JLG 3513PS Use and care manual

Operation & Safety
Manual
Original Instructions
Keep this manual with machine at all times.
An Oshkosh Corporation Company
Platforms for
3513PS,
4013PS,
4014PS,
4017PS
31200345
Revised
July 15, 2016

Revision Log
a31200345
Revision Log REVISION LOG
December 12, 2007 - A - Original Issue of Manual
March 5, 2008 - B - Revised pages 1-3, 9-1 and 9-2.
November 16, 2009 - C - Revised covers and page 9-2.
March 22, 2010 - D - Revised pages b, c, d, 1-1, 1-5, 2-1 thru 2-11, 3-2, 3-3, 3-4, 4-1, 4-3, 4-4,
5-1, 5-2, 5-3, 6-2, 6-3, 7-1 thru 7-6, 8-1 & 9-1.
October 8, 2013 - E - Revised covers and pages d, 2-4, 2-5, 5-3, 7-4 thru 7-7, 8-1, 9-1, 9-2 &
9-3.
July 15, 2016 - F - Revised rear cover and pages 2-4 thru 2-8, 2-11, 4-1, 4-3 & 7-2.

Read This First
b31200345
Read This First
This manual is a very important tool! Keep it with the machine at all times.
The purpose of this manual is to provide owners, users, operators, lessors, and lessees
with the precautions and operating procedures essential for the safe and proper machine
operation for its intended purpose.
Due to continuous product improvements, JLG Industries, Inc. reserves the right to make
specification changes without prior notification. Contact JLG Industries, Inc. for updated
information.
Operator Qualifications
The operator of the machine must not operate the machine until this manual has been
read, training is accomplished and operation of the machine has been completed under
the supervision of an experienced and qualified operator. Operation within the U.S.A.
requires training per OSHA 1910.178.
Operators of this equipment must possess a valid, applicable driver’s license, be in good
physical and mental condition, have normal reflexes and reaction time, good vision and
depth perception and normal hearing. Operator must not be using medication which
could impair abilities nor be under the influence of alcohol or any other intoxicant during
the work shift.
In addition, the operator must read, understand and comply with instructions contained
in the following material furnished with the material handler:
• This Operation & Safety Manual
• Telehandler Safety Manual (ANSI only)
• All instructional decals and plates
• Any optional equipment instructions furnished
The operator must also read, understand and comply with all applicable Employer,
Industry and Governmental rules, standards and regulations.
Modifications
Any modification to this machine must be approved by JLG.

Read This First
c31200345
This product must comply with all safety related bulletins. Contact JLG Industries, Inc. or
the local authorized JLG representative for information regarding safety-related bulletins
which may have been issued for this product.
JLG Industries, Inc. sends safety related bulletins to the owner of record of this machine.
Contact JLG Industries, Inc. to ensure that the current owner records are updated and
accurate.
JLG Industries, Inc. must be notified immediately in all instances where JLG products have
been involved in an accident involving bodily injury or death of personnel or when
damage has occurred to personal property or the JLG product.
FOR:
• Accident Reporting and Product Safety Publications
• Current Owner Updates
• Questions Regarding Product Applications and Safety
• Standards and Regulations Compliance Information
• Questions Regarding Product Modifications
CONTACT:
Product Safety and Reliability Department
JLG Industries, Inc.
13224 Fountainhead Plaza
Hagerstown, MD 21742
USA
or Your Local JLG Office
(Addresses on back cover)
In USA:
Toll Free: 1-877-JLG-SAFE (1-877-554-7233)
Outside USA:
Phone: [phone]
E-mail:
[e-mail]

Read This First
d31200345
Other Publications Available
For detailed machine operation procedures and safety information, please refer to the
appropriate machine Operation & Safety Manual.

Table of Contents
i31200345
TABLE OF CONTENTS
Revision Log
Read This First
Operator Qualifications ........................................................................... b
Modifications............................................................................................... b
Other Publications Available ................................................................. d
Table of Contents
Section 1 - General Safety Practices
1.1 Hazard Classification System ....................................................................1-1
Safety Alert System and Safety Signal Words...............................1-1
1.2 General Precautions .....................................................................................1-1
1.3 Operation Safety............................................................................................1-2
Electrical Hazards....................................................................................1-2
Tip Over Hazard.......................................................................................1-3
Load Falling Hazard ...............................................................................1-4
Lifting Personnel .....................................................................................1-5
Pinch Points and Crush Hazards........................................................1-6
Fall Hazard .................................................................................................1-8
Chemical Hazards ...................................................................................1-9
Section 2 - Pre-Operation and Inspection
2.1 Pre-Operation Check and Inspection.....................................................2-1
2.2 Safety Decals ...................................................................................................2-3
Console.......................................................................................................2-3
Fixed Platform..........................................................................................2-4
Extendable Platform ..............................................................................2-6
2.3 Walk-Around Inspection.............................................................................2-8
2.4 Operational Check ........................................................................................2-9
2.5 Platform Gate ............................................................................................... 2-10
2.6 Lanyard Anchorage Points...................................................................... 2-11
2.7 Platform Extension (If Equipped).......................................................... 2-12
Section 3 - Controls and Indicators
3.1 General..............................................................................................................3-1
3.2 Controls.............................................................................................................3-2
Indicator Panel.........................................................................................3-3
Boom Joystick ..........................................................................................3-4
Table of Contents

Table of Contents
ii 31200345
Section 4 - Operation
4.1 Preparing Machine for Platform Operation.........................................4-1
4.2 Platform Operation.......................................................................................4-2
Starting the Engine ................................................................................4-2
Normal Engine Operation ...................................................................4-2
Control Operation ..................................................................................4-3
Shut-Down Procedure ..........................................................................4-3
4.3 Loading and Securing for Transport ......................................................4-4
Section 5 - Platform
5.1 Approved Platforms.....................................................................................5-1
5.2 Unapproved Platforms................................................................................5-1
5.3 Telehandler/Platform Capacity ................................................................5-2
5.4 Platform Installation.....................................................................................5-3
Section 6 - Emergency Procedures
6.1 Emergency Operation .................................................................................6-1
Operator Unable to Control Machine .............................................6-1
Platform or Boom Caught Overhead...............................................6-1
6.2 Emergency Lowering Of Boom................................................................6-2
Cab Auxiliary Power System ...............................................................6-2
Platform Auxiliary Power System......................................................6-2
6.3 Incident Notification ....................................................................................6-3
Section 7 - Lubrication and Maintenance
7.1 Introduction ....................................................................................................7-1
Clothing and Safety Gear.....................................................................7-1
7.2 General Maintenance Instructions..........................................................7-1
7.3 Service and Maintenance Schedules .....................................................7-2
10, 50 & 1000 Hour Maintenance Schedule..................................7-2
7.4 Operator Maintenance Instructions.......................................................7-4
Fuel System...............................................................................................7-4
Tires .............................................................................................................7-6
Battery ........................................................................................................7-8
Section 8 - Additional Checks
8.1 General..............................................................................................................8-1
8.2 Auxiliary Power System ..............................................................................8-1

Table of Contents
iii31200345
Section 9 - Specifications
9.1 Product Specifications.................................................................................9-1
Performance .............................................................................................9-1
Dimensions ...............................................................................................9-2
Supplemental Information..................................................................9-3
Index
Inspection, Maintenance and Repair Log

Table of Contents
iv 31200345