Jefferson JEFBIN16TB User manual

www.jeffersontools.com
User Manual
v.1.1
JEFBIN16TB
12 x Small (red) bins.
Dims: 16.3 x 10.4 x 7.4cm
4 x Large (blue) bins.
Dims: 23 x 14.8 x 12.5cm
Heavy duty robust metal
frame with black powder
coated nish.
Magnetic strip for holding
additional tools and
magnetic ttings.
FEATURES MAINTENANCE
To clean the Benchtop Storage Bin System,
use and a damp cloth.
Avoid using any harsh or abrasive chemicals
as this can damage the nish.
Avoid placing the bins in front of or
close to heat sources.
SPECIFICATION
Refer to
instructions
Model No: JEFBIN16TB
Small (red) bins capacity: 1kg (per bin)
Large (blue) bins capacity: 2kg (per bin)
Magnetic bar capacity: 5kg
Overall capacity weight: 25kg
Dimensions: 69 x 28 x 72cm
25KG CAPACITY
BENCHTOP
STORAGE
BIN SYSTEM
16 PC

1. Bottom Feet (x2)
2. L-Bar Frame Legs (x2)
3. Bin Support Brackets (x3)
4. Vertical Support Bracket (x1)
5. Magnetic Tool Holder (x1)
6. Large Nuts (x10)
7. Large Bolts (x10)
8. Small Bolts (x3)
2. CONTENTS
1.1 The Benchtop Storage Bin Set is designed and intended for domestic use only. This unit is not a toy. Children should be supervised to ensure they do
not play with the Storage Bin Set. This unit contains small parts and components which pose a choking hazard to children and animals. Keep these
parts away from children and pets. Check the contents of the packaging against this user guide to ensure there are no missing or defective parts.
Never use defective parts. Assemble only as instructed within this user guide. Any deviation or shortcut may lead to incorrect assembly or be
considered customer misuse. Improper assembly may cause damage or serious injury.
1.2 Do not mount the Storage Bin Set to a vehicle.
1.3 Do not over-tighten any parts during assembly as this will damage the unit.
1.4 WARNING!
The Storage Bin Set should only be positioned on a at stable surface.
1.5 Do not overload the Bins. For stability, heavier items should always be placed in the bottom bins.
1.6 Do not rest or support items against the Storage Bin Set.
1.7 CAUTION:
To ensure continued safety, check the unit is secure and safe to use at regular intervals (every 3 months). Take appropriate action to rectify any
unstable or unsafe units.
1.8 If you do not understand these directions, or have any doubts regarding the safety of the assembly, please seek advice and guidance
from a qualied person.
1.9 WARNING!
Do not exceed the maximum stated load capacity of 25kg. Installing appliances heavier than recommended may result in damage
or serious injury.
www.jeffersontools.com
1. SAFETY
7
8
6
2
34
5
1
User Manual
v.1.1
JEFBIN16TB

www.jeffersontools.com
18
8
8
4
3
3
3
7
6
5
2
2
1
7
6
6
3.1 Use four sets of the Large Bolts (7) and Large Nuts (6) to attach the Bottom Feet (1) to the L-Bar Frame Legs (2).
NOTE: Ensure the Frame Legs sit inside the L Bracket.
3.2 Attach the three Bin Support Brackets (3) to the Frame Legs by aligning the eyelets and pushing down. Fasten the Vertical Support Bracket to the
Bin Support Brackets using the Small Bolts (8), tighten to secure.
3.3 Align the Magnetic Tool Holder (5) with the top holes of the Frame Legs and secure into place using the remaining Large Bolts and Nuts.
3.4 Once assembled ensure all Bolts and Nuts are tightened and secure.
3. ASSEMBLY
User Manual
v.1.1
JEFBIN16TB

LIMITED WARRANTY STATEMENT
Jefferson Professional Tools & Equipment, or hereafter "Jefferson" warrants its customers that its
products will be free of defects in workmanship or material. Jefferson shall, upon suitable notication,
correct any defects, by repair or replacement, of any parts or components of this product that are
determined by Jefferson to be faulty or defective.
This warranty is void if the equipment has been subjected to improper installation, storage, alteration,
abnormal operations, improper care, service or repair.
Warranty Period
Jefferson will assume both the parts and labour expense of correcting defects during the stated
warranty periods below.
All warranty periods start from the date of purchase from an authorised Jefferson dealer. If proof of
purchase is unavailable from the end user, then the date of purchase will be deemed to be 3 months
after the initial sale to the distributor.
1 Year
• Jefferson 16PC Benchtop Storage Bin System [JEFBIN16TB].
90 Days
• All replacement parts purchased outside of the warranty period
Important: All parts used in the repair or replacement of warranty covered equipment will be
subject to a minimum of 90 days cover or the remaining duration of the warranty period from
the original date of purchase.
Warranty Registration / Activation
You can register and activate your warranty by visiting the Jefferson Tools website using the
following address: www.jeffersontools.com/warranty and completing the online form.
Online warranty registration is recommended as it eliminates the need to provide proof of
purchase should a warranty claim be necessary.
Warranty Repair
Should Jefferson confirm the existence of any defect covered by this warranty the defect will
be corrected by repair or replacement at an authorized Jefferson dealer or repair centre.
Packaging & Freight Costs
The customer is responsible for the packaging of the equipment and making it ready for
collection. Jefferson will arrange collection and transportation of any equipment returned under
warranty. Upon inspection of the equipment, if no defect can be found or the equipment is not
covered under the terms of the Jefferson warranty, the customer will be liable for any labour
and return transportation costs incurred. These costs will be agreed with the customer before
the machine is returned.
NOTE: * Jefferson reserve the right to void any warranty for damages identified as being
caused through misuse *
Warranty Limitations
Jefferson will not accept responsibility or liability for repairs made by unauthorised technicians
or engineers. Jefferson's liability under this warranty will not exceed the cost of correcting the
defect of the Jefferson products.
Jefferson will not be liable for incidental or consequential damages (such as loss of business
or hire of substitute equipment etc.) caused by the defect or the time involved to correct the
defect. This written warranty is the only express warranty provided by Jefferson with respect to
its products.
Any warranties of merchantability are limited to the duration of this limited warranty for the
equipment involved.
Claiming Warranty Coverage
The end user must contact Jefferson Professional Tools & Equipment:
(Tel: [phone]) or their nearest authorised Jefferson dealer where final
determination of the warranty coverage can be ascertained.
Step 1 - Reporting the Defect
Online Method:
Visit our website www.jeffersontools.com/warranty and complete the Warranty Returns form.
You can complete the form online and submit it to us directly or download the form to print out
and return by post.
Telephone Method:
Contact your Jefferson dealer or sales representative with the following information:
• Model number
• Serial number (usually located on the specification plate)
• Date of purchase
A Warranty Returns form will be sent to you for completion and return by post or fax, together
with details of your nearest authorised Jefferson repair centre. On receipt of this form Jefferson
will arrange to collect the equipment from you at the earliest convenience.
Step 2 - Returning the Equipment
It is the customer’s responsibility to ensure that the equipment is appropriately and securely
packaged for collection, together with a copy of the original proof of purchase. Please note
that Jefferson cannot assume any responsibility for any damage incurred to equipment during
transit. Any claims against a third party courier will be dealt with under the terms & conditions
of their road haulage association directives.
NOTE: Jefferson will be unable to collect or process any warranty requests without a copy of
the original proof of purchase.
Step 3 - Assessment and Repair
On receipt, the equipment will be assessed by an authorised Jefferson engineer and it will
be determined if the equipment is defective and in need of repair and any repairs needed are
covered by the warranty policy. In order to qualify for warranty cover all equipment presented
must have been used, serviced and maintained as instructed in the user manual.
Where repair is not covered by the warranty a quotation for repair, labour costs and return
delivery will be sent to the customer (normally within 7 working days). Note: If the repair
quotation is not accepted Jefferson Professional Tools & Equipment will invoice 1 hour labour
time at £30 per hour plus return carriage costs (plus VAT).
In cases where no fault can be found with the equipment, or, if incorrect operation of the
equipment is identified as the cause of the problem, a minimum of 1 hour labour at £30 per
hour plus carriage costs will be required before the equipment will be despatched back to the
customer.
Any equipment repaired or replaced under warranty will normally be ready for shipment back to
the customer within 7 working days upon receipt of the equipment at an authorised Jefferson
Repair centre (subject to part availability). Where parts are not immediately available Jefferson
will contact you with a revised date for completion of the repair.
General Warranty Enquiries
For any further information relating to Jefferson warranty cover please call:
[phone] or send your enquiry via email to [email protected]
Disclaimer:
The information in this document is to the best of our knowledge true and accurate, but all
recommendations or suggestions are made without guarantee. Since the conditions of use are
beyond their control, Jefferson Tools® disclaim any liability for loss or damage suffered from
the use of this data or suggestions. Furthermore, no liability is accepted if use of any product
in accordance with this data or suggestions infringes any patent. Jefferson Tools® reserve the
right to change product specifications and warranty statements without further notification. All
images are for illustration purposes only.
www.jeffersontools.com
User Manual
v.1.1
JEFBIN16TB