JML PRO CERAMIC STRAIGHTENERS User manual

2

3
PRO CERAMIC STRAIGHTENERS
INSTRUCTIONS
Read all instructions carefully before using your Pro
Ceramic Straighteners
These fantastic solid ceramic straighteners glide ultra smoothly across
hair for a beautiful straight nish. The light, slimline design is great for
easy to use styling. The Pro Ceramic Straighteners heat up quickly, with
automatic temperature control and an LED which lights to indicate when
switched on. To ensure ease of use, there is over 2m of cable, and a
swivel cord.
Important Safety Note
This product should arrive in good working condition, if you experience
any problems or if you are dissatised with the product DO NOT
attempt to repair it yourself. Please contact customer services
immediately for assistance or advice. Any attempt to repair the product
yourself will invalidate the 12 month guarantee. This product comes
with an appropriate plug tted to meet UK electrical standards as
determined by the appropriate UK legislation.

4
General Safety Instructions
Always read the instructions prior to rst use.
These safety precautions should always be followed to reduce the risk of
electric shock, personal injury or re. It is important to read all of these
instructions carefully before using the product, and to save them for
future reference or new users.
• This product must only be used as intended in accordance
with the enclosed operating instructions.
• Keep this product out of the reach of children. Always make
sure that children cannot reach the appliance or any loose
cables - electrical appliances must always be stored in a
secure place, out of reach of children.
• Children should be closely supervised at all times when they
are near any electrical appliance.
• This product is not a toy and has not been designed for use by
children.
• Caution Danger of Burns: The unit, particularly the ceramic
plates become very hot during operation. The ceramic plates
also remain hot for some time after the unit is switched off.
• Burning can occur from touching heated unit parts. Use
carefully and supervise others accordingly.
• Only touch the handles when in use.
• Do not put the product down on any carpet or other non-heat
proof surface while in use, or while still hot after use.
• Where relevant keep all ventilation slots, lters, etc. uncovered
and clear of debris. Never drop or insert objects into the
openings.
• To avoid potential damage to property, never leave the
appliance alone while turned on. Switch off the power supply
or unplug from the mains socket when not in use and before
cleaning, or servicing.
• Using the improper voltage may result in damage to the
heating elements and possible injury to the user.
• Do not operate where aerosol or spray products, e.g. toiletries,
are in use.

5
• Do not use any attachments with this product. Use of any other
attachments may cause re, electric shock or injury.
• Do not use with a damaged cord or plug. Do not use if it has
been dropped, left outdoors, or dropped in water, or if it is not
working according to these instructions. A qualied electrician
must always carry out any repairs that are necessary.
• If the appliance stops unexpectedly or appears to malfunction,
switch off the power supply, unplug from the mains and stop
using immediately. Seek professional advice to rectify the fault
or make repairs.
• WARNING: To protect against electric shock, never allow the
appliance, the mains cable or plug to come into contact with
water or any other liquid.
• Do not use whilst bathing or showering. Do not place near
sinks or baths, or anywhere the unit may fall in to liquid.
• Do not use outdoors. This appliance has been designed for
domestic indoor use only. Use and store indoors.
• Never reach for any appliance that has fallen into water. Switch
off the power supply at the mains immediately and unplug.
• Do not re-use until the product has been inspected and
approved by a qualied electrician.
• Always ensure that hands are dry before operating or adjusting
any switch on the product or touching the plug and mains
supply connections. Do not handle with wet hands.
• Do not pull or carry by the cord, use the cord as a handle,
close a door on the cord, or pull the cord around sharp
edges or corners.
• Caution should be used to ensure the cord is arranged so that
it will not be pulled on, tripped over, trapped or damaged.
• Regularly check the cord and plug for any signs of damage.
• For safety reasons, a broken or damaged mains cord may
only be replaced by an equivalent lead from the
manufacturer or similarly qualied person.
• Keep the appliance and cord away from sources of heat, sharp
objects or anything that may cause damage. Never leave the
cord in contact with the hot plates.
• Let the appliance cool completely before putting it away.

6
• If the supply cord or any part of the product is damaged, it
must be replaced by the manufacturer or its service agent, or
similarly qualied person, in order to avoid hazard.
• To unplug: grasp the plug not the cord. Do not unplug by
pulling on the cord.
• Switch off at the mains socket before unplugging.
• Incorrect reassembly or repair to the appliance can cause risk
of re, electric shock or injury to persons when the appliance is
used.
• Save these instructions.
EXTRA SAFETY PRECAUTIONS
1. The unit becomes VERY HOT when in use. Take care to avoid contact
between the hot surfaces of the plates and the skin, particularly
around the face and neck.
2. Do not touch the plates when the appliance is switched on or just
after it has been turned off.
ALLOW AT LEAST 30 MINUTES TO COOL DOWN
BEFORE STORING AWAY.
3. The appliance should NEVER be stored whilst hot or while still
connected to the mains. Always ensure the appliance is switched
off at the mains, unplugged from the mains and it has cooled down
completely before storing.
4. Never wrap the mains cord around the plates. Do not hang up by the
power cord.
5. If the plates are damaged or broken then do not use the appliance.
6. PLEASE ENSURE THE APPLIANCE IS UNPLUGGED AFTER USE.

7
Controls and Features
• Solid Ceramic Plates.
• Fast Heating – ready to use in seconds.
• Power Indicator.
• High Operating Temperature.
• Automatic Temperature Control.
• Swivel Cord.
Benets
• The solid ceramic plates create silky smooth hair.
• Help prevent the build up of static electricity in the hair.
• Suitable for all hair lengths.
• Temperature controlled for consistent heat delivery.
• Sleek and lightweight design.
Swivel Cord
Ceramic Plates
Power Indicator

8
Instructions for Use
1. Fully unwind the mains cable.
2. Connect the appliance just before it is required for use (30-40
seconds), as the plates heat up very fast. Maximum temperature
(205ºC) is reached after 240 seconds.
3. Only connect the appliance to a properly installed mains socket
– 220-240 Volts- 50Hz.
4. For straightening the hair, take a section no more than 2 to 3 inches
wide and about  inch thick. Place the hair between the 2 at plates
and close them tight. Slide the plates as close as possible to the
scalp without touching it. (DO NOT TOUCH THE SCALP)
5. Hair straightening spray or serum can be used to enhance your hairs
shine.
6. Hold the plates tight (by pressing the handles together). Hold for a
2-3 seconds and slide the unit away from the head towards the ends
of the hair.
7. DO NOT HOLD THE HAIR BETWEEN THE PLATES FOR ANY MORE
THAN 2-3 SECONDS.
8. When one section of hair has been treated, move to another.
9. Please unplug after use and allow to cool before storing.
Cleaning and Maintenance
• The appliance must be switched off and unplugged from the
electricity supply before cleaning.
• Do not touch the ceramic plates for at least 30 minutes after turning
off. Wipe with a damp cloth to clean the ceramic plates.
• Let the appliance cool down before touching or cleaning the body.
• Clean the body with a damp cloth.
• Do not use harsh detergents, abrasives, solvents or cleaners. Never
immerse in water to clean.
• Do not repair or replace the mains cable on the appliance yourself–
always use an authorised representative or qualied electrician.

9
Disposal and the Environment
If your electrical appliance requires replacement or is of no further use,
please think of protecting the environment. Contact you local authority
for advice as many have facilities for environmentally safe disposal.
Connection to Power
The unit is tted with a standard UK mains 3 pin plug.
If the mains lead gets damaged it must be replaced by a qualied
electrician. If you have to change the plug because the standard plug is
damaged or is not suitable for your mains socket, then follow carefully
the following wiring instructions.
If the plug is cut off, remove the fuse from the severed plug and dispose
of it safely, as insertion into a mains supply socket would be dangerous.

10
Mains plug wiring
As the colour of the wires in the mains lead may not correspond with
the coloured markings identifying terminals in your plug, proceed as
follows:
• The wire that is coloured BROWN or RED is connected
to the terminal that is marked with the letter “L”.
• The wire that is coloured BLUE or BLACK is connected to the
terminal that is marked with the letter “N”.
• No connection is made to the earth terminal which is marked “E”
or , coloured GREEN or GREEN and YELLOW.
Plug Fuse
If a 13Amp (BS 1363 type) plug is used then a 13 Amp (BS 1362 type)
fuse must be tted.
 






