JMQ A6X User manual

A6X Treadmill
Instruction Manual
Please read this manual carefully before using the
product and keep it.

1
1. Catalogue
Thanks for choosing this home electric treadmill, our products
will improve your health, the more familiar you are with your treadmill,
You will find it easy to use, so please read carefully this user manual，
before using the new treadmill.
All parts of the machine are made of high-quality materials and
have passedseries inspection and testing to ensure maximum
Number
Content
1
Catalog
2
Safety instructions
3
Package specifications
4
Assembly specifications
5
Electric control instructions
6
Maintenance instructions
7
Failures and trouble shooting
8
Warranty terms
9
Exercise guidelines
10
Warm exercise

2
product quality. Refer to this manual will guide you assemble , use
and maintain thistreadmill.
Thank you for using!
2. SAFE USE INSTRUCTIONS
We considered many safety problems when design and
manufacture this treadmill, to ensure your safety, please read all
contents of this manual carefully before use.We do not bear the
consequences of any abnormal operation.
RISK
B、Do not use the heart rate device together with other wireless heart
rate devices, or it can cause electrical interference.
WARNING
3. Please follow the instructions below to avoid
any hurt to you or others.
1.Before using the machine, make sure that the machine is fully
grounded to avoid accidents and dangers.
2. While running, please clamp the safety lock(red) to an appropriate
position of your clothes, If any unsuspected situation happened, it’ll

3
dropped off immediately to stop the machine
3.a. Please refer to your health care doctor’s opinion before
exercising.
b. Please wear comfortable sportswear when exercising, don’t
wear shoes with soft sole,or shoe shavings will be involved into
motor and control system, and cause operating malfunction.
c. Keep the room clean and tidy, avoid dirts being absorbed into
the treadmill, which will cause operating malfunction.
d. User weight should not exceed 100kg.
4. This product is for one person use only when it is running. To
avoid any accidents, please do not let children or pets play around to
avoid accidents.
5. Minimum spacing requirements for placing the treadmill in the
home, no less than 100cm respectively for front and both sides, no
less than 200cm for rear.
6. Please do not use this treadmill if power line broken.
7. If the treadmill is damaged or broken, please do not use and
contact for warranty.
8.Please do not touch any moving parts when the treadmill is
running, never press or stuff any objects into the treadmill.

4
9.This machine is suitable for indoor use, please do not use
outdoors or in the gym.
10. Place the treadmill on clean and smooth floor, keep it in good
ventilation condition, ensure the unit ventilated. Make sure there are
no sharp objects nearby. Do not use it near water or fire sources.
11. Please use the handrail when getting on or getting off from the
machine. Do not get off from the treadmill when the walking machine
is not stopped completely.If any accident happens, you must pull off
the safety lock,then the treadmill will stop immediately.
12. Do not use this machine when you are using oxygen equipment
or or using spraynear it.
13. To make sure the treadmill running properly, please do not install
any accessories which are not supplied by the original factory.
14. Must keep all parts of the treadmill installed firmly.
15. Please turn off and unplug the power after using the treadmill.
4. Package List
Numbe
r
Component
Single
function
Multi-
function

5
1
Frame
■
■
2
Manual
■
■
3
Screen
■
■
4
Screwpack
Fourth page icon
■
■
5
Connecting
rod
■
6
Massage
bracket
■
7
Massage
machine
■
8
High elastic
foam
■
Single function screw pack
说明书

6
Multi function screw pack
4. Installa
tion

7
process
Step 1:Lift the frame ou of the carton and open the cable tie of the
strapping frame.
Step 2:Expand the frame: When expand, please pull out the pull pin
on the column of N, and hold the frame on the ground with the other
hand, and lock it with the knob marked by D#M8*45 to prevent
waggle.
Step 3:Assembly

8
of the electronic meter stand: first fold the electronic meter stand in
the direction of the arrow, and then fix the electronic meter stand on
the column with F#M8*15 screws (2 pieces) and G#M8 pads (2
pieces).
Step 4:a. Electronic meter screen assembly: first connect the signal
lines of the electronic meter, and then put the panel on the electronic
meter as indicated by the direction of the arrow, and then fix it with
E#M5*40 screws (2 pieces).
The red part indicated by the arrow is anti-warping device.In
use,adjust the device according to your own weight to prevent the
base from being upturned.
F
G

9
Step 5:Product folding:When you need to carry or use this product
for long time,fold it as shown below:Hold the back end of the running
platform and slowly raise the running platform in the direction of the
arrow until the running platform is substantially parallel with the
column.Use another hand to pull the knob outward to ensure that the
knob iron shaft is inserted into the side of the running platform inside
the hole.
The following steps are for the installation of multi-function
accessories
E

10
1. The 5# massage bracket is fixed on the column with F# screw
M8*15 and G# flat pad M8, and then fixed with D# massage stand
with G# screw M8*45, I# flat pad M8 and H# anti-loose nut M8 On
the 6# massage stand.
2. Respectively, put the 8# sponge jacket on the round tube of the 6#
massage stand.
3. Fix the 7# massage head on the flat plate at the upper end of the
6# massage stand with its own screws, flat pad and elastic pad.
5. Electronic control operation
FGFG
5
6
DG
H
7
8

11
Boot start: Normal start after 3 seconds countdown.
The number of programs : P1~P12 automatic programs.
Safety lock function
Unplug the safety lock and immediately display the “SAFE” treadmill
to stop quickly. When the safety lock is placed, the electronic watch
will display for 2 seconds and the data will be cleared.
Key Function
Start button:
“START” is the start button. When the treadmill is stopped, press the
start button, the speed displays “1.0”, and the treadmill starts.
stop button:
“STOP” is the stop button. When the treadmill is running, press the
stop button, all data is cleared, and the treadmill slowly stops.

12
Program key
"PROGAM" is the program key. In the standby state, press this
button to cycle through the manual mode to the automatic program
P1 –P12; the manual mode is the system default operation mode,
the manual mode default speed is 1.0, and the maximum running
speed is 12.8.
Mode key
“MODE” is the mode button. In the standby mode, press this
button to cycle through three different countdown modes of
operation from time, distance and calories. When selecting various
modes, you can use the speed plus or minus button to set the
relevant countdown value. After the setting is completed, press the
“START” button to start the treadmill.
Speed button
“SPEED+” and “SPEED -” are speed addition and subtraction keys:
they can be used to adjust the speed after the treadmill is started,
stepping 0.1Km/time, “SPEED+” and “SPEED -” can be used to
parameterize the treadmill to adjust the set value.
Display function
a. Speed display: Displays the current running speed value.

13
b. Time display: Shows the running time in manual mode or the
running time countdown in mode and program.
c. Distance display: Displays the distance total in manual and
program mode or the inverse of the mode running distance.
d. Calorie display: Shows the calorie accumulation during exercise
in manual and program mode or the calorie count in mode run.
Function display range
TIME：0:00 –99:59(MIN)
DISTANCE: 0.00 –99(KM)
CALORIES: 0.0 –990 (KC)
SPEED:1 –12.8KM/H
Automatic program
The default running time is 10 minutes. After the program is
selected, the running time is set. The program segment of each
program is divided into 10 segments, and the running time of each
program block is evenly distributed. The motor stops the meter clear
after the running time is completed. The following is a motion chart
of 12 programs.

14
Program speed form
Time slot
Program
Set time / 10 = run time of each time slot
1
2
3
4
5
6
7
8
9
1
0
P1
SPEED
2
3
1
4
3
2
1
3
3
1
P2
SPEED
3
4
5
6
5
4
3
4
4
2
P3
SPEED
2
3
4
5
4
3
4
3
4
2
P4
SPEED
3
4
5
6
5
7
5
4
3
3
P5
SPEED
3
5
7
6
5
8
5
4
3
2
P6
SPEED
4
6
8
10
12
8
9
6
4
2
P7
SPEED
5
6
7
5
6
8
6
5
4
2
P8
SPEED
5
6
5
4
3
2
3
5
4
2
P9
SPEED
5
6
5
4
2
2
3
5
4
2
P10
SPEED
2
5
7
5
8
6
5
2
4
3
P11
SPEED
2
5
6
7
8
9
10
5
3
2
P12
SPEED
2
3
5
6
8
6
9
6
5
3

15
Parameter setting in 3 modes
a. The countdown time setting is initially 30:00 minutes, the setting
range is 5:00---90:00 minutes, and the step is 1:00.
b. The calorie setting of the calorie count is: 100 kcal, the setting
range is 20---990 kcal, step 10.
c. The initial distance of the countdown distance setting is 5
kilometers, the setting range is 0.5---99.0 kilometers, and the step is
0.1.
d. The cycle switching sequence is: manual, time, distance, calories
Other
When a countdown parameter is run, the display shows END, and a
0.5 second alarm every 2 seconds until the treadmill stops, then
stops the alarm and then returns to the manual mode
state.Countdown time, countdown calorie, and countdown distance
can only be set to one of them. Run the last setting, the set
parameters are counted down, and the other displays positive count.
※Bluetooth music operates as follows:
Turn on the treadmill power switch, manually search for the
Bluetooth device (JF-BTMP3) with the mobile phone, find the

16
Bluetooth device to click and connect.After the connection is
successful, the music on the mobile phone can be transmitted to the
power amplifier device on the treadmill through Bluetooth, and
operated on the computer. Lower tone, volume addition and
subtraction, etc.
6. Maintenance guide
Proper maintenance keeps your treadmill in top condition;
incorrect maintenance can hurt or shorten the life of your treadmill.
WARNING: Always unplug the treadmill's power cord before
cleaning or maintaining the product!
1. Regularly remove dust to keep the parts clean,
2.After using the treadmill, wipe the instrument and other parts of
the sweat and debris with a clean towel or cloth. Be careful not to
splash water on the electrical components and under the running
belt.
3. Place your treadmill in a clean, dry environment, make sure the
power is off, and unplug it.
4. In order to facilitate the movement, the treadmill is equipped with
wheels installed. Please confirm that the power is disconnected and

17
the body is folded before moving.
5.Always check and lock all parts of the treadmill; parts of the
damaged ring must be replaced immediately.
6. In order to better maintain and extend the life of the treadmill, it is
recommended that you rest the treadmill for 10 minutes after 30
minutes of continuous use.
7. The running belt has been adjusted at the factory, but after use,
the running belt will be stretched, will deviate from the center
position and cause the running belt friction strip and the rear cover to
be damaged. It is normal for the running belt to be stretched during
use. After using it for a period of time, if you are running with a
treadmill and it is slippery or not smooth, you can adjust the
tightness of the running belt to improve.
Running belt tightening adjustment
If the running belt is too loose, please insert the supplied hex
wrench into the adjusting hole of the left footstep of the treadmill,
turn it 1/4 turn clockwise, and then adjust the right foot to rotate

18
clockwise. 1/4 laps, note that the left and right must be adjusted
synchronously, so that the running belt can be tightened and the
running belt will not deviate from the center point. If the running belt
is too tight, the left and right synchronization will be adjusted
counterclockwise.
Note: The running belt cannot be adjusted too tightly. This will
break the running belt, increase the pressure of the front/rear drum,
cause damage to the roller bearing, etc., abnormal noise or other
problems, and only need to adjust to the running belt without
slipping.
Running belt alignment adjustment
When you use the treadmill, the pressure on the two belts is not
the same when running, and the pressure on the running belt is
unbalanced, causing the running belt to deviate from the center. This
deviation is normal and it automatically returns to the center when
no one is running on the running belt. If you don't get back to the
center, you need to run back to the center.Run the treadmill at no
load, adjust the speed to the sixth gear, and observe the distance
from the running belt to the left and right side bars:
● If it is to the left, use a hex wrench to turn the left screw 1/4 turn

19
clockwise;
● If it is biased to the right, use a hex wrench to turn the right screw
1/4 turn clockwise;
● If the running belt is still not in the middle, repeat the above action
until it is adjusted to the middle.
After adjusting the running belt to the middle, adjust the speed to the
sixth gear, and observe the deviation of the running belt and the
smooth running condition. If there is any deviation, repeat the
adjustment step.
Caveat! Do not overtighten the rollers! This will result in permanent
damage to the bearing!
8. lubricating oil
The treadmill is lubricated at the factory, but the treadmill's lubricity is
often checked to help keep the treadmill in optimal use. The
treadmill must be lubricated after one year of use or 100 hours of
operation.
After 30 hours or 30 days of use, when the treadmill is at rest, pull up
the running belt from the side and reach the surface of the running
platform as far as possible. If you feel the lubricant, you do not need
to add lubricating oil; if you touch the surface There is a strong