Jenn-Air WINE CELLAR/BODEGA User manual

JENN-AIR®WINE CELLAR/BODEGA/CAVE À VIN
W10549544A
USE & CARE GUIDE
For questions about features, operation/performance, parts, accessories, or service, call:
1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.
In Canada, call: 1-800-JENNAIR (1-800-536-6247), or visit our website at www.jennair.ca.
MANUAL DE USO Y CUIDADO
Si tiene preguntas respecto a las características, funcionamiento, rendimiento, partes, accesorios o servicio técnico, llame al:
1-800-JENNAIR (1-800-536-6247) o visite nuestro sitio de internet www.jennair.com.
En Canadá, llame al: 1-800-JENNAIR (1-800-536-6247), o visite nuestro sitio de internet www.jennair.ca.
GUIDE D’UTILISATION ET D’ENTRETIEN
Au Canada, pour assistance, installation ou service, composez le 1-800-JENNAIR (1-800-536-6247)
ou visitez notre site web à www.jennair.ca.
Table of Contents/Índice/Table des matières ......................................................................................2

2
TABLE OF CONTENTS
WINE CELLAR SAFETY .............................................................................. 3
Proper Disposal of Your Old Wine Cellar ................................................. 3
INSTALLATION REQUIREMENTS ............................................................. 4
Location Requirements............................................................................. 4
Product Dimensions ................................................................................. 5
Electrical Requirements............................................................................ 5
INSTALLATION INSTRUCTIONS ............................................................... 6
Unpack the Wine Cellar ............................................................................ 6
Door Closing ............................................................................................. 6
WINE CELLAR USE..................................................................................... 7
Normal Sounds ......................................................................................... 7
Using the Control......................................................................................7
Wine Racks............................................................................................... 7
Stocking the Wine Cellar .......................................................................... 8
Lighting the Wine Cellar............................................................................ 8
WINE CELLAR CARE.................................................................................. 8
Base Grille................................................................................................. 8
Cleaning.................................................................................................... 9
Vacation and Moving Care....................................................................... 9
TROUBLESHOOTING ............................................................................... 10
ASSISTANCE OR SERVICE...................................................................... 11
In the U.S.A............................................................................................. 11
In Canada................................................................................................ 11
WARRANTY ............................................................................................... 12
ÍNDICE
SEGURIDAD DE LA BODEGA..................................................................14
Cómo deshacerse adecuadamente de su bodega vieja .......................15
REQUISITOS DE INSTALACIÓN..............................................................15
Requisitos de ubicación .........................................................................15
Medidas del producto............................................................................. 16
Requisitos eléctricos...............................................................................16
INSTRUCCIONES DE INSTALACIÓN......................................................17
Desempaque de la bodega ....................................................................17
Cierre de la puerta ..................................................................................17
USO DE LA BODEGA................................................................................18
Sonidos normales...................................................................................18
Uso del control........................................................................................18
Portabotellas........................................................................................... 18
Cómo almacenar en la bodega .............................................................. 19
Cómo iluminar la bodega ....................................................................... 19
CUIDADO DE LA BODEGA ...................................................................... 19
Rejilla de la base..................................................................................... 19
Limpieza.................................................................................................. 20
Cuidado durante las vacaciones y mudanzas ....................................... 20
SOLUCIÓN DE PROBLEMAS................................................................... 21
AYUDA O SERVICIO TÉCNICO................................................................ 22
En los EE.UU........................................................................................... 22
En Canadá .............................................................................................. 22
GARANTÍA ................................................................................................. 23
TABLE DES MATIÈRES
SÉCURITÉ DE LA CAVE À VIN.................................................................25
Mise au rebut de votre vieille cave à vin.................................................26
EXIGENCES D’INSTALLATION................................................................26
Exigences d’emplacement .....................................................................26
Dimensions du produit............................................................................27
Spécifications électriques.......................................................................27
INSTRUCTIONS D’INSTALLATION .........................................................28
Déballage de la cave à vin......................................................................28
Fermeture de la porte .............................................................................28
UTILISATION DE LA CAVE À VIN ............................................................29
Sons normaux.........................................................................................29
Utilisation de la commande....................................................................29
Grilles pour le remisage du vin ...............................................................29
Stockage dans la cave à vin................................................................... 30
Éclairage de la cave à vin....................................................................... 30
ENTRETIEN DE LA CAVE À VIN .............................................................. 30
Grille de la base ...................................................................................... 30
Nettoyage ............................................................................................... 31
Précautions à prendre pour les vacances
et avant un déménagement.................................................................... 31
DÉPANNAGE ............................................................................................. 32
ASSISTANCE OU SERVICE...................................................................... 33
Aux États-Unis........................................................................................ 33
Au Canada .............................................................................................. 33
GARANTIE.................................................................................................. 34

3
WINE CELLAR SAFETY
Proper Disposal of Your
Old Wine Cellar
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned wine cellars are still dangerous
– even if they will sit for “just a few days.” If you are getting rid of
your old wine cellar, please follow these instructions to help
prevent accidents.
Before You Throw Away Your Old Wine Cellar:
■Take off the door.
■Leave the racks in place so that children may not easily climb
inside.
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury when using your wine cellar, follow these basic precautions:
SAVE THESE INSTRUCTIONS
■Plug into a grounded 3 prong outlet.
■Do not remove ground prong.
■Do not use an adapter.
■Do not use an extension cord.
■Disconnect power before servicing.
■Replace all parts and panels before operating.
■Remove doors from your old wine cellar.
■Use nonflammable cleaner.
■Keep flammable materials and vapors, such as gasoline,
away from wine cellar.
■Use two or more people to move and install wine cellar.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
WARNING
Suffocation Hazard
Remove door from your old wine cellar.
Failure to do so can result in death or brain damage.
Important information to know about disposal of
refrigerants:
Dispose of refrigerator in accordance with Federal and Local
regulations. Refrigerants must be evacuated by a licensed,
EPA certified refrigerant technician in accordance with
established procedures.

4
INSTALLATION REQUIREMENTS
Location Requirements
NOTES:
■For the wine cellar to be flush with the front of the base
cabinets remove any baseboards or moldings from the rear of
the opening. See “Product Dimensions” and later in this
section “Opening Dimensions.”
■It is recommended that you do not install the wine cellar near
an oven, radiator, or other heat source.
■Do not install in a location where the temperature will fall
below 55°F (13°C). For best performance, do not install the
wine cellar behind a cabinet door or block the base grille.
Opening Dimensions
■Height dimensions are shown with the leveling legs extended
to the minimum height.
NOTE: When leveling legs are fully extended, add ⁵⁄₈"
(15.9 mm) to the height dimensions. See “Product
Dimensions.”
■If the floor of the opening is not level with the kitchen floor,
shim the opening to make it level with the kitchen floor.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from wine cellar.
Failure to do so can result in death, explosion, or fire.
Critical Dimensions:
A. 14
³⁄₄ " (37.5 cm) utility opening
B. 24" (60.96 cm) minimum opening width
¹⁄₂"
(1.3 cm)
A
14³⁄₄"
(37.5 cm)
24"
(60.96 cm)
min.
24" (60.96 cm) min.
34³⁄₈" (87.3 cm) min.
35" (88.9 cm) max.
B

5
Product Dimensions
■Height dimensions are shown with the leveling legs NOT
extended.
■The power cord is 60" (152.4 cm) long.
Front View
Side View (door open 90°)
Top View
Electrical Requirements
Before you move your wine cellar into its final location, it is
important to make sure you have the proper electrical connection.
Recommended grounding method
A 115 Volt, 60 Hz., AC only, 15– or 20–amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your wine cellar be provided. Use an outlet
that cannot be turned off by a switch. Do not use an
extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, unplug wine cellar or disconnect power.
30¹⁄₈"
(76.6 cm) 34¹⁄₈"
(86.8 cm)
34³⁄₈"
(87.4 cm)
26¹⁄₈"
(66.4 cm)
47³⁄₄"
(121.4 cm)
*Dimension includes Euro-series style handle
23⁷⁄₈"
(60.6 cm)
21⁵⁄₈"
(55.0 cm)
26" *
(66.0 cm)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING

6
INSTALLATION INSTRUCTIONS
Unpack the Wine Cellar
Remove the Packaging
■Remove tape and glue residue from surfaces before turning
on the wine cellar. Rub a small amount of liquid dish soap over
the adhesive with your fingers. Wipe with warm water and dry.
■Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your wine cellar. For
more information, see “Wine Cellar Safety.”
■Dispose of/recycle all packaging materials.
Clean Before Using
After you remove all of the packaging materials, clean the inside of
your wine cellar before using it. See the cleaning instructions in
“Wine Cellar Care.”
Door Closing
Door Closing
Your wine cellar has four leveling legs. If your wine cellar seems
unsteady or you want the door to close more easily, adjust the
wine cellar’s tilt using the instructions below.
1. Plug into a grounded 3 prong outlet.
2. Move the wine cellar into its final location.
3. Turn the leveling legs to the right to lower the wine cellar or
turn the leveling legs to the left to raise it. It may take several
turns of the leveling legs to adjust the tilt of the wine cellar.
NOTE: Having someone push against the top of the wine
cellar takes some weight off the leveling legs. This makes it
easier to adjust the leveling legs.
4. Open the door and check that it closes as easily as you like. If
not, tilt the wine cellar slightly more to the rear by turning both
front leveling screws to the right. It may take several more
turns, and you should turn both leveling legs the same
amount.
WARNING
Excessive Weight Hazard
Use two or more people to move and install wine cellar.
Failure to do so can result in back or other injury.
When MovingYour Wine Cellar:
Your wine cellar is heavy. When moving the wine cellar for
cleaning or service, be sure to cover the floor with
cardboard or hardboard to avoid floor damage. Always pull
the wine cellar straight out when moving it. Do not wiggle
or “walk” the wine cellar when trying to move it, as floor
damage could occur.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
WARNING
Excessive Weight Hazard
Use two or more people to move and install wine cellar.
Failure to do so can result in back or other injury.

7
WINE CELLAR USE
Normal Sounds
Your new wine cellar may make sounds that your old one didn’t
make. Because the sounds are new to you, you might be
concerned about them. Most of the new sounds are normal. Hard
surfaces, such as the flooring and surrounding structures, can
make the sounds seem louder. The following describes the kinds
of sounds and what may be making them.
■Your wine cellar is designed to run more efficiently to keep
your wine at the desired temperatures and to minimize energy
usage. The high efficiency compressor and fans may cause
your wine cellar to run longer than your old one. You may also
hear a pulsating or high-pitched sound from the compressor
or fans adjusting to optimize performance.
■Rattling noises may come from the flow of refrigerant or items
stored inside the wine cellar.
■As each cycle ends, you may hear a gurgling sound due to the
refrigerant flowing in your wine cellar.
■You may hear water running into the drain pan when the wine
cellar is defrosting.
■You may hear clicking sounds when the wine cellar starts or
stops running.
Using the Control
The control is located behind the base grille. Lift up on the door in
the center of the grille to access the control.
For your convenience, your wine cellar temperature control is
preset at the factory. When you first install your wine cellar, make
sure that the control is still preset to the mid-setting as shown.
Adjusting the Control
The mid-setting should be correct for normal usage. The control is
set correctly when the wine is as cold as you like.
If you need to adjust the temperature, wait at least 24 hours
between adjustments and then recheck the temperature.
To make the wine cellar colder, adjust the control to the next
higher setting. To make the wine cellar less cold, adjust the control
to the next lower setting.
NOTE: Adjusting the temperature control raises or lowers the
temperature in both the upper and lower zones (compartments).
Temperature Separator (Temperature Display)
The temperature separator displays the current temperatures
(Fahrenheit or Celsius) for the upper and lower zones
(compartments) of the wine cellar. To adjust the temperature
settings, see “Adjusting the Control” earlier in this section.
Recommended Zone Storing Locations
For best storing and serving temperatures for your bottle of wine,
use the wine producer's recommended temperature setting. See
the wine’s label for details. It is recommended to store wine for
short-term (few months) at 55°F (13°C).
Wine Racks
Remove and Replace the Top and Middle Racks
1. Pull the rack forward until it stops.
2. Lift up on the left-hand lever while pressing down on the right-
hand lever to release the rack. Pull the rack forward and lift it
up and out of the rack supports.
A. Dimmer
B. Upper zone display
C. Lower zone display
D. Fahrenheit/Celsius
WINES ZONES
White Wine Upper zone
Lighter Red Wine Lower zone
Red Wine Lower zone
A. Lever
Dimmer Upper Lower F
ABCD
A

8
3. Replace the rack by inserting the rack into the supports and
sliding it toward the rear of the wine cellar.
Remove and Replace the Bottom Rack
1. Lift the rack (front and back) up and pull straight out to
remove.
2. Replace the rack by pushing it straight back and over the
stop. Continue pushing the rack evenly until it is in place.
Stocking the Wine Cellar
NOTE: For optimum wine storage, place white wines at the top of
the wine cellar, light red wines in the center and red wines at the
bottom.
To stock the wine cellar
1. Start stocking the wine cellar with the bottom display rack.
2. Starting on the left-hand side, place the first bottle on the
bottom of the rack with the neck of the bottle facing the front
of the wine cellar.
3. Place the next bottle on its side with the neck of the bottle
facing the back of the wine cellar. Alternate the direction of the
bottles, in this manner, until the display rack is full.
4. Slide the bottom rack into place and pull the next rack
forward.
5. Continue stocking each remaining rack as described in the
above steps.
Lighting the Wine Cellar
The wine cellar has an interior light that comes on any time the
door is opened. You may also choose to keep the light on at all
times by pressing the left side of the switch, located next to the
temperature control, on the base grille.
NOTES:
■Leaving the light on for an extended period of time will slightly
increase the temperature of the wine cellar.
■The light is an LED which does not need to be replaced. If the
LED does not illuminate when the door is opened, call Service
to replace the light. See Assistance or Service for contact
information.
WINE CELLAR CARE
Base Grille
You must remove the base grille to access the condenser coils for
cleaning.
To remove the base grille:
1. Open the wine cellar door.
2. Using a Phillips screwdriver, remove the two screws. Push
both tabs in toward the center to release the base grille from
the wine cellar.
3. Remove the base grille.
To replace the base grille:
1. Open the wine cellar door.
2. Position the base grille so that both tabs align and the base
grille snaps into place. Replace the two screws. Tighten the
screws.
A. Tabs
B. Screws
BAA

9
Cleaning
Clean the wine cellar about once a month to avoid buildup of
odors. Wipe up spills immediately.
To clean your wine cellar:
1. Unplug wine cellar or disconnect power.
2. Remove all racks from inside the wine cellar.
3. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
■To avoid damaging wooden tines and trim pieces, wipe
them off with a clean sponge or soft cloth and warm water.
Do not use detergent or immerse the entire rack into water
when cleaning.
■Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts, interior
and door liners or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
■To help remove odors, you can wash interior walls with a
mixture of warm water and baking soda (2 tbs to 1 qt
[26 g to 0.95 L] of water).
4. Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water. Do
not use abrasive or harsh cleaners, or cleaners containing
chlorine. These can scratch or damage materials. Dry
thoroughly with a soft cloth.
NOTE: To keep your stainless steel wine cellar looking like
new and to remove minor scuffs or marks, it is suggested that
you use the manufacturer’s approved Stainless Steel Cleaner
and Polish. To order the cleaner, see “Accessories.”
IMPORTANT: This cleaner is for stainless steel parts only!
Do not allow the Stainless Steel Cleaner and Polish to come
into contact with any plastic parts such as the trim pieces,
dispenser covers or door gaskets. If unintentional contact
does occur, clean plastic part with a sponge and mild
detergent in warm water. Dry thoroughly with a soft cloth.
5. Replace the racks.
6. Clean the condenser coils regularly. They are located behind
the base grille. Coils may need to be cleaned as often as every
other month. This may help save energy.
■Remove the base grille. See “Base Grille.”
■Use a vacuum cleaner with an extended attachment to
clean the condenser coils when they are dusty or dirty.
■Replace the base grille.
7. Plug in wine cellar or reconnect power.
Vacation and Moving Care
Vacations
If you choose to turn the wine cellar off before you leave, follow
these steps.
1. Remove all wine bottles from the wine cellar.
2. Unplug the wine cellar.
3. Clean the wine cellar. See “Cleaning.”
4. Tape a rubber or wood block to the top of the door to prop it
open far enough for air to get in. This stops odor and mold
from building up.
Moving
When you are moving your wine cellar to a new home, follow
these steps to prepare it for the move.
1. Remove all wine bottles from the wine cellar.
2. Unplug the wine cellar.
3. Clean, wipe, and dry it thoroughly.
4. Take out all removable parts, wrap them well, and tape them
together so they don’t shift and rattle during the move.
5. Tape the doors shut and tape the power cord to the wine
cellar.
When you get to your new home, put everything back and refer to
the “Installation Instructions” section for preparation instructions.
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.

10
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Your wine cellar will not operate
■Is the power supply cord unplugged? Plug into a grounded
3 prong outlet.
■Has a household fuse blown, or has a circuit breaker
tripped? Replace the fuse or reset the circuit.
■Is the Wine Cellar Control turned to the OFF position? See
“Using the Control.”
The motor seems to run too much
■Is the temperature outside hotter than normal? Expect the
motor to run longer under warm conditions. At normal
temperatures, expect your motor to run about 40% to 80% of
the time. Under warmer conditions, expect it to run even more
of the time.
■Is the door opened often? Expect the motor to run longer
when this occurs. In order to conserve energy, try to get
everything you need out of the wine cellar at once, keep wine
bottles positioned label side up so that they are easy to find,
and close the door as soon as the wine is removed.
■Is the control set correctly for the surrounding conditions?
See “Using the Control.”
■Is the door closed completely? Push the door firmly shut. If
it will not shut all the way, see “The door will not close
completely” later in this section.
■Are the condenser coils dirty? This obstructs air transfer and
makes the motor work harder. Clean the condenser coils. See
“Cleaning.”
Temperature is too warm
■Is the door opened often? Be aware that the wine cellar will
warm when this occurs. In order to keep the wine cellar cool,
try to get everything you need out of the wine cellar at once,
keep wine bottles positioned label side up so that they are
easy to find, and close the door as soon as the wine is
removed.
■Is the control set correctly for the surrounding conditions?
See “Using the Control.”
■Is the base grille blocked? For best performance, do not
install the wine cellar behind a cabinet door or block the base
grille.
There is interior moisture buildup
■Is the door opened often? To avoid humidity buildup, try to
get everything you need out of the wine cellar at once, keep
wine bottles positioned label side up so that they are easy to
find, and close the door as soon as the wine is removed.
When the door is opened, humidity from the room air enters
the wine cellar. The more often the door is opened, the faster
humidity builds up, especially when the room itself is very
humid.
■Is it humid? It is normal for moisture to build up inside the
wine cellar when the air is humid.
■Is the control set correctly for the surrounding conditions?
See “Using the Control.”
The door is difficult to open
■Is the gasket dirty or sticky? Clean the gasket and the
surface that it touches. Rub a thin coat of paraffin wax on the
gasket following cleaning.
The door will not close completely
■Are the racks out of position? Put the racks back into their
correct positions. See “Wine Cellar Use” for more information.
■Is the gasket sticking? Clean the gasket and the surface that
it touches. Rub a thin coat of paraffin wax on the gasket
following cleaning.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.

11
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If you
still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you
only use factory specified replacement parts. Factory specified
replacement parts will fit right and work right because they are
made with the same precision used to build every new Jenn-Air®
appliance.
To locate factory specified replacement parts in your area, call us
or your nearest designated service center.
In the U.S.A.
Call the Jenn-Air Customer eXperience Center
toll free: 1-800-JENNAIR (1-800-536-6247).
Our consultants provide assistance with:
■Features and specifications on our full line of appliances.
■Installation information.
■Use and maintenance procedures.
■Accessory and repair parts sales.
■Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
■Referrals to local dealers, repair parts distributors, and service
companies. Jenn-Air designated service technicians are
trained to fulfill the product warranty and provide after-
warranty service, anywhere in the United States.
To locate the Jenn-Air designated service company in your area,
you can also look in your telephone directory Yellow Pages.
For further assistance
If you need further assistance, you can write to Jenn-Air with any
questions or concerns at:
Jenn-Air Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
In Canada
Call the Jenn-Air Canada Customer eXperience Centre toll free:
1-800-JENNAIR (1-800-536-6247).
Our consultants provide assistance with:
■Features and specifications on our full line of appliances.
■Use and maintenance procedures.
■Accessory and repair parts sales.
■Referrals to local dealers, repair parts distributors, and
services companies. Jenn-Air Canada designated service
technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in Canada.
For further assistance
If you need further assistance, you can write to Jenn-Air Canada
with any questions or concerns at:
Jenn-Air Canada
Customer eXperience Centre
200 – 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.

12
JENN-AIR®REFRIGERATOR WARRANTY
FIRST YEAR LIMITED WARRANTY
For one year from the date of purchase, when this major appliance is installed, operated and maintained according to instructions attached
to or furnished with the product, Jenn-Air brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter “Jenn-Air”) will pay for factory
specified replacement parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was
purchased.
SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CAVITY LINER AND SEALED REFRIGERATION SYSTEM
In the second through fifth years from the date of purchase, when this major appliance is installed, operated and maintained according to
the instructions attached to or furnished with the product, Jenn-Air brand will pay for factory specified replacement parts and repair labor
for the following components to correct non-cosmetic defects in materials and workmanship in this part that prevent function of the
refrigerator and that existed when this major appliance was purchased:
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THE LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.
Service must be provided by a designated Jenn-Air service company. This limited warranty is valid in the United States or Canada and
applies only when the major appliance is used in the country in which it was purchased. This limited warranty is effective from the date of
the original consumer purchase. Proof of original purchase date is required to obtain service under this limited warranty.
ITEMS EXCLUDED FROM WARRANTY
This limited warranty does not cover:
1. Replacement parts or repair labor if this major appliance is used for other than normal, single-family household use or when it is used in
a manner that is inconsistent to published user or operator instructions and/or installation instructions.
2. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair
house fuses, or to correct house wiring or plumbing.
3. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty
coverage.
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance
with electrical or plumbing codes, or use of products not approved by Jenn-Air.
5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage results
from defects in materials or workmanship and is reported to Jenn-Air within 30 days from the date of purchase.
6. Any food or medicine loss due to refrigerator or freezer product failures.
7. Pickup and delivery. This major appliance is intended to be repaired in your home.
8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an
authorized Jenn-Air servicer is not available.
10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with
Jenn-Air's published installation instructions.
11. Replacement parts or repair labor on major appliances with original model/serial numbers that have been removed, altered or cannot
be easily determined.
12. Discoloration, rust or oxidation of stainless steel surfaces.
The cost of repair or replacement under these excluded circumstances shall be borne by the customer.
DISCLAIMER OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do
not allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty
gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.
DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY
Jenn-Air makes no representations about the quality, durability, or need for service or repair of this major appliance other than the
representations contained in this Warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with
this major appliance, you should ask Jenn-Air or your retailer about buying an extended warranty.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.
JENN-AIR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the
exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty
gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.
If outside the 50 United States and Canada, contact your authorized Jenn-Air dealer to determine if another warranty applies.
If you think you need repair service, first see the “Troubleshooting” section of the Use & Care Guide. If you are unable to resolve the problem
after checking “Troubleshooting,” additional help can be found by checking the “Assistance or Service” section or by calling us at
1-800-JENNAIR (1-800-536-6247).4/13
■Refrigerator/freezer cavity liner if the part cracks due to defective materials or workmanship.
■Sealed Refrigeration system (includes compressor, evaporator, condenser, dryer and connecting tubing).

13
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your major appliance
to better help you obtain assistance or service if you ever need it.
You will need to know your complete model number and serial
number. You can find this information on the model and serial
number label located on the product.
Dealer name ____________________________________________________
Address_________________________________________________________
Phone number___________________________________________________
Model number___________________________________________________
Serial number ___________________________________________________
Purchase date___________________________________________________

14
SEGURIDAD DE LA BODEGA
Si no sigue las instrucciones de inmediato, usted puede
morir o sufrir una lesión grave.
Si no sigue las instrucciones, usted puede morir o sufrir
una lesión grave.
Todos los mensajes de seguridad le dirán el peligro potencial, le dirán cómo reducir las posibilidades de sufrir una lesión y lo que
puede suceder si no se siguen las instrucciones.
Su seguridad y la seguridad de los demás es muy importante.
Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico. Lea y obedezca siempre
todos los mensajes de seguridad.
ADVERTENCIA
PELIGRO
Este es el símbolo de advertencia de seguridad.
Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una lesión a
usted y a los demás.
Todos los mensajes de seguridad irán a continuación del símbolo de advertencia de seguridad y de la palabra
“PELIGRO” o “ADVERTENCIA”. Estas palabras significan:
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
ADVERTENCIA: Para reducir el riesgo de incendio, choque eléctrico, o lesiones personales al usar su bodega, siga estas
GUARDE ESTAS INSTRUCCIONES
■Conecte a un contacto de pared de conexión a tierra de
3 terminales.
■No quite la terminal de conexión a tierra.
■No use un adaptador.
■No use un cable eléctrico de extensión.
■Desconecte el suministro de energía antes de darle servicio.
■Vuelva a colocar todos los componentes y paneles antes de
hacerlo funcionar.
■Remueva las puertas de su bodega vieja.
■Use un limpiador no inflamable.
■Mantenga los materiales y vapores inflamables, tales como
gasolina, alejados de la bodega.
■Use dos o más personas para mover e instalar la bodega.
precauciones básicas:
Advertencias de la Proposición 65 del estado de California:
ADVERTENCIA: Este producto contiene una o más sustancias químicas identificadas por el estado de California como
causantes de cáncer.
ADVERTENCIA: Este producto contiene una o más sustancias químicas identificadas por el estado de California como
causantes de defectos congénitos o algún otro tipo de daños en la función reproductora.

15
Cómo deshacerse
adecuadamente de
su bodega vieja
IMPORTANTE: El atrapamiento y asfixia de niños no es un
problema del pasado. Las bodegas tiradas y abandonadas son un
peligro, aún si van a quedar ahí “por unos pocos días”. Si Ud. está
por deshacerse de su bodega vieja, por favor siga las
instrucciones que se dan a continuación para prevenir
accidentes.
Antes de descartar su vieja bodega:
■Saque la puerta.
■Deje los portabotellas en su lugar así los niños no pueden
meterse adentro con facilidad.
REQUISITOS DE INSTALACIÓN
Requisitos de ubicación
NOTAS:
■Para que la bodega quede nivelada con los armarios
inferiores, quite los zócalos y las molduras de la abertura
trasera. Vea "Medidas del producto" y "Medidas de la
abertura" más adelante en esta sección.
■No se recomienda instalar la bodega cerca de un horno, un
radiador u otra fuente de calor.
■No la instale en un lugar donde la temperatura puede ser
menor de 55 ºF (13 ºC). Para obtener un óptimo
funcionamiento, no instale la bodega detrás de la puerta de
un armario ni bloquee la rejilla de la base.
Medidas de la abertura
■Las medidas de altura indicadas consideran las patas
niveladoras extendidas a una altura mínima.
NOTA: Si las patas niveladoras están totalmente extendidas
agregue ⁵⁄₈" (15.9 mm) a las medidas de altura. Vea “Medidas
del producto.”
■Si el piso de la abertura no está nivelado con el piso de la
cocina, ponga calzas en la abertura para que quede nivelado
con el piso de la cocina.
ADVERTENCIA
Peligro de Asfixia
Remueva las puertas de su bodega vieja.
No seguir esta instrucción puede ocasionar la muerte
o daño al cerebro.
Información importante para saber acerca del desecho
de refrigerantes:
Deshágase del refrigerador siguiendo los reglamentos
federales y locales. Los refrigerantes deberán ser evacuados
por un técnico certificado en refrigeración por EPA (Agencia
de protección del medioambiente) según los procedimientos
establecidos.
ADVERTENCIA
Peligro de Explosión
Mantenga los materiales y vapores inflamables,
tales como gasolina, alejados de la bodega.
No seguir esta instrucción puede ocasionar la muerte,
explosión, o incendio.
Dimensiones fundamentales:
A. Abertura de uso general de 14¾" (37,5 cm)
B. Ancho mínimo de la abertura de 24" (60,96 cm)
¹⁄₂"
(1,3 cm)
14³⁄₄"
(37,5 cm)
24"
(60,96 cm)
min.
24" (60,96 cm) min.
34³⁄₈" (87,3 cm) min.
35" (88,9 cm) max.
A
B

16
Medidas del producto
■Las medidas de altura se muestran con las patas niveladoras
NO extendidas.
■El cable de suministro de energía es de 60" (152,4 cm) de
largo.
Vista delantera
Vista lateral (puerta abierta a 90°)
Vista superior
Requisitos eléctricos
Antes de mover la bodega a su ubicación final, es importante
asegurarse de que tiene la conexión eléctrica adecuada.
Método de conexión a tierra recomendado
Se requiere una fuente de energía eléctrica de 115 Voltios, 60 Hz.,
CA solamente y con fusibles de 15 ó 20 amperios, debidamente
conectada a tierra. Se recomienda que use un circuito separado
sólo para su bodega. Use un tomacorriente que no se pueda
apagar con un interruptor. No use un cable eléctrico de extensión.
NOTA: Antes de realizar cualquier tipo de instalación, limpieza o
de quitar un foco de luz, desenchufe la bodega o desconecte la
fuente de energía.
30¹⁄₈"
(76,6 cm) 34¹⁄₈"
(86,8 cm)
34³⁄₈"
(87,4 cm)
26¹⁄₈"
(66,4 cm)
47³⁄₄"
(121,4 cm)
*Las dimensiones incluyen el estilo de manija de la serie Euro
23⁷⁄₈"
(60,6 cm)
21⁵⁄₈"
(55,0 cm)
26" *
(66,0 cm)
ADVERTENCIA
Peligro de Choque Eléctrico
Conecte a un contacto de pared de conexión a tierra de
3 terminales.
No quite la terminal de conexión a tierra.
No use un adaptador.
No use un cable eléctrico de extensión.
No seguir estas instrucciones puede ocasionar
la muerte, incendio o choque eléctrico.

17
INSTRUCCIONES DE INSTALACIÓN
Desempaque de la bodega
Cómo quitar los materiales de empaque
■Quite los residuos de cinta y goma de las superficies antes de
encender la bodega. Frote un poco de detergente líquido para
vajillas sobre el adhesivo con los dedos. Limpie con agua tibia
y seque.
■No use instrumentos filosos, alcohol para fricciones, líquidos
inflamables o productos de limpieza abrasivos para eliminar
los restos de cinta o goma. Estos productos pueden dañar la
superficie de su bodega. Para más información, vea
“Seguridad de la bodega”.
■Deshágase de todos los materiales de embalaje o recíclelos.
Limpieza antes del uso
Una vez que usted haya quitado todos los materiales de
empaque, limpie el interior de su bodega antes de usarla. Vea las
instrucciones de limpieza en “Cuidado de su bodega”.
Cierre de la puerta
Cierre de la puerta
Su bodega tiene cuatro patas niveladoras. Si su bodega parece
inestable o usted quiere que la puerta se cierre con mayor
facilidad, ajuste la inclinación de la bodega usando las
instrucciones a continuación.
1. Conecte a un contacto de pared de conexión a tierra de
3 terminales.
2. Mueva la bodega hacia su posición final.
3. Gire las patas niveladoras hacia la derecha para bajar la
bodega o gírelas hacia la izquierda para levantarla. Puede
precisar darle varias vueltas a las patas niveladoras para
ajustar la inclinación de la bodega.
NOTA: Para quitar un poco de peso de las patas niveladoras,
haga que alguien empuje la parte superior de la bodega. Esto
facilita el ajuste de las patas niveladoras.
4. Abra la puerta y verifique para asegurarse que se cierra con la
facilidad que usted desea. Si no es así, gire ambos tornillos
niveladores delanteros hacia la derecha para inclinar
levemente la bodega más hacia atrás. Puede tomar varias
vueltas más, y usted deberá girar ambas patas niveladoras la
misma cantidad de veces.
ADVERTENCIA
Peligro de Peso Excesivo
Use dos o más personas para mover e instalar
la bodega.
No seguir esta instrucción puede ocasionar una
lesión en la espalda u otro tipo de lesiones.
Cuando mueva su bodega:
Su bodega es muy pesada. Cuando mueva la bodega para
limpiarla o darle servicio, cerciórese de cubrir el piso con
cartón o madera para evitar daños en el mismo. Al mover la
bodega, siempre tire directamente hacia afuera. No menee la
bodega de lado a lado ni la haga “caminar” cuando la trate
de mover ya que podría dañar el piso.
ADVERTENCIA
Peligro de Choque Eléctrico
Conecte a un contacto de pared de conexión a tierra de
3 terminales.
No quite la terminal de conexión a tierra.
No use un adaptador.
No use un cable eléctrico de extensión.
No seguir estas instrucciones puede ocasionar
la muerte, incendio o choque eléctrico.
ADVERTENCIA
Peligro de Peso Excesivo
Use dos o más personas para mover e instalar
la bodega.
No seguir esta instrucción puede ocasionar una
lesión en la espalda u otro tipo de lesiones.

18
USO DE LA BODEGA
Sonidos normales
Su nueva bodega puede hacer ruidos que su vieja bodega no
hacía. Como estos sonidos son nuevos para Ud., puede ser que
se preocupe. La mayoría de los sonidos nuevos son normales.
Las superficies duras tales como el piso y las estructuras
circundantes pueden hacer que los sonidos parezcan más
fuertes. A continuación se describen los tipos de sonidos y qué
puede causarlos.
■Su bodega está diseñada para funcionar con más eficiencia
para conservar el vino a la temperatura deseada y para
reducir al mínimo el uso de energía. El compresor y los
ventiladores de alta eficiencia pueden causar que su nueva
bodega funcione por períodos de tiempo más largos que su
bodega vieja. También puede escuchar un sonido pulsante o
agudo del compresor o los ventiladores que se ajustan para
un funcionamiento óptimo.
■Las vibraciones pueden producirse por el flujo de líquido
refrigerante o artículos guardados dentro de la bodega.
■Al final de cada ciclo, Ud. puede escuchar un gorgoteo
debido al flujo de líquido refrigerante en su bodega.
■Ud. puede escuchar agua corriendo hacia la bandeja
recolectora cuando la bodega se está descongelando.
■Es posible que escuche sonidos de chasquido cuando la
bodega comienza o deja de funcionar.
Uso del control
El control está ubicado detrás de la rejilla de la base. Levante por
la puerta en el centro de la rejilla para acceder al control.
Para su comodidad, el control de su bodega ha sido prefijado de
fábrica. Al instalar su bodega por primera vez, cerciórese de que
el control aún esté prefijado en el ajuste medio, como se ilustra.
Cómo ajustar los controles
El ajuste medio indicado en la sección previa debe estar correcto
para el uso normal. El control está fijado correctamente cuando el
vino está tan frío como a usted le gusta.
Si necesita ajustar la temperatura, espere por lo menos 24 horas
entre un ajuste y otro, y después vuelva a verificar la temperatura.
Para hacer que la bodega esté más fría, coloque el control en el
siguiente ajuste más alto. Para hacer que la bodega esté menos
fría, coloque el control en el siguiente ajuste más bajo.
NOTA: Al ajustar el control de temperatura, aumentará o bajará la
temperatura en las zonas (compartimientos) superior e inferior.
Separador de temperatura (Pantalla de temperatura)
El separador de temperatura muestra las temperaturas actuales
(en Fahrenheit o centígrados) para las zonas (compartimientos)
superior e inferior de la bodega. Para regular los ajustes de
temperatura, vea “Cómo ajustar los controles” anteriormente en
esta sección.
Ubicaciones recomendadas para el almacenaje en
zonas
Para que la botella de vino tenga las mejores temperaturas de
almacenamiento y para servir, use el ajuste de temperatura
recomendado por el vitivinicultor. Vea la etiqueta del vino para
obtener detalles. Se recomienda almacenar el vino a corto plazo
(unos meses) a 55°F (13°C).
Portabotellas
Para quitar y volver a colocar los portabotellas
superior y central
1. Jale el portabotellas hacia adelante hasta que se detenga.
2. Levante la lengüeta izquierda mientras presiona la lengüeta
derecha para liberar el portabotellas. Jale el portabotellas
hacia delante y levántelo fuera de los soportes del mismo.
A. Reductor de luz
B. Pantalla de la zona superior
C. Pantalla de la zona inferior
D. Fahrenheit/centígrados
VINOS ZONAS
Vino blanco Zona superior
Vino rosado Zona inferior
Vino tinto Zona inferior
A. Lengüeta
Dimmer Upper Lower F
ABCD
A

19
3. Vuelva a colocar el portabotellas insertándolo en los soportes
y deslizándolo hacia la parte posterior de la bodega.
Para quitar y volver a colocar el portabotellas inferior
1. Levante el estante (por la parte frontal y trasera) y jálelo
derecho hacia afuera para quitarlo.
2. Vuelva a colocar el portabotellas empujando derecho hacia
atrás, pasando el tope. Continúe empujando el portabotellas
derecho hacia atrás y uniformemente hasta que quede en su
lugar.
Cómo almacenar en la bodega
NOTA: Para un óptimo almacenamiento de vinos, coloque los
vinos blancos en la parte superior de la bodega, los vinos rosados
en el centro y los vinos tintos abajo.
Al almacenar en la bodega
1. Al almacenar, comience por el portabotellas inferior.
2. Empezando por el lado izquierdo, coloque la primera botella
sobre la parte inferior del portabotellas, con el cuello de la
botella mirando hacia la parte frontal de la bodega.
3. Coloque la próxima botella al costado, con el cuello de la
botella mirando hacia la parte posterior de la bodega. Alterne
de esta manera hasta llenar el portabotellas.
4. Jale hacia delante el próximo portabotellas.
5. Continúe almacenando en cada portabotella restante como
se describe en los pasos anteriores.
Cómo iluminarla bodega
La bodega tiene una luz interior que se enciende cada vez que se
abre la puerta. También puede encender la luz en cualquier
momento, presionando el lado izquierdo del interruptor que está
ubicado al lado del control de temperatura, sobre la rejilla de la
base.
NOTAS:
■Si se deja la luz encendida por mucho tiempo, aumentará
ligeramente la temperatura de la bodega.
■La luz es LED y no necesita reemplazarse. Si el LED no se
enciende cuando se abre la puerta, llame al Servicio técnico
para reemplazar el foco. Vea “Ayuda o servicio técnico” para
obtener la información de contacto.
CUIDADO DE LA BODEGA
Rejilla de la base
Debe quitar la rejilla de la base para acceder a los serpentines del
condensador y limpiarlos.
Para quitar la rejilla de la base:
1. Abra la puerta de la bodega.
2. Saque los dos tornillos con un destornillador Phillips. Empuje
ambas lengüetas hacia el centro para liberar la rejilla de la
base de la bodega.
3. Quite la rejilla de la base.
Para volver a colocar la rejilla de la base:
1. Abra la puerta de la bodega.
2. Coloque la rejilla de la base de manera que ambas lengüetas
estén alineadas y la rejilla de la base encaje en su lugar.
Vuelva a colocar los dos tornillos. Apriete los tornillos.
A. Lengüe
tas
B. Tornillo
s
BAA

20
Limpieza
Limpie la bodega más o menos una vez al mes para evitar la
acumulación de olores. Limpie los derrames de inmediato.
Cómo limpiar la bodega:
1. Desenchufe la bodega o desconecte el suministro de energía.
2. Retire todos los portabotellas del interior de la bodega.
3. Lave a mano, enjuague y seque todas las partes
desmontables y las superficies interiores meticulosamente.
Use una esponja limpia o un paño liso y un detergente suave
en agua tibia.
■Para evitar daños en las piezas del adorno de madera,
límpielas con una esponja limpia o un paño suave y agua
tibia. No use detergente ni sumerja todo el portabotellas
en agua cuando lo esté limpiando.
■No use productos de limpieza abrasivos o ásperos, como
aerosoles para ventanas, productos de limpieza para pulir,
líquidos inflamables, ceras para limpieza, detergentes
concentrados, blanqueadores o productos de limpieza
que contengan productos de petróleo en las partes de
plástico, revestimientos interiores o de la puerta o juntas.
No use toallas de papel, estropajos para fregar u otros
utensilios de limpieza ásperos. Éstos pueden rayar o
dañar los materiales.
■Para ayudar a eliminar olores, puede lavar las paredes
interiores con una mezcla de agua tibia y bicarbonato de
sodio (2 cucharadas en un cuarto de galón [26 g en
0,95 L] de agua).
4. Lave las superficies externas metálicas pintadas y de acero
inoxidable con una esponja limpia o un paño suave y
detergente delicado con agua tibia. No use productos de
limpieza abrasivos o ásperos o que contengan cloro. Éstos
pueden rayar o dañar los materiales. Seque meticulosamente
con un paño suave.
NOTA: Para mantener como nueva su bodega de acero
inoxidable y para quitar marcas o rayaduras pequeñas, se
sugiere usar el limpiador de acero inoxidable aprobado por el
fabricante. Para pedir el limpiador, vea “Accesorios”.
IMPORTANTE: ¡Este limpiador es solamente para partes de
acero inoxidable!
No permita que el limpiador de acero inoxidable entre en
contacto con ninguna parte de plástico tales como las piezas
del marco, las tapas del despachador o las juntas de la
puerta. Si se produce contacto no intencional, limpie la pieza
de plástico con una esponja y detergente suave en agua tibia.
Seque meticulosamente con un paño suave.
5. Vuelva a colocar los portabotellas.
6. Limpie los serpentines del condensador regularmente. Están
ubicados detrás de la rejilla de la base. Quizás necesite
limpiar los serpentines cada dos meses. Esto puede ayudar a
ahorrar energía.
■Quite la rejilla de la base. Vea “Rejilla de la base”.
■Use una aspiradora con extensión para limpiar los
serpentines del condensador siempre que estén sucios o
polvorientos.
■Vuelva a colocar la rejilla de la base.
7. Enchufe la bodega o reconecte el suministro de energía.
Cuidado durante las vacaciones
y mudanzas
Vacaciones
Si Ud. decide apagar la bodega antes de irse, siga estos pasos.
1. Saque todas las botellas de vino de la bodega.
2. Desenchufe la bodega.
3. Limpie la bodega. Vea “Limpieza”.
4. Fije un bloque de goma o de madera con cinta adhesiva a la
parte superior de la puerta para que quede abierta y el aire
circule. Esto evita que se formen olores y que crezcan
hongos.
Mudanza
Si Ud. muda su bodega a una casa nueva, siga los pasos a
continuación para prepararse para la mudanza.
1. Saque todas las botellas de vino de la bodega.
2. Desenchufe la bodega.
3. Límpiela, pásele un paño y séquela detalladamente.
4. Saque todas las partes desmontables, envuélvalas bien y
asegúrelas con cinta adhesiva para que no se sacudan
durante la mudanza.
5. Sostenga las puertas cerradas y el cable pegado a la carcasa
de la bodega con cinta adhesiva.
Cuando llegue a la casa nueva, ponga todo de nuevo en su lugar
y lea la sección “Instrucciones de instalación” para obtener
instrucciones de preparación.
ADVERTENCIA
Peligro de Explosión
Use un limpiador no inflamable.
No seguir esta instrucción puede ocasionar la muerte,
explosión o incendio.