Jensen Leisure Furniture LINCOLN 6523 User manual

LINCOLN BACKLESS BENCH (BL)
Hardware Checklist
LINCOLN BACKLESS BENCH (BL)
Component Checklist
2 x 50mm (2”) Bolt and Barrel
4 x 75mm (3”) Bolt and Barrel
1x 4mm Allen Key
BEFORE ASSEMBLY
How to use ttings
Bolt and Barrel
Step 1: Insert barrel and line
up slot using a screwdriver
towards bolt.
Step 2: Insert bolt through hole
and rotate clockwise to engage
thread in the barrel.
2 x End Frames
1 x Bottom Tie Rail
2 x Seat Support Rails
1 x Seat

Fit the bottom tie rail
between the side frames
using the 2 x 50mm (2”) bolt & barrel (B).
Do not fully tighten any bolts until the seat is in place.
Locate the seat support rail into the slots
inside the side frames using 4 x 75mm (3”)
bolt & barrel (D).
Leave very loose until the seat is in place.
Place on a level surface and
fully tighten all of the bolts.
Spread the end frames apart,
align the seat with the slots inside
the end frames and bring
together.
D
LINCOLN BACKLESS BENCH
Assembly Instructions