JMC SC5C0 N4 HDMI User manual

JMC Systems Engineering AB www.jmc.se [phone] [email protected]
User Guide
Model –SC5C0 N4 HDMI
101-SC5C0N4-H

JMC Systems Engineering AB www.jmc.se [phone] [email protected]
Product Introduction
Product Brief
SC5C0 N4 HDMI is a high-quality, high-performance capture device which is specially designed for high-
definition video capture applications and live video switching. It supports up to 4 simultaneous HDMI video
inputs with PCIe(x4) connector to connect to the computers PCIe expansion slot.
Specification
3.1. Product Specification
Surveillance Series Hardware Specification
Model
SC5C0N4 HDMI
Max. FPS
1920×1200p@60/50fps in → 1920×1200p@30/25fps out
1920×1080p@60/50fps in → 1920×1080p@60/50fps out
Recording Mode
Hardware Compression, Real-Time Mode
Product photo
Dimension
167.65×104.44 ( mm ) PCIe Full Height
Interface
PCIe×4 ( Gen2 )
Video Input
4×HDMI
Display Video Format
YV12, NV12, YUY2, RGB24, RGB32
Video RAW Data Resolution
1920×1200p@30/25/24fps
1920×1080p@60/50fps
1920×1080p@30/25/24fps
1920×1080i@60/50fps
1280×720p@60/50fps
1280×1024p@60fps
1280×960p@60fps
1024×768p@60fps
800×600p@60fps
640×480p@60fps

JMC Systems Engineering AB www.jmc.se [phone] [email protected]
720×480p@60fps
720×576p@50fps
720×480i@60fps
720×576i@50fps
Recording Video Format
H.264 ( Hardware Compression )
Recording Video Resolution
1920×1200p@30/25/24fps
1920×1080p@60/50fps
1920×1080p@30/25/24fps
1920×1080i@60/50fps
1280×720p@60/50fps
1280×1024p@60fps
1280×960p@60fps
1024×768p@60fps
800×600p@60fps
640×480p@60fps
720×480p@60fps
720×576p@50fps
720×480i@60fps
720×576i@50fps
Audio Input
4×HDMI Embedded Audio
PCB Audio Pin Input: 4×Stereo Audio
Audio Format
Stereo / 16-bit / 32000 ~ 48000Hz
I/O
16
WatchDog
✓
Multiple Cards
∞
SDK
Support API : DirectShow, V4L2, FFmpeg, Gstreamer
Support Language : C++, C#, .NET, Visual Basic, Qt, Delphi
System Requirement
OS Support
Windows 7 / Windows 8 / Windows 8.1 / Windows 10
Linux 2.6.14 or Higher ( 32-bit and 64-bit )
Connection Diagram

JMC Systems Engineering AB www.jmc.se [phone] [email protected]
3.2. Packing List
Item
Amount
SC5C0N4 HDMI Capture Card
1 (piece)
User Guide
1 (piece)
Watchdog cable
0 (piece)
Hardware Installation
Before You proceed
Please note below precautions before any install/uninstall operations:
✓ALWAYS turn off the system before hardware installation/un-installation.
✓ALWAYS unplug the power cord from the wall outlet/socket before hardware installation/un-
installation.
✓ALWAYS touch a safely grounded object or metal object before touching the device.
DO NOT touch any devices before the system is fully off.
DO NOT touch any components on the device, especially ICs on the board.
Card and Driver Installation
Download driver
From
https://www.yuan.com.tw/support/download.htm
Or via link at shop.jmc.se
Step 1: Turn off the system and unplug power cord from wall outlet/socket.
Step 2: Remove the computer system case cover.
Step 3: Plug capture device into an available PCIe slot on motherboard.
Step 4: After hardware installation is completed, then install the driver.