Jensen MSR3007 User manual

MSR3007 Quick Reference Guide
*Some features may not be available depending on installed factory options.
Basic Operation
Power On/Off:
Push to turn power
ON or OFF.
AUDIO MENU: With each press of the button choose from
the following AUDIO ADJUSTMENT options: BASS, TREBLE,
BALANCE (left to right), & FADER (front to back). Press and
hold to access the SYSTEM MENU.
MUTE: Press to
MUTE audio.
MODE: With each
press of the button the
radio will change
through the following
modes: TUNER (AM/FM
selected through BAND
button), *SAT, CD, AUX
and *iPOD.
RESET: Press to
RESET settings.
EQ/iX-BASS: Press to
choose one of the
predefined bass and
treble curves. Press
and hold to turn
loudness ON/OFF.
AM/FM/RBDS Tuner Controls
TUNE: Press > to tune UP
in frequency. Press < to
tune DOWN in frequency.
Press and hold to auto search.
STATION STORE BUTTONS:
Press & hold to store current channel playing.
Momentarily press to recall stored channel.
NOTE: you can store up to 18 channels
(6 channels per band FM1, FM2, FM3, AM1, AM2).
AS/PS: Press to SCAN
through currently stored
presets. Press & hold to
STORE strongest broad-
cast stations in your area.
BAND: Press to select pre-
set group FM1, FM2, FM3,
AM1, or AM2 each with 6
channel memory locations.
MUTE: Press to
MUTE audio.
CD/MP3 Player Controls*
TUNE/TRK: Press to tune
to next track. Press and
hold to FAST FORWARD
or REWIND current track
playing.
EJECT: Press to EJECT CD.
PLAY/PAUSE:
Press to PLAY or
PAUSE current audio.
INTRO SCAN: Press when
CD is playing to play each
track for 10 seconds in se-
quential order. Press again
to SELECT current song.
RPT: Press to REPEAT
current playing track.
Press again to release
function.
RDM: Press when CD is
playing to play each track
in RANDOM order. Press
again for NORMAL play.
MUTE: Press to
MUTE audio.

©Copyright 2008 ASA, LLC QRGMSR3007 - 408
Activating your SIRIUS®Subscription —
Before you can listen to Sirius Satellite Radio, you must subscribe to the service.
If a prepaid subscription came with your radio, please inform the SIRIUS operator, who will then verify and activate your subscription.
1. With the radio power ON, press the MODE button to enter Sirius Ready mode. After displaying the SIRIUS logo, the Receiver will update all the SIRIUS channels.
NOTE: Don’t push any buttons or perform any operations until updating has been completed.
2. Once updated and the SIRIUS channels are received, the display will change to “Call 1-888-539-SIRIUS to Subscribe” and will place you in SIRIUS Satellite Radio’s
Preview Channel. Channel 184 is the SIRIUS preview channel. You will not be able to tune to any other Sirius Radio channels until you activate your subscription.
3. You will need to access your Sirius ID, which is displayed on channel 000. Press the INFO button on the radio to enter Direct Tuning mode. Using the
Tune Adjust UP/DN knob, select digits 000. Press the INFO button to enter your selection. This will display your unit’s unique 12-digit SIRIUS ID Number.
4. Write the Sirius ID number down and have your credit card handy.
5. Contact SIRIUS on the Internet: https://activate.siriusradio.com/
Follow the prompts to activate your subscription. You can also call SIRIUS toll-free at: 1-888-539-SIRIUS (1-888-539-7474)
iPod® Controls*
TUNE/TRK: Press to tune
to next track. Press and
hold to FAST FORWARD
or REWIND current
track playing.
RPT: Press to
REPEAT current
playing song. Press
to release function.
RDM: Press to play
each song in RANDOM
order. Press again for
NORMAL play.
PLAY/PAUSE:
Press to PLAY or
PAUSE current audio.
BAND/SEARCH: Press
and hold to enter iPod
mode. Press again to
access PLAYLIST, ARTIST,
ALBUM, GENRE, SONG, or
COMPOSER (consecutively).
Press MODE to select
desired play.
MUTE: Press to
MUTE audio.
VOL: Press (+) or
(-) to navigate
through various list
selections. Press
MODE to select.
MUTE: Press to
MUTE audio.
SIRIUS® Radio Controls*
STATION STORE BUTTONS:
Press & hold to store current channel playing.
Momentarily press to recall stored channel.
NOTE: you can store up to 18 channels
(6 channels per band SIR1, SIR2, SIR3).
TUNER: Press >> to tune
channel UP. Press << to
tune channel DOWN. Press
and hold to fast search.
BAND: Press to select
preset group SR1, SR2, or
SR3 each with 6 channel
memory locations.
CAT: Press (+) or (-) to
change CATEGORY.
Press MODE to select.
Use TUN/TRK to select
channel chosen
CATEGORY. Press
MODE to select.