Jenn-Air JUR248RBCX User manual

JENN-AIR_REFRIGERATOR/
REFRIGERADOR/Rf:FRIGf:RATEUR
Overlay Model/Modelo recubierlo/Mod@le_panneau d(_coratif
USE& CAREGUIDE
For assistance, call: 1-800-JENNAIR (1-800-536-6247).
MANUAL DEUSOY CUIDADO
Para obtener ayuda, lame al: 1-800-JENNAIR (1-800-536-6247),
GUIDED'UTILISATIONETD'ENTRETIEN
Pour assistance, composer le J-800-JENNAIR (1-800-536-6247).
Table of Contents/Jndice/Table des matieres .............................................. 2
_]ENN-AIR°
2300279A

TABLEOF CONTENTS
REFRIGERATOR SAFETY ............................................................. 3
Proper Disposal of Your Old Refrigerator .................................... 3
INSTALLATION INSTRUCTIONS .................................................. 4
Tools and Parts ............................................................................ 4
Custom Overlay Panel ................................................................. 4
Location Requirements ................................................................ 5
Electrical Requirements ............................................................... 5
Unpack the Refrigerator ............................................................... 5
Install Custom Overlay Panel ....................................................... 6
Door Closing ................................................................................. 7
Base Grille .................................................................................... 8
REFRIGERATOR USE .................................................................... 8
Normal Sounds ............................................................................ 8
Using the Control ......................................................................... 8
REFRIGERATOR FEATURES ........................................................ 8
Refrigerator Shelves ..................................................................... 8
Lower Shelf ................................................................................... 9
DOOR FEATURES .......................................................................... 9
Door Bins ...................................................................................... 9
REFRIGERATOR CARE ................................................................. g
Cleaning ........................................................................................ 9
Changing the Light Bulb ............................................................. 10
Vacation and Moving Care ......................................................... 10
TROUBLESHOOTING .................................................................. 11
ASSISTANCE OR SERVICE ......................................................... 12
In the U.S.A. and Canada ........................................................... 12
WAR RANTY .................................................................................. 13
INDICE
SEGURIDAD DEL REFRIGERADOR ........................................... 14
C6mo deshacerse de su viejo refrigerador ............................... 14
INSTRUCCIONES DE INSTALACION ......................................... 15
Piezas y herramientas ................................................................ 15
Panel recubierto a la medida ..................................................... 15
Requisitos de ubicaci6n ............................................................. 16
Requisitos electricos .................................................................. 16
Desempaque el refrigerador ...................................................... 17
C6mo instalar el panel recubierto a la medida .......................... 17
C6mo cerrar la puerta ................................................................ 19
Rejilla de la base ........................................................................ 19
USO DE SU REFRIGERADOR ..................................................... 19
Sonidos normales ...................................................................... 19
Uso del control ........................................................................... 20
CARACTERiSTICAS DEL REFRIGERADOR .............................. 20
Estantes del refrigerador ............................................................ 20
Estante inferior ............................................................................ 20
CARACTERiSTICAS DE LA PUERTA ......................................... 20
Recipientes de la puerta ............................................................ 20
CUIDADO DEL REFRIGERADOR ................................................ 21
Limpieza ..................................................................................... 21
C6mo cambiar el foco ................................................................ 21
Cuidado durante las vacaciones y mudanzas ........................... 21
SOLUClC)N DE PROBLEMAS ...................................................... 22
AYUDA O SERVIClO TI_CNICO ................................................... 23
En EE.UU. y Canada .................................................................. 23
GARANT|A ..................................................................................... 24
TABLEDESMATIERES
SI_CURITI_ DU RI_FRIGI_RATEUR .............................................. 25
Mise au rebut de votre vieux refrigerateur ................................. 25
INSTRUCTIONS B'INSTALLATION ........................................... 26
Outillage et pieces ...................................................................... 26
Panneau decoratif personnalise ................................................ 26
Exigences d'emplacement ......................................................... 27
Specifications electriques .......................................................... 27
Deballage du refrigerateur ......................................................... 28
Installation du panneau decoratif personnalise ......................... 28
Fermeture de la porte ................................................................. 30
Grille de la base.......................................................................... 30
UTILISATION DU RI_FRIGI_RATEUR .......................................... 30
Sons normaux ............................................................................ 30
Utilisation de la commande ....................................................... 31
CARACTI_RISTIQUES DU RI_FRIGI_RATEUR ........................... 31
Tablettes du refrigerateur ........................................................... 31
Tablette inferieure ....................................................................... 31
CARACTI_RISTIOUES DE LA PORTE ......................................... 31
Balconnets de porte ................................................................... 31
ENTRETIEN BU RI_FRIGI_RATEUR ............................................ 31
Nettoyage ................................................................................... 31
Changement de I'ampoule d'eclairage ...................................... 32
Precautions & prendre pour les vacances et avant un
demenagement .......................................................................... 32
DI_PANNAGE ................................................................................. 33
ASSISTANCE OU SERVICE ......................................................... 34
Aux Ctats-Unis et au Canada ..................................................... 34
GARANTIE ..................................................................................... 35

REFRIGERATORSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:
•Plug into a grounded 3 prong outlet.
•Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Disconnect power before servicing.
• Replace all parts and panels before operating.
•Remove doors from your old refrigerator.
•Use nonflammable cleaner.
• Keep flammable materials and vapors, such as gasoline,
away from refrigerator.
• Use two or more people to move and install refrigerator.
SAVE THESE INSTRUCTIONS
ProperDisposalofYourOld Refrigerator
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.
Before You Throw Away Your Old Refrigerator or Freezer:
• Take off the door.
• Leave the shelves in place so that children may not easily
climb inside.
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are still dangerous
- even if they will sit for "just a few days." Ifyou are getting rid of
your old refrigerator, please follow these instructions to help
prevent accidents.

INSTALLATIONINSTRUCTIONS
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
• Hand drill or electric drill • Scissors
(properly grounded) • Masking tape
• _/2"Brad point doweling
drill bit • Tape measure
• Phillips screwdriver • Petroleum jelly
PARTS NEEDED:
Custom Overlay Door Panel--See "Overlay Panel--Rear View."
Hardware (Optional)
PARTS SUPPLIED:
• Flat-head screws (8) • Overlay plates (2)
• Round-head screws (8) • Overlay hooks (4)
If you plan to install a custom overlay panel, you will need to
create the panel yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
• The thickness of the wood overlay must be 3/4"(1.91 cm).
• Overlay panel must not weigh more than 20 Ibs (9.07 kg).
• Overlay panel weighing more than recommended may
cause damage to your refrigerator.
Overlay Panel-- Rear View
Create the custom overlay panel using the dimensions shown.
-
413/32 ''
1%e" (11.2 cm)
(3.33 cm)
/
297_ ''
(76.66 cm)
A
1%e .......@
(3.33 cm) (6.4 cm)
233/4''
(60,33 cm)
A. Overlay hook locations
Install Overlay Hooks
Using a Phillips screwdriver and eight flat-head screws attach the
overlay hooks to the back of the overlay panel. See "Overlay
Panel-Rear View," for overlay hook locations.
J
A
A. Overlay hooks (4)
Door Hinge Holes
• The views of the top and bottom hinge pin hole show a right-
hand hinge. Mirror the image for a left-hand hinge.
• We recommend using a C-Clamp and two pieces of scrap
wood (front and back) to help reinforce the overlay panel
when drilling the hinge pin holes.
Using a V2"Brad point doweling drill bit, drill a _/2"(1.27 cm)
deep hole into the top of the overlay panel for the top hinge
pin as shown. Top View
Front Surface
(1.35 mm) Back Surface
A. Radius 5.0

2. Drill a 1/2"(1.27 cm) deep hole in the bottom of the overlay
panel for the bottom hinge pin as shown. _" _,_ ,. , ' _ '_,
L
1_2"-J
(1.35 turn)
Bottom View
1/2"
(1.2 cm)
I
Front Surface
Back Surface
A. Radius 5,0
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
To ensure proper ventilation for your refrigerator, allow for a 1/4"
(6.35 mm) space on each side and at the top. When installing
your refrigerator next to a fixed wall, leave 21/2'' (6.35 cm)
minimum clearance on the hinge side to allow for the door to
swing open.
NOTE: It is recommended that you do not install the refrigerator
near an oven, radiator, or other heat source. Do not install in a
location where the temperature will fall below 55°F (13°C). For
best performance, do not install the refrigerator behind a cabinet
door or block the base grille.
II
1/4" (6.35 mm)
II
II
I I
s
21/2" (6.35 cm)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical
connection.
Recommended grounding method
A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an
extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, unplug refrigerator or disconnect power.
Unp :/;ck the 8®f cse /s'ky
Excessive Weight Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
Remove the Packaging
Remove tape and glue residue from surfaces before turning
on the refrigerator. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see "Refrigerator Safety."
• Dispose of/recycle all packaging materials.
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator
for cleaning or service, be sure to protect the floor.
Always pull the refrigerator straight out when moving it.
Do not wiggle or "walk" the refrigerator when trying to move
it, as floor damage could occur.

Clean Before Using
After you remove all of the package materials, clean the inside of
your refrigerator before using it. See the cleaning instructions in
"Refrigerator Care."
important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
For your protection, tempered glass is designed to shatter
into many small, pebble-size pieces. This is normal. Glass
shelves and covers are heavy. Use special care when
removing them to avoid impact from dropping.
IM PORTANT:
• Create custom overlay panel according to the specifications
in the "Custom Overlay Panel" section.
• Jenn-Air is not responsible for the removal or addition of
molding or decorative panels that would not allow access to
the refrigerator for service.
Remove the Door
IMPORTANT: Do not remove the grease from the washer, top
spacer or top hinge pin. Be sure to set aside the top hinge, top
spacer and washer for later use.
1. Using a Phillips screwdriver, remove the three screws from
the top hinge. Remove the top hinge.
2= Remove the three screws from the top spacer. Remove the
top spacer and washer.
3. Open the door. Lift the front of the door up, pulling straight
out to remove as shown.
Attach the Overlay Panel
NOTE: If the overlay hooks are not installed, see "Custom
Overlay Panel" for overlay hook locations.
1. Position the overlay panel _/2"(1.27 cm) higher than the door.
Be sure to position the overlay hooks to the pilot holes.
LJ
2. Insert the overlay hooks into the top of the holes in the door.
Push against the overlay panel to force the overlay hooks
deeper into the door. Pull the overlay panel straight down to
secure the overlay hooks to the door.
3. Using a Phillips screwdriver, attach the overlay plates to the
bottom of the overlay panel and door as shown.
J
/
B C D
A. Overlay panel
B. Door
C. Overlay plates (2)
D. Round-head screws (8)

Install the Door
IMPORTANT: To ensure proper operation, be sure to grease the
top hinge, top spacer and washer with petroleum jelly.
1. Using a Phillips screwdriver and three screws, attach the top
spacer to the door.
2. Using petroleum jelly, grease the bottom spacer hole and the
bottom hinge pin. Align the washer with the bottom spacer
hole.
3. Install the door by inserting the bottom hinge pin into the
bottom spacer hole. Be sure the washer remains in place.
Slowly lower the door straight and evenly onto the bottom
hinge pin. Close the door. Be sure the door properly aligns to
the cabinet.
NOTE: Provide additional support for the door when moving
the hinges. Do not depend on the door magnets to hold the
door in place while you are working.
4. Using masking tape, secure the door to the cabinet before
installing the top spacer as shown.
A. Topspacer
B. Masking tape
5. Place the washer on the top spacer and align the holes.
Grease the top hinge pin, top spacer and washer with
petroleum jelly. Insert the top hinge pin into the washer and
top spacer.
6. Using a Phillips screwdriver and three screws, attach the top
hinge to the cabinet as shown. AA
Door Closing
Your refrigerator has four leveling legs. Ifyour refrigerator seems
unsteady or you want the door to close more easily, adjust the
refrigerator's tilt using the instructions below.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Plug into a grounded 3 prong outlet.
2.
3.
Excessive Weight Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
Move the refrigerator into its final location.
Turn the leveling legs to the right to lower the refrigerator or
turn the leveling legs to the left to raise it. It may take several
turns of the leveling legs to adjust the tilt of the refrigerator.
NOTE: Having someone push against the top of the
refrigerator takes some weight off the leveling legs. This
makes it easier to adjust the leveling legs.
7.
i/......
A.Screws (3) D. Topspacer
B. TopHinge E.Door
C. Washer F. Overlaypanel
Remove the masking tape from the door.
C
D
E
F
4= Open the door and check to make sure that it closes as easily
as you like. If not, tilt the refrigerator slightly more to the rear
by turning both front leveling screws to the right. It may take
several more turns, and you should turn both leveling legs the
same amount.

Remove the Base Grille
1. Open the refrigerator door.
2. Using a Phillips screwdriver, remove the two screws. Push
both tabs in toward the center to release the base grille from
the refrigerator.
ABA
A.Tabs
B.Screws
3. Remove the base grille.
Replace the Base Grille
1. Open the refrigerator door.
2. Position the base grille so that both tabs align and the base
grille snaps into place. Replace the two screws. Tighten the
screws.
REFRIGERATORUSE
Your new refrigerator may make sounds that your old one didn't
make. Because the sounds are new to you, you might be
concerned about them. Most of the new sounds are normal. Hard
surfaces, such as the flooring and surrounding structures, can
make the sounds seem louder. The following describes the kinds
of sounds and what may be making them.
• Your refrigerator is designed to run more efficiently to keep
your food items at the desired temperatures and to minimize
energy usage. The high efficiency compressor and fans may
cause your refrigerator to run longer than your old one. You
may also hear a pulsating or high-pitched sound from the
compressor or fans adjusting to optimize performance,
• Rattling noises may come from the flow of refrigerant or items
stored inside the refrigerator.
• As each cycle ends, you may hear a gurgling sound due to
the refrigerant flowing in your refrigerator.
• You may hear water running into the drain pan when the
refrigerator is defrosting.
• You may hear clicking sounds when the refrigerator starts or
stops running.
For your convenience, your refrigerator control is preset at the
factory. When you first install your refrigerator, make sure that the
control is still preset to the mid-setting as shown.
Adjusting Controls
The mid-setting indicated in the previous section should be
correct for normal usage. The control is set correctly when
beverages are as cold as you like.
If you need to adjust the temperature, wait at least 24 hours
between adjustments and then recheck the temperature.
To make the refrigerator colder, adjust the control to the next
higher setting. To make the refrigerator less cold, adjust the
control to the next lower setting.
REFRIGERATORFEATURES
important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
For your protection, tempered glass is designed to shatter
into many small, pebble-size pieces. This is normal. Glass
shelves and covers are heavy. Use special care when
removing them to avoid impact from dropping.
Your model may have glass or wire shelves. Store similar foods
together and adjust the shelves to fit different heights. This
reduces the time the refrigerator door is open and saves energy.
To Remove and Replace Shelves:
1. Remove the shelf by lifting it up and out of the shelf brackets.
Remove the shelf.
2. Replace the shelf by inserting it into the shelf brackets.
NOTE: Be sure the shelf is level.

To Remove and Replace Lower Shelf:
1. Remove the shelf by lifting it up and pulling it forward.
2. Replace the shelf by lowering it on the guides.
DOOR FEATURES
Your refrigerator has three door bin locations for maximum
storage capacity.
To Reposition the Door Bins:
1. Remove the door bin by tilting it forward and pulling it out.
2. Replace the bin by placing the rear of the bin under the
support on the door and sliding into place.
REFRIGERATORCARE
2. Remove all removable parts from inside, such as shelves, etc.
3. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
• Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts, interior
and door liners or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
• To help remove odors, you can wash interior walls with a
mixture of warm water and baking soda (2 tbs to 1 qt
[26 g to 0.95 L] of water).
4. Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water. Do
not use abrasive or harsh cleaners, or cleaners containing
chlorine. These can scratch or damage materials. Dry
thoroughly with a soft cloth. For additional protection against
damage to painted metal exteriors, apply appliance wax (or
auto paste wax) with a clean, soft cloth. Do not wax plastic
parts.
NOTE: To keep your stainless steel refrigerator looking like
new and to remove minor scuffs or marks, it is suggested that
you use the manufacturer's approved Stainless Steel Cleaner
& Polish. To order the cleaner, see "Accessories."
IMPORTANT: This cleaner is for stainless steel parts only!
Do not allow the Stainless Steel Cleaner & Polish to come into
contact with any plastic parts such as the trim pieces,
dispenser covers or door gaskets. Ifaccidental contact does
occur, clean plastic part with a sponge and mild detergent in
warm water. Dry thoroughly with a soft cloth.
5. Replace the removable parts.
6. Clean the condenser coils regularly. They are located behind
the base grille. Coils may need to be cleaned as often as
every other month. This may help save energy.
• Remove the base grille. See "Base Grille."
• Use a vacuum cleaner with an extended attachment to
clean the condenser coils when they are dusty or dirty.
• Replace the base grille.
7. Plug in refrigerator or reconnect power.
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Clean the refrigerator about once a month to avoid build-up of
odors. Wipe up spills immediately.
To clean your refrigerator:
1. Unplug refrigerator or disconnect power.

NOTE:Notallappliancebulbswillfityourrefrigerator.Besureto
replacethebulbwithoneofthesamesize,shape,andwattage.
To change the light bulb:
1. Unplug refrigerator or disconnect power.
2. Using a Phillips screwdriver, remove the screw located at the
back of the light shield. Pull the light shield back to remove
the tabs from the appliance. Remove the light shield.
A. Light shield
B. Tabs
C. Screw
3. Replace the bulb.
4. Reinstall the light shield by inserting the tabs. Align the holes
and insert the screw. Tighten the screw.
5. Plug in refrigerator or reconnect power.
Vacations
If you choose to leave the refrigerator on while you're away, use
up any perishables and freeze other items.
If you choose to turn the refrigerator off before you leave, follow
these steps.
1. Remove all food from the refrigerator.
2. Unplug the refrigerator.
3. Clean the refrigerator. See "Cleaning."
4. Tape a rubber or wood block to the top of the door to prop it
open far enough for air to get in. This stops odor and mold
from building up.
Moving
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
1. Remove all food from the refrigerator.
2. Unplug the refrigerator.
3. Clean, wipe, and dry it thoroughly.
4. Take out all removable parts, wrap them well, and tape them
together so they don't shift and rattle during the move.
5. Tape the doors shut and tape the power cord to the back of
the refrigerator.
When you get to your new home, put everything back and refer to
the "Installation Instructions" section for preparation instructions.
10

TROUBLESHOOTING
Trythe solutions suggested here first in order to avoid the cost of an unnecessary service call.
Your refrigerator will not operate
Electrical Shock Hazard
Plug into agrounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Is the power supply cord unplugged? Plug into a grounded
3 prong outlet.
Has a household fuse blown, or has a circuit breaker
tripped? Replace the fuse or reset the circuit.
Is the Refrigerator Control turned to the OFF position?
See "Using the Control."
The lights do not work
•is the power supply cord unplugged? Plug into a grounded
3 prong outlet.
•Is a light bulb loose in the socket or burned out? See
"Changing the Light Bulb."
The motor seems to runtoo much
Is the temperature outside hotter than normal? Expect the
motor to run longer under warm conditions. At normal
outdoor temperatures, expect your motor to run about 40%
to 80% of the time. Under warmer conditions, expect it to run
even more of the time.
Has alarge amount of food just been added to the
refrigerator? Adding a large amount of food warms the
refrigerator. It is normal for the motor to run longer in order to
cool the refrigerator back down.
Is the door opened often? Expect the motor to run longer
when this occurs. In order to conserve energy, try to get
everything you need out of the refrigerator at once, keep food
organized so it is easy to find, and close the door as soon as
the food is removed.
•Is the control set correctly for the surrounding
conditions? See "Using the Control."
•is the door closed completely? Push the door firmly shut. If
it will not shut all the way, see "The door will not close
completely" later in this section.
•Are the condenser coils dirty? This obstructs air transfer
and makes the motor work harder. Clean the condenser coils.
See "Cleaning."
Temperature is too warm
is the door opened often? Be aware that the refrigerator will
warm when this occurs. In order to keep the refrigerator cool,
try to get everything you need out of the refrigerator at once,
keep food organized so it is easy to find, and close the door
as soon as the food is removed.
Has a large amount of food just been added to the
refrigerator? Adding a large amount of food warms the
refrigerator. It can take several hours for the refrigerator to
return to the normal temperature.
•Is the control set correctly for the surrounding
conditions? See "Using the Control."
•is the base grille blocked? For best performance, do not
install the refrigerator behind a cabinet door or block the base
grille.
There is interior moisture buildup
is the door opened often? To avoid humidity buildup, try to
get everything you need out of the refrigerator at once, keep
food organized so it is easy to find, and close the door as
soon as the food is removed. When the door is opened,
humidity from the room air enters the refrigerator. The more
often the door is opened, the faster humidity builds up,
especially when the room itself is very humid.
• Is it humid? It is normal for moisture to build up inside the
refrigerator when the air is humid.
•Is the food packaged correctly? Check that all food is
securely wrapped. Wipe off damp food containers before
placing in the refrigerator.
•Is the control set correctly for the surrounding
conditions? See "Using the Control."
11

The door isdifficult to open
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
•Is the gasket dirty or sticky? Clean the gasket and the
surface that it touches. Rub a thin coat of paraffin wax on the
gasket following cleaning.
The door will not close completely
• Are food packages blocking the door open? Rearrange
containers so that they fit more tightly and take up less
space,
• Are the shelves out of position? Put the shelves back into
their correct positions. See "Refrigerator Use" for more
information.
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
• Is the gasket sticking? Clean the gasket and the surface
that it touches. Rub athin coat of paraffin wax on the gasket
following cleaning.
ASSISTANCEOR SERVICE
Before calling for assistance or service, please check
"Troubleshooting." It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
_'_.....It'3@ _, _c__ ¢'_Y_"_#_'_'s_"_S_¢¢_
If the problem is not due to one of the items listed in the
"Troubleshooting" section...
Call the dealer from whom your appliance was purchased, or call
Maytag Services, LLC, Jenn-Air Customer Assistance at
1-800-JENNAIR (1-800-538-8247} U.S.A. and Canada to locate
an authorized service company. When calling, please know the
purchase date and the complete model and serial number of your
appliance. Be sure to retain proof of purchase to verify warranty
status.
If the dealer or service company cannot resolve your problem,
write to:
Maytag Services, LLC
Attn.: CAIW _Center
P.O. Box 2370
Cleveland, TN 37320-2370
Web address: www.jennair.com
Or call: 1-800-JENNAIR (1-800-536-6247) U,S.A. and Canada,
U.S. customers using TTY for deaf, hearing impaired or speech
impaired, call: 1-800-688-2080 (Monday - Friday, 8:00 a.m. -
8:00 p.m. Eastern Time).
NOTE: When writing or calling about a service problem, please
include the following information:
1. Your name, address and daytime telephone number.
2. Appliance model number and serial number.
3. Name and address of your dealer or servicer.
4. A clear description of the problem you are having.
5. Proof of purchase (sales receipt).
User's guides, service manuals and parts information are
available from Maytag Services, LLC, Customer Assistance,
12

JENN-AIR REFRIGERATORWARRANTY
ONE YEAR LIMITED WARRANTY
For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or
furnished with the product, Jenn-Air brand of Maytag Corporation or Maytag Limited (hereafter "Jenn-Air") will pay for factory specified
replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Jenn-Air designated
service company. This limited warranty applies only when the major appliance is used in the country in which it is purchased.
On models with a water filter: 30 day limited warranty on water filter. For 30 days from the date of purchase, when this filter is operated
and maintained according to instructions attached to or furnished with the product, Jenn-Air will pay for replacement parts to correct
defects in materials and workmanship.
SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CAVITY LINER AND SEALED REFRIGERATION SYSTEM PARTS
In the second through fifth years from the date of purchase, when this major appliance is operated and maintained according to
instructions attached to or furnished with the product, Jenn-Air will pay for replacement or repair of the refrigerator/freezer cavity liner
(including labor costs) if the part cracks due to defective materials or workmanship. Also, in the second through fifth years from the date
of purchase, Jenn-Air will pay for factory specified parts and labor to correct defects in materials or workmanship in the sealed
refrigeration system. These parts are: compressor, evaporator, condenser, dryer, and connecting tubing. Service must be provided by a
Jenn-Air designated service company.
ITEMS JENN-AIR WILL NOT PAY FOR
1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair
house fuses or to correct house wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty
coverage.
3. Repairs when your major appliance is used for other than normal, single-family household use.
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in
accordance with electrical or plumbing codes, or use of products not approved by Jenn-Air.
5. Any food loss due to refrigerator or freezer product failures.
6. Replacement parts or repair labor costs for units operated outside the United States or Canada.
7. Pickup and delivery. This major appliance is designed to be repaired in the home.
8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
g. Expenses for travel and transportation for product service in remote locations.
10. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with
published installation instructions.
11. Replacement parts or repair labor costs when the major appliance is use in a country other than the country in which it was
purchased.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED
HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. JENN-AIR SHALL NOT BE LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATETO STATE OR PROVINCE
TO PROVINCE.
Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized Jenn-Air dealer to determine if another
warranty applies.
If you need service, first see the "Troubleshooting" section of the Use & Care Guide. After checking "Troubleshooting," additional help
can be found by checking the "Assistance or Service" section or by calling Jenn-Air. In the U.S.A. and Canada, call 1-800-JENNAIR
(1-800-536-6247). 9/o6
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your major appliance
to better help you obtain assistance or service if you ever need it.
You will need to know your complete model number and serial
number. You can find this information on the model and serial
number label located on the product.
Dealer name
Address
Phone number
Model number
Serial number
Purchase date
13

SEGURIDADDELREFRIGERADOR
Su seguridad y la seguridad de los demas es muy importante.
Hemos incluido muchos mensajes importantes de seguridad en este manual yen su electrodomestico. Lea y obedezca siempre
todos los mensajes de seguridad.
Este es el simbolo de advertencia de seguridad.
Este sfmbolo le llama la atenci6n sobre peligros potenciales que pueden ocasionar la muerte o una lesi6n a
usted y a los demas.
Todos los mensajes de seguridad iran a continuaci6n del simbolo de advertencia de seguridad y de la palabra
"PELIGRO" o "ADVERTENCIA". Estas palabras significan:
Si no sigue las instrucciones de inmediato, usted puede
morir o sufrir una lesibn grave.
Si no sigue las instrucciones, usted puede morir o sufrir
una lesi6n grave.
Todos los mensajes de seguridad le diran el peligro potencial, le diran c6mo reducir las posibilidades de sufrir una lesi6n y Io que
puede suceder si no se siguen las instrucciones.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
ADVERTENCIA: Para reducir el riesgo de incendio, cheque electrico, o lesiones personales al usar su refrigerador siga
estas precauciones basicas:
• No quite la terminal de conexi6n a tierra.
• No use un cable electrico de extensi6n.
• Desconecte el suministro de energfa antes de darle servicio.
• Vuelva a colocar todos los componentes y paneles antes de
hacerlo funcionar.
• Remueva las puertas de su refrigerador viejo.
• Use un limpiador no inflamable.
• No use un adaptador.
• Mantenga los materiales y vapores inflamables, tales como
gasolina, alejados del refrigerador.
• Use dos o mas personas para mover e instalar el
refrigerador.
• Conecte a un contacto de pared de conexi6n a tierra de
3 terminales.
CONSERVAR ESTAS INSTRUCCIONES
Cbmo deshacerse de suviejo refrigerador
Peligro de Asfixia
Remueva las puertas de su refrigerador viejo.
No seguir esta instruccion puede ocasionar la muerte
o da_o al cerebro.
IMPORTANTE: El atrapamiento y asfixia de ni_os no es un
problema del pasado. Los refrigeradores tirados y abandonados
son un peligro, ann si van a quedar ahf "por unos pocos dfas". Si
Ud. esta por deshacerse de su refrigerador viejo, por favor siga
las instrucciones que se dan a continuaci6n para prevenir
accidentes.
Antes de tirar su viejo refrigerador o congelador:
• Saque la puerta.
• Deje los estantes en su lugar asi los nir_os no pueden meterse
adentro con facilidad.
14

INSTRUCCIONESDEINSTALACION
F_@;£O__"_ _,,,_,_y- _ _,_,,,_,_,,,
HERRAMIENTAS NECESARIAS:
ReQna las herramientas y piezas necesarias antes de comenzar
la instalaci6n.
Lea y siga las instrucciones provistas con cualquiera de las
herramientas enlistadas aqui.
• Taladro manual o • Tijeras
electrico (debidamente
conectado a tierra) • Cinta adhesiva protectora
• Cinta para medir
• Broca de barrena con
punta para cabillas de 1/2" • Petrolato
• Destornillador Phillips
PIEZAS NECESARIAS:
Panel de la puerta recubierta a la medida - Yea "Panel recubierto
- Vista posterior".
Herrajes (opcionales)
PIEZAS SUMINISTRADAS:
• Tornillos de cabeza plana • Placas recubiertas (2)
(8) • Ganchos recubiertos (4)
• Tornillos de cabeza
redonda (8)
_c_r_e _7_cub e_s @{s meal d<{s}
Siva a instaIar un pane( recubierto a la medida, debera hacer(o
usted mismo o consultar con un carpintero o fabricante de
gabinetes caIificado, Para obtener informaci6n acerca de (as
especificaciones de (os paneIes, yea (os graficos dimensiona(es.
IMPORTANTE:
• El grosor de la cubierta de madera debe ser de 3/4"
(1,91 cm).
• El panel recubierto no debe pesar mas de 20 Ib (9,07 kg).
• Un panel recubierto que pese mas de Io recomendado
puede dar_ar su refrigerador.
Panel recubierto - Vista posterior
Cree su panel recubierto a la medida utilizando las medidas que
se muestran.
I413/32 '
15/W ' ._;(11,2 cm)
(3,33 cm) _--
(3,33 cm) "7 zy2'
r;(6, 4cm )
I- 233/4"
(60,33 cm)
A. Ubicaciones de los ganchos recubiertos
Cbmo instalar los ganchos recubiertos
Con un destornillador Phillips y ocho tornillos de cabeza plana
ajuste los ganchos recubiertos a la parte posterior del panel
recubierto. Consulte "Panel recubierto - Vista posterior" para ver
las ubicaciones de los ganchos recubiertos.
A
A. Ganchos recubiertos (4)
15

Orificios de la bisagra de la puerta
• Las vistas del orificio de la espiga de la bisagra superior e
inferior ilustran una bisagra del lade derecho. Refleje la
imagen para una bisagra del lado izquierdo.
Recomendamos usar una abrazadera en C y dos piezas de
madera de deshecho (adelante y atras) para ayudar a reforzar
el panel recubierto cuando taladre los orificios de la espiga
de la bisagra.
Con una broca de barrena con punta para cabillas de V2",
taladre un orificio de Y2"(1,27 cm) de profundidad en la parte
superior del panel recubierto para la espiga de la bisagra
superior, como se muestra.
Vista superior
AI(1,2 cm)
Superficie frontal
17/32"7
(1,35 mm) Superficie trasera
2=
A. Radio de 5,0
Taladre un orificio de V2"(1,27 cm) de profundidad en la parte
inferior del panel recubierto para la espiga de la bisagra
inferior, como se muestra.
Vista inferior
1/2"
(1,2 cm)
I
___ Superficie frontal
I Superficie trasera
A. Radio de 5,0
NOTA: No se recomienda instalar el refrigerador cerca de un
homo, radiador u otra fuente de calor. No instale en un lugar
donde la temperatura puede ser menor de 55°F (13°C). Para
obtener un 6ptimo funcionamiento, no instale el refrigerador
detras de la puerta de un armario ni bloquee la rejilla de la base.
I I II
1/4"(6.35 mm)
t
II
II
21/2" (6.35 cm)
Peligro de Choque Electrico
Conecte a un contacto de pared de cone×ion a tierra de
3terminales.
No quite la terminal de cone×ion a tierra.
No use un adaptador.
No use un cable el_ctrico de e×teneion.
No seguir eetae instruccionee puede ocas_onar
la muerte, incendio o choque el_ctrico.
Peligre de E×plesion
Mantenga los materiales y vapores inflamables,
tales como gaeolina, alejados del refrigerador.
No seguir esta inetruccion puede ocasionar la muerte,
e×plosion, o incendio.
Para asegurarse la ventilaci6n adecuada del refrigerador, deje un
espacio de V4" (6,35 mm) a cada lade y pot encima. Si Ud.
instala el refrigerador pr6ximo a una pared fija, deje come minimo
2V_" (6,35 cm) del lado de la bisagra para permitir que la puerta
abra bien.
Antes de mover el refrigerador a su ubicaci6n final, es importante
asegurarse que tiene la conexi6n electrica adecuada.
M_todo de conexibn a tierra recomendado
Se requiere una fuente de energfa electrica de 115 Voltios,
60 Hz., CA solamente y con fusibles de 15 6 20 amperios,
debidamente conectados a tierra. Se recomienda que use un
circuito separado s61o para su refrigerador. Use un tomacorriente
que no se pueda apagar con un interruptor. No use un cable
electrico de extensi6n.
NOTA: Antes de realizar cualquier tipo de instalaci6n, limpieza o
de quitar un foco de luz, desenchufe el refrigerador o desconecte
el suministro de energ[a.
16

Peligro de Peso Excesivo
Use dos o mas personas para mover einstalar
el refrigerador.
No seguir esta instrucci6n puede ocasionar una
lesi6n en la espalda uotro tipo de lesiones.
Cbmo quitar los materiales de empaque
Quite los restos de cinta y goma de las superficies de su
refrigerador antes de encenderlo. Frote un poco de
detergente Ifquido para vajillas sobre el adhesivo con los
dedos. Limpie con agua tibia y seque,
No use instrumentos filosos, alcohol para fricciones, Ifquidos
inflamables o productos de limpieza abrasivos para eliminar
los restos de cinta o goma, Estos productos pueden daSar la
superficie de su refrigerador. Para mas informaci6n, vea
"Seguridad del refrigerador".
• Deshagase de todos los materiales de embalaje o reciclelos.
Como mover su refrigerador:
Su refrigerador es muy pesado. Cuando mueva su
refrigerador para limpiarlo o darle servicio, proteja el piso.
AI mover el refrigerador, siempre tire directamente hacia
afuera. No menee el refrigerador de lado a lado ni Io haga
"caminar" cuando Io trate de mover ya que podria dar_ar
el piso.
IMPORTANTE:
• Cree un panel recubierto a la medida de acuerdo con las
especificaciones en la secci6n "Panel recubierto a la
medida".
• Jenn-Air no es responsable de la remoci6n o adici6n de
molduras o paneles decorativos que pudieran impedir el
acceso al refrigerador para darle servicio,
Cbmo quitar la puerta
IMPORTANTE: No quite la grasa de la arandela, del espaciador
superior o de la espiga de la bisagra superior. Aseg0rese de
apartar la bisagra superior, el espaciador superior y la arandela
para su uso posterior.
1. Quite con un destornillador Phillips los tres tornillos de la
bisagra superior. Saque la bisagra superior.
Limpieza antes del uso
Una vez que usted haya quitado todos los materiales de
empaque, limpie el interior de su refrigerador antes de usarlo.
Vea las instrucciones de limpieza en "Cuidado de su
refrigerador".
Informaci6n importante para saber acerca de los estantes
ytapas de vidrio:
No limpie los estantes y tapas de vidrio con agua caliente
mientras estb,n frios. Los estantes y tapas pueden romperse
si se exponen a cambios bruscos de temperatura o impacto,
como seria un golpe brusco. Para su protecci6n, el vidrio
templado se ha diseSado para hacerse afiicos. Esto es normal.
Los estantes y tapas de vidrio son muy pesados. Tenga
mucho cuidado al sacarlos para evitar que se daSen al caer.
A. Tornillos (3)
B. Bisagra superior
C. Arandela
D. Espaciador superior
E. Puerta
2. Quite los tres tornillos del espaciador superior. Quite el
espaciador superior y la arandela.
3. Abra la puerta, Levante la parte frontal de la puerta, jalando
directamente hacia fuera para quitarla como se muestra.
17

Cbmofijarelpanelrecubierto
NOTA: Si los ganchos recubiertos no estan instalados, consulte
"Panel recubierto a la medida" para ver las ubicaciones de los
ganchos recubiertos.
1. Ubique el panel recubierto 1/2"(1,27 cm) por encima de la
puerta. AsegOrese de ubicar los ganchos recubiertos en los
orificios piloto.
_q
LJ
LJ
2. Inserte los ganchos recubiertos en los orificios superiores de
la puerta. Empuje nuevamente el panel recubierto para forzar
los ganchos recubiertos aQn mas dentro la puerta. Jale el
panel recubierto directamente hacia abajo para asegurar los
ganchos recubiertos en la puerta.
3. Ajuste con un destornillador Phillips las placas recubiertas a
la parte inferior del panel recubierto y de la puerta, come se
muestra.
3=
4.
Instale la puerta insertando la espiga de la bisagra inferior en
el orificio del espaciador inferior. AsegQrese de que la
arandela se mantenga en su lugar. Lentamente baje la puerta
en forma derecha y pareja hasta la espiga de la bisagra
inferior. Cierre la puerta. AsegQrese de que la puerta este
correctamente alineada con el gabinete.
NOTA: Provea un soporte adicional para la puerta cuando
mueve las bisagras. No se confie en que los imanes de las
puertas van a sostener la puerta en su lugar mientras trabaja.
Asegure la puerta al gabinete con cinta adhesiva protectora
antes de instalar el espaciador superior, como se muestra.
A. Espaciador superior
B. Cinta adhesiva protectora
5. Ubique la arandela en el espaciador superior y alinee los
orificios. Engrase la espiga de la bisagra superior, el
espaciador superior y la arandela con petrolato. Inserte la
espiga de la bisagra superior en la arandela y el espaciador
superior.
6. Ajuste la bisagra superior al gabinete con un destomillador
Phillips y tres tornillos, como se muestra.
/
A
A. Panel recubierto
B. Puerta
C. Placas recubiertas (2)
D. Tomillos de cabeza redonda (8)
Cbmo instalar la puerta
IMPORTANTE: Para asegurar el funcionamiento adecuado, no
olvide engrasar la bisagra superior, el espaciador superior y la
arandela con petrolato.
1. Ajuste el espaciader superior a la puerta con un
desternillador Phillips y tres temilles.
2. Engrase con petrolato el orificio del espaciador inferior y la
espiga de la bisagra inferior. Alinee la arandela con el orificio
del espaciador inferior.
A. Tornillos (3) D. Espaciador
B. Bisagra superior superior
C. Arandela E. Puerta
F Panel
recubierto
7. Quite la cinta adhesiva protectora de la puerta.
18

O6mo cerrar la puerta
Su refrigerador tiene cuatro patas niveladoras. Si su refrigerador
parece inestable ousted quiere que las puertas se cierren con
mayor facilidad, ajuste la inclinaci6n del refrigerador usando las
instrucciones siguientes.
Peligro de Choque Eiectrico
Conecte a un contacto de pared de cone×i6n a tierra de
3 terminales.
No quite la terminal de cone×i6n a tierra.
No use un adaptador.
No use un cable el_ctrico de e×tensi6no
No seguir eetas instrucciones puede ocasionar
la muerte, incendio ochoque el_ctrico.
Conecte a un contacto de pared de conexi6n a tierra de
3 terminales.
2.
3.
Peligro de Peso Exceeivo
Use doe o mas personas para mover e instalar
el refrigerador.
No eeguir eeta instrucci6n puede ocaeionar una
lesi6n en la eepalda uotto tipo de leeiones.
Mueva el refrigerador hacia su posici6n final.
Gire las patas niveladoras hacia la derecha para bajar el
refrigerador o girelas hacia la izquierda para levantarlo. Puede
precisar darle varias vueltas alas patas niveladoras para
ajustar la inclinaci6n del refrigerador.
NOTA: Para quitar un poco de peso de las patas niveladoras,
haga que alguien empuje la parte superior del refrigerador.
Esto facilita el ajuste de las patas niveladoras.
4. Abra la puerta y verifique para asegurarse de que se cierra
con la facilidad que usted desea. De Io contrario, incline el
refrigerador ligeramente mas hacia la parte posterior, girando
ambos tornillos reguladores frontales hacia la derecha.
Puede tomar varias vueltas mas, y usted debera girar ambas
patas niveladoras la misma cantidad de veces.
Quite la rejilla de la base
1. Abra la puerta del refrigerador.
2. Saque los dos tornillos con un destornillador Phillips. Empuje
ambas lengLietas hacia el centre para liberar la rejilla de la
base del refrigerador.
/Lt
A B A
A. Lengf_etas
B. Tomillos
3. Quite la rejilla de la base.
Vuelva a colocar la rejilla de la base
1. Abra la puerta del refrigerador.
2. Coloque la rejilla de la base de manera que ambas lengOetas
esten alineadas y la rejilla de la base encaje en su lugar.
Vuelva a colocar los dos tornillos. Apriete los tornillos.
USODESUREFRIGERADOR
Su nuevo refrigerador puede hacer sonidos que su viejo
refrigerador no hacia. Come estos sonidos son nuevos para Ud.,
puede ser que se preocupe. La mayoria de los sonidos nuevos
son normales. Las superficies duras tales como el piso y las
estructuras circundantes pueden hacer que los sonidos parezcan
mas fuertes. A continuaci6n se describen los tipos de sonidos y
que puede causarlos.
• Su refrigerador esta dise_ado para funcionar con mas
eficiencia para conservar sus alimentos a la temperatura
deseada. El compresor y los ventiladores de alta eficiencia
pueden causar que su nuevo refrigerador funcione per
periodos de tiempo mas largos que su refrigerador viejo.
Tambien puede escuchar un sonido pulsante o agudo del
compresor o los ventiladores que se ajustan para un
funcionamiento 6ptimo.
• Las vibraciones pueden producirse por el flujo de liquido
refrigerante o articulos guardados dentro del refrigerador.
• AI final de cada ciclo, Ud. puede escuchar un gorgoteo
debido al flujo de liquido refrigerante en su refrigerador.
• Ud. puede escuchar agua corriendo hacia la bandeja
recolectora cuando el refrigerador se esta descongelando.
• Es posible que escuche sonidos como de chasquido cuando
el refrigerador comienza o deja de funcionar.
19

Para su comodidad, el control de su refrigerador ha sido
prefijado de fabrica. AI instalar su refrigerador por primera vez,
cercidrese de que el control ann este prefijado en el ajuste medio,
como se ilustra,
Colder
OFF _
Coldest
_sssss__ssssss_/_,/
Cbmo ajustar los controles
El ajuste medio indicado en la secci6n previa debe estar correcto
para el uso normal de un refrigerador familiar en el hogar. El
control esta fijado correctamente cuando las bebidas estan tan
frias como a usted le gusta,
Si necesita ajustar la temperatura, espere por Io menos 24 horas
entre un ajuste y otro, y despues vuelva a verificar la
temperatura.
Para hacer que el refrigerador este mas fr[o, coloque el control en
el siguiente ajuste mas alto, Para hacer que el refrigerador este
menos frio, coloque el control en el siguiente ajuste mas bajo.
CARACTERISTICASDEL
REFRIGERADOR
Informacion irnportante para saber acerca de los estantes
y tapas de vidrio:
No limpie los estantes y tapas de vidrio con agua caliente
mientras estan frios. Los estantes y tapas pueden romperse
si se exponen a cambios bruscos de temperatura o impacto,
como seria un golpe brusco. Para su protecci6n, el vidrio
templado se ha diseSado para hacerse aSicos. Esto es normal.
Los estantes y tapas de vidrio son muy pesados. Tenga
mucho cuidado al sacarlos para evitar que se daSen al caer.
Para quitar y volver a colocar el estante inferior:.
1. Quite el estante levant£ndolo y jal£ndolo hacia afuera.
2. Vuelva a colocar el estante bajandolo sobre las guias.
CARACTERISTICASDELA
PUERTA
Su refrigerador tiene tres lugares para colocar los recipientes de
la puerta para maximizar la capacidad de almacenamiento.
Para volver a colocar los recipientes de la puerta:
1. Quite el recipiente de la puerta inclinandolo hacia adelante y
jalandolo hacia afuera.
2. Vuelva a colocar el portalatas colocando la parte posterior
debajo del soporte que esta en la puerta y deslizandolo en su
lugar.
8u modelo podri tener estantes de vidrio o de alambre. Guarde
los alimentos similares juntos y ajuste los estantes para que se
adapten alas diferentes alturas. Esto reduce el tiempo que la
puerta del refrigerador esta abierta a la vez que ahorra energia.
Para quitar y volver a colocar los estantes:
1. Quite el estante levantandolo y jalandolo hacia fuera de los
soportes del mismo, Saque el estante.
2. Vuelva a colocar el estante insertandolo sobre los soportes
del mismo.
NOTA: Cerci6rese de que el estante este nivelado.
20