Jiffy®Steamer
Model J-4000®
Wiring
Instructions
Engineered to last.
Wiring Instructions
Insure that the power cord is unplugged from the electrical outlet before removing the bottom plate or
attempting to repair your Jiffy®Steamer. Please note, the Switch Terminal Numbers and the SwitchTerminal
Letters are marked on the actual switch.
1) Neutral wire #1 (white wire from the cord set bundle) attaches to “A” marked on the GE #ASR3282-05 rotary
power switch.
2) Positive wire #2 (black wire from cord set bundle) attaches to “B” marked on the GE #ASR3282-05 rotary
power switch.
3) Ground wire #3 (green wire from cord set bundle) attaches to the aluminum steamer housing.
4) Ground wire #4 (green wire from electrical control) attaches to the aluminum steamer housing.
5) The double white wire #5 connects from SwitchTerminal Number 4,
as follows:
• The 5A leg of the double white wire #5 connects
to the terminal pin on the right side of the
R34 electrical control, which is the one nearest
to the ground wire.
• The 5B leg of the double white wire #5 connects
to either side of the red pilot light.
6) Blue wire #6 connects SwitchTerminal Number 1
to the top side of the L-170 PREHEAT thermostat.
7) Triple yellow wire #7 connects from the bottom
side of the L-170 PREHEAT thermostat,
as follows:
• The 7A leg of the triple yellow wire #7
goes to SwitchTerminal Number 2.
• The 7B leg of the triple yellow wire #7
goes to the red pilot light.
• The 7C leg of the triple yellow wire #7
goes to the left side of the R34
electrical control.
Comments? Questions?
Jiffy®Steamer Company Hotline
1-800-J2-Jiffy
(1-800-525-4339)
Worldwide Leader in Steaming Equipment Since 1940
Jiffy Steamer Company, LLC
4462 Ken-Tenn Highway (38261) Post Office Box 869 Union City, Tennessee 38281-0869 United States of America
Phone: 1-731-885-6690 Fax: 1-731-885-6692 Web: www.jiffysteamer.com E-mail: jsinfo@jiffysteamer.com