Jetson Safara User manual

Safara
Electric Ride-On.
A guide for your ride.
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE.
MODEL: JSAFAR-RED | JSAFAR-PNK
Designed in Brooklyn | Made in China

Jetson's top two riding rules:
Be safe. Have fun!

3
Table of Contents
Safety Warnings
What’s in the Box
Specs & Features
Initial Assembly
Assembling the Rear Wheels
Assembling the Front Wheels
Inserting the Seat
Inserting the Rear Tailstock
Inserting the Steering Wheel
Attaching the Windshield
Inserting the Rearview Mirrors
Powering the Safara
Using the Remote Control
Using the Steering Wheel
A Guide to Your Dashboard
Charging the Safara
Helmet Safety
Care & Maintenance
...............................................................................................................4
...............................................................................................................6
.............................................................................................................9
.............................................................................................................10
..............................................................................................17
.............................................................................................28
............................................................................................................34
................................................................................................39
..............................................................................................41
.................................................................................................43
...........................................................................................45
........................................................................................................47
.................................................................................................49
.................................................................................................50
......................................................................................................51
........................................................................................................52
................................................................................................................53
........................................................................................................54

4
Safety Warnings
• Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety
instructions. The user will be responsible for any loss or damage caused by improper use.
• Before each cycle of operation, the operator shall perform the preoperation checks speciied by the manufacturer: That all guards and
pads originally supplied by the manufacturer are in proper place and in serviceable condition; That the braking system is functioning
properly; That any and all axle guards, chain guards, or other covers or guards supplied by the manufacturer are in place and in
serviceable condition; That tires are in good condition, inlated properly, and have suicient tread remaining; The area that the product is
to be operated should be safe and suitable for safe operation.
• Components shall be maintained and repaired in accordance with the manufacturer’s speciications and using only the manufacturer’s
authorized replacement parts with installation performed by dealers or other skilled persons.
• Warning against recharging non-rechargeable batteries.
• Don’t allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drive train, while the
motor is running.
• This product should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction (IEC 60335-1/A2:2006).
• Unsupervised children should not play with the product (IEC 60335-1/A2:2006).
• Adult supervision is required.
• The rider should not exceed 77 lb.
• Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control, or may cause
uncontrolled operator/passenger actions or reactions.
• Never use near motor vehicles.
• Avoid sharp bumps, drainage grates, and sudden surface changes. Ride-on may suddenly stop.
• Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.
• Avoid riding around lammable gas, steam, liquid, or dust that could cause ire.
• Operators shall adhere to all of the manufacturer’s recommendations and instructions, as well as comply with all laws and ordinances:
Units without headlights shall be operated only with adequate daylight conditions of visibility, and; Owners shall be encouraged to
highlight (for conspicuity) using lighting, relectors, and for low-riding units, signal lags on lexible poles.
• Persons with the following conditions shall be cautioned not to operate: Those with heart conditions; Pregnant women; Persons with head,
back, or neck ailments, or prior surgeries to those areas of the body; and persons with any mental or physical conditions that may make
them susceptible to injury or impair their physical dexterity or mental capabilities to recognize, understand, and perform all of the safety
instructions and to be able to assume the hazards inherent in unit use.
• Do not ride at night.
• Do not ride after drinking or taking prescription medication.
• Do not carry items when riding.
• Never operate the product barefooted.
• Always wear shoes and keep shoelaces tied.
• Make sure your feet are always placed securely on the deck.
• Operators always shall use appropriate protective clothing, including but not limited to a helmet, with appropriate certiication, and any
other equipment recommended by the manufacturer: Always wear protective equipment such as helmet, knee pads, and elbow pads.
• Always give way to pedestrians.
• Be alert to things in front and far away from you.
• Do not allow distractions when riding, such as answering the phone or engaging in any other activities.
• The product cannot be ridden by more than one person.
• When you ride the product along with other riders, always keep a safe distance to avoid a collision.
• This vehicle does not have brakes or braking capability. Do not leave a child unattended during operation. Do not use in a location that
may require braking capability, as this could result in loss of control, which may result in serious injury or death.
• Replace worn or broken parts immediately.

5
• Check whether all safety labels are in place and understood before riding.
• The owner shall allow the use and operation of the unit after a demonstration that such operators can understand and operate all
components of the unit before use.
• Do not ride without proper training. Do not ride at high speeds, on uneven terrain, or on slopes. Do not perform stunts or turn abruptly.
• Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.
MODIFICATIONS
Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson
Customer Care. This will void any warranty, and can lead to malfunctions which may cause injury.
ADDITIONAL OPERATION CAUTIONS
Do not lift the product o the ground while it is on and the wheels are in motion. This can result in freely spinning wheels, which may cause
injury to yourself or others nearby. Do not jump on or o the product, and do not jump while using it. Always keep your feet firmly planted
on the foot rest while in operation. Always check the battery charge before using.
NOTICE OF COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation. Warning: Changes or modiications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
DISPOSAL OF USED BATTERY
Battery may contain hazardous substances which could endanger the environment and human health. This symbol marked on
the battery and/or packaging indicates that used battery shall not be treated as municipal waste. Batteries should be disposed of
at an appropriate collection point for recycling. By ensuring the used batteries are disposed of correctly, you will help preventing
potential negative consequences for the environment and human health. The recycling of materials will help to conserve natural resources.
For more information about recycling of used batteries, please contact your local municipality waste disposal service.
California Proposition 65
WARNING:
This productcanexpose you tochemicals includingChromium (hexavalentcompounds),whichisknowntotheState of
Californiatocausecancerandbirthdefectsorotherreproductiveharm.Formoreinformationgo to:www.P65warnings.ca.gov.

WRENCH
SCREWDRIVER
6
What’s in the Box
* ADULTS MUST ASSIST CHILDREN IN THE INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT.
NUT
(PRE-ATTACHED)
(7X)
WASHER
(PRE-ATTACHED)
(6X)
SCREWS
(16X)
BOLTS
(PRE-ATTACHED)
(2X)
HARDWARE/TOOLS INCLUDED:
1. BODY
2. SEAT
3. SEAT BACK
4. REAR TAILSTOCK
5. STEERING WHEEL
6. WINDSHIELD
7. SIDE MIRROR (2X)
8. BACKSHAFT BASE (2X)
9. GEAR BOX (2X)
10. STEERING BRACKET (A) (PRE-ATTACHED)
WITH FRONT WHEEL AXLES
11. STEERING BRACKET (B) (PRE-ATTACHED)
12. REAR AXLE
13. FRONT WHEEL (2X)
14. REAR WHEEL (DRIVE WHEEL) (2X)
15. HUB CAP (4X)
16. CHARGER
17. REMOTE CONTROL

M
S
P
7
1
2
3
9
14 16
13 15
10
11
12
4
5
6
7
17
8
PLEASE NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.

8
ONE-YEAR GENERAL LIMITED WARRANTY
All new Jetson products, excluding parts and accessories, are warranted against defects in materials and workmanship
for a period of one year from the date of original retail purchase when used in accordance with Jetson's user manuals
(refer to ridejetson.com/support).
Under this warranty, you will be able to direct your claims to Jetson even in situations where you purchased the
Jetson Product from one of our authorized retailers.
To read the full terms of our warranty, visit www.ridejetson.com/pages/warranty-policy.

9
• FAST SPEED: 3.5 MPH
• SLOW SPEED: 1.7 MILES
• MAX RANGE: 3.5 MILES
• BATTERY: RECHARGEABLE 12V, 7AH
• RUN TIME: 1-2 HOURS
• BATTERIES NEEDED FOR REMOTE CONTROL: 2 AAA (NOT INCLUDED)
• BATTERIES NEEDED FOR STEERING WHEEL: 2 AA (NOT INCLUDED)
• MOTOR: 40W × 2
• PRODUCT WEIGHT: 42 LB
• PRODUCT DIMENSIONS: 45”L × 30”W × 26”H
• TIRE SIZE: 12.5” × 4.75”
• CHARGER OUTPUT: DC12V
• CHARGE TIME: 8-12 HOURS
• MAX CLIMBING ANGLE: 15°
• WEIGHT LIMIT: 77 LB
• RECOMMENDED AGE: 3+
• NUMBER OF RIDERS: 1
Specs & Features
* IMPORTANT: ENSURE THAT CHILD IS SECURELY FASTENED BY THE SEAT BELT BEFORE RIDING.

10
1.1 Initial Assembly
• FLIP THE BODY OVER SO THAT THE BOTTOM IS FACING UPWARDS.
• RELEASE THE STEERING BRACKET (B) AT THE FRONT OF THE BODY BY CUTTING OFF THE ZIP TIES.
• UNSCREW THE NUT USING THE WRENCH ON THE CENTER HOOK.
1. Getting Started
ZIP TIE
NUT
STEERING
BRACKET B

11
• CAREFULLY REMOVE THE STEERING BRACKET (B) AND NUT AND SET ASIDE.
STEERING BRACKET B

12
BOLT
NUT
• UNSCREW THE NUTS FROM THE BOLTS.
• SET BOLTS AND NUTS ASIDE.

13
• STRAIGHTEN THE FRONT WHEEL AXLES FROM STEERING BRACKET (A).
STEERING BRACKET A

14
• PLACE THE STEERING BRACKET (B) BACK IN PLACE.
STEERING BRACKET B

15
• PLACE NUT ON CENTER HOOK AND TIGHTEN USING WRENCH.
NUT

16
• INSERT A BOLT THROUGH THE HOLES ON EACH SIDE OF THE STEERING BRACKET (B) FROM UNDERNEATH.
TWIST A NUT ONTO THE END OF EACH BOLT.
• TIGHTEN THE NUTS.
• MAKE SURE THE STEERING BRACKET (B) IS SECURELY ATTACHED.

17
1.2 Assembling the Rear Wheels
• IN THE REAR OF THE BODY, PLACE THE TWO BACKSHAFT BASES INTO THEIR CORRESPONDING HOLDER.
BACKSHAFT BASE

18
• MAKE SURE THAT THE BACKSHAFT MARKED "R" IS PLACED ON THE SIDE OF THE BODY MARKED "R" AND THAT THE
BACKSHAFT MARKED "L" IS PLACED ON THE SIDE OF THE BODY MARKED "L."
BACKSHAFT BASE