.
Jefferson Tools® reserve the right to change product specifications and warranty statements without further notification. All images are for
illustration purposes only.

USER MANUAL v.1.1
JEFFANDRM30-110E
30"HIGH VELOCITY DRUM FAN • 123W • 110V~50Hz
www.jeffersontools.com
10
NOTES

Jefferson Professional Tools & Equipment
24 Lisgorgan Lane,
Upperlands,
BT46 5TE
Tel: [phone] (UK) / [phone] (ROI)
Email: [email protected]
IMPORTANT! SAFETY FIRST!
Before attempting to use this product please read
all the safety precautions and operating instructions
outlined in this manual to reduce the risk of fire,
electric shock or personal injury.
www.jeffersontools.com