Tennsco WBCK-3036 Instruction Manual

PK-2270622
ASSEMBLY INSTRUCTIONS & PARTS MANUAL
Workbench Caster Kit
Models: WBCK-3036, WBCK-3036S & WBCK-3036-3
RETAIN INSTRUCTIONS FOR FUTURE REFERENCERETAIN INSTRUCTIONS FOR FUTURE REFERENCE
Tennsco LLC., Dickson, TN 37056-1888 • [phone]
GENERAL SAFETY INFORMATIONGENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.
For safety, wear a pair of work gloves when assembling or performing any maintenance on units.
LIMITED WARRANTYLIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in
the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during
shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO
EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the
goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty
and are returned within the warranty period stated above.

ASSEMBLY OF WORKBENCH CASTER KIT
1. Align Caster Plate (Ref. No. 3) with holes in bottom ange of legs
2. Insert threaded stem of caster (Ref. No. 1) Swivel Caster or (Ref. No. 2) Rigid Caster through bottom side of plate
and leg then attach with lock washer and nut (Ref. No. 4).
3. Both swivel casters must be mounted on same end. Caster must be turned as shown to t inside of channel.

Flared Leg Unit
Adjustable Leg Unit
1
2
3
4
1
2
3
4

Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.However, should your unit contain missing or damaged parts, please contact your purchase location.
49B22749B227
Replacement Parts
REF.REF.
NO. DESCRIPTIONNO. DESCRIPTION PART NUMBERSPART NUMBERS
QTY.QTY.
2
2
2
4
SWCAST
RGCAST
CPLATE
--
Swivel Caster
Fixed Caster
Caster Plate
Nut & Lock Washer*
1
2
3
4
4
0
4
4
WBCK-3036WBCK-3036 WBCK-3036-SWBCK-3036-S
*Availble at local hardware store*Availble at local hardware store
WBCK-3036-3WBCK-3036-3
4
2
6
6
Swivel Casters
Fixed Casters
1
2
3
3
4
4