Jergens ASG 80001 User manual

ASG, Division of Jergens, Inc.
15700 S. Waterloo Road | Cleveland, OH 44110-3898
Phone: [phone] | Fax: [phone]
Email: [e-mail] | Web: www.asg-jergens.com
TTA Torque Arm Balancer Assembly
Work Instructions
1. Remove the hook.
2. Loosen the balancer spring to minimum force, acting on the
lever.
3. Loosen the cable holder.
PAY ATTENTION TO WIRE REBOUND!

ASG, Division of Jergens, Inc.
15700 S. Waterloo Road | Cleveland, OH 44110-3898
Phone: [phone] | Fax: [phone]
Email: [e-mail] | Web: www.asg-jergens.com
TTA Torque Arm Balancer Assembly
Work Instructions
5. Fix the cable to allow safe handling
6. Remove the screw from the arm holder interface.
4. Extend the balancer wire as long as the arm length.

ASG, Division of Jergens, Inc.
15700 S. Waterloo Road | Cleveland, OH 44110-3898
Phone: [phone] | Fax: [phone]
Email: [e-mail] | Web: www.asg-jergens.com
TTA Torque Arm Balancer Assembly
Work Instructions
7. Insert the wire inside tubes until the eye reaches the end of
tubes, in the holder interface area.
8. This is how the wire eye should be inside the arm.
9. Re-insert the holder interface screw and x it. The screw
should pass through the wire eye.

ASG, Division of Jergens, Inc.
15700 S. Waterloo Road | Cleveland, OH 44110-3898
Phone: [phone] | Fax: [phone]
Email: [e-mail] | Web: www.asg-jergens.com
TTA Torque Arm Balancer Assembly
Work Instructions
10. Mount the balancer bracket.
11. Mount the balancer and bracket into the arm bracket.
12. Loosen the cable holder

ASG, Division of Jergens, Inc.
15700 S. Waterloo Road | Cleveland, OH 44110-3898
Phone: [phone] | Fax: [phone]
Email: [e-mail] | Web: www.asg-jergens.com
TTA Torque Arm Balancer Assembly
Work Instructions
14. Fix the cable holder.
Arm is now ready to be congured for tool installation.
These work instructions can be used with the following part numbers: 80001, 80002, 80003, 80004,
80005, 80006, 80007 80008, 80009, 80010, 80011, 80012, 80013, 80014, 80015, 80016, 80017, 80018
13. Adjust the balancer wire tension to eliminate any slack inside
the arm.