
Suggested Usage
The JeNu Ultrasonic Infuser System
increases the absorpon of acve
ingredients in skin care products which
may create a stronger effect on the skin
than you are used to. Start by using
your JeNu Infuser with MicroSphere
Gel and any skin care product for one
minute per area per day.
Different skin care products will have
different reacons with your skin.
While your skin may tolerate increased
absorpon of some products, it may
not for others.
When using any new skin care
products with the JeNu Ultrasonic
Infuser System, do not exceed usage of
more than once a day for one minute
per area to determine your skin’s
reacon. If your skin tolerates the
increased absorpon of the new
product with no negave side effects,
you may increase your usage to twice a
day for one minute per area.
If you experience any negave
reacon, disconnue use. Depending
on the area you are treang, you may
wish to use slightly less than the
recommended size amount of the
MicroSphere Gel. If you do have any
excess of the gel on your skin aer
usage, you may wipe it off with your
fingers or a gentle cloth.
Charging Your Infuser
The JeNu Infuser comes completely
charged. If the LED power light is on
and blinking it means the Infuser needs
to be recharged. There are two ways to
charge your Infuser.
Using the Wall Charger
Plug the Wall Charger into a
standard wall outlet. Place the
Infuser on the charging port with the
Infuser head poinng up.
Using the USB Charger
(sold separately)
Plug the Wall Charger into a
standard wall outlet. Insert the USB
port in the Wall Charger and place
the Infuser on the charging port of
the USB Charger.
The light ring on either charger indicates
when the Infuser is charging. When the
light ring is lit, the Infuser is charging.
Your Infuser is fully charged if the light
ring is not lit. It may take about 10
seconds for the light to come on when
you first place the Infuser on the charger.
Suggested Usage
The JeNu Ultrasonic Infuser System
increases the absorpon of acve
ingredients in skin care products which
may create a stronger effect on the skin
than you are used to. Start by using
your JeNu Infuser with MicroSphere
Gel and any skin care product for one
minute per area per day.
Different skin care products will have
different reacons with your skin.
While your skin may tolerate increased
absorpon of some products, it may
not for others.
When using any new skin care
products with the JeNu Ultrasonic
Infuser System, do not exceed usage of
more than once a day for one minute
per area to determine your skin’s
reacon. If your skin tolerates the
increased absorpon of the new
product with no negave side effects,
you may increase your usage to twice a
day for one minute per area.
If you experience any negave
reacon, disconnue use. Depending
on the area you are treang, you may
wish to use slightly less than the
recommended size amount of the
MicroSphere Gel. If you do have any
excess of the gel on your skin aer
usage, you may wipe it off with your
fingers or a gentle cloth.
Charging Your Infuser
The JeNu Infuser comes completely
charged. If the LED power light is on
and blinking it means the Infuser needs
to be recharged. There are two ways to
charge your Infuser.
Using the Wall Charger
Plug the Wall Charger into a
standard wall outlet. Place the
Infuser on the charging port with the
Infuser head poinng up.
Using the USB Charger
(sold separately)
Plug the Wall Charger into a
standard wall outlet. Insert the USB
port in the Wall Charger and place
the Infuser on the charging port of
the USB Charger.
The light ring on either charger indicates
when the Infuser is charging. When the
light ring is lit, the Infuser is charging.
Your Infuser is fully charged if the light
ring is not lit. It may take about 10
seconds for the light to come on when
you first place the Infuser on the charger.