Joape EcoJet BOB User manual

User’s Manual
High Quality Product

USER'S MANUAL
Joape is a green technology company with over 30 years experience in the
acclimatizing equipment industry in Brazil. Their focus is on the development of new
technologies and products offering high quality solutions, while respecting and
preserving the environment.
PLEASE READ & SAVE THIS USER'S MANUAL WITH INSTRUCTIONS.
For your personal safety and to maximize the performance of your EcoJet by Joape
Cooling Solution Fan, please read this User's Manual carefully before using your
equipment. If you have any questions, please contact SouthBee Customer Assistance
by emailing [email protected] or at 305-713-4424during work hours, Monday
to Friday from 9-5pm.
EcoJet by Joape offers a variety of "Brazilian Cool" misting fans in Residential,
Commercial and Industrial product lines in a range of colors and sizes.
Your new misting fan will be a great addition to your home, business or work
environment, and will keep you comfortable throughout the year. Under the proper
conditions your BOB fan will provide a cooling "cloud" of from 200 up to 400 square
feet.
Congratulations on your purchase of a EcoJet by Joape BOB Misting Fan!
"Green" Footnote: All of the packaging material is recyclable, please recycle.
2
Distributor JOAPE USA
[phone]
[email protected]
www.southbee.com
Southbee, Corp – Exclusive Distributor Joape
th
14100 NW 60 Ave
Miami Lakes, FL 33014
Phone: [phone]
Email: [email protected]

IMPORTANT SAFETY INSTRUCTIONS
WARNING
ŸTo prevent damage to the water pump do not leave fan running without water in
the reservoir.
ŸThis fan has a polarized plug (one blade wider than the other), which is intended
to fit into a polarized electrical outlet only one way.
ŸAlways place EcoJet by Joape BOB fan on a stable, level surface when operating,
do not place on surface too small which could allow fan to tip or fall, causing
damage to people or property.
ŸDo not leave children unattended within reach while the equipment is in use.
ŸDo not place fan near an open flame, cooking or heating appliance.
To avoid risks, please observe the precautions mentioned below:
ŸEvaporative systems demand the exchange of air, either operate the equipment
with the AC is turned on or where there is air circulating
ŸChildren should not be allowed to operate EcoJet by Joape BOB Cooling System.
ŸAlso to protect against electrical shock, do not immerse unit, plug or cord in
water or spray with liquids.
ŸTo avoid electrical shock, never connect or disconnect the plug with wet hands.
ŸAlways unplug fan when not in use, moving to a new location or when cleaning.
ŸNever yank on the power cord to unplug the fan from the electrical outlet, to
disconnect grip the plug and pull from the outlet.
ŸRead all the instructions and the warranty terms before using your EcoJet by
Joape BOB Cooling System.
ŸConfirm the EcoJet by Joape BOB voltage of 110 volts corresponds to the local
voltage(110v).
ŸDo not hang EcoJet by Joape BOB Cooling System on a wall or ceiling.
ŸNever add flammable liquids to the water reservoir.
ŸAvoid any contact with moving parts, do not place objects on or in the fan.
ŸEcoJet by Joape BOB was designed for household or small environment use, it is
not intended for large commercial or industrial use.
3

4
• Hydrates the air with atomized water
• Helps eliminating gases and odors
• Eliminates static electricity
• Reduces the temperature with its evaporative system
• Improves performance of air-conditioning units
• Cleanses the air of dust particles
• Dilutes concentration of organic solvents and ammonia
• Electricity savings due to its low electricity consumption
Components
13 - Water Pump
12 - Water Reservoir Cap
10 - Back Grid
11 - Grid Cap
9 - Propeller Motor
4 - Motor Shaft
3 - Collecting Cap
5 - Disk Motor
8 - Water Level Indicator
7 - On/Off Button
1 - Finishing Cone
2 - Disk
6 - Protecting Cover
Packaging List
• 1 EcoJet by Joape BOB Misting
Fan
• 1 User's Manual
Technical Details
Air Flow: 353 cfm
Noise Level: 60dB
Consumption: 128W/h
Voltage: 110V
Speed: Dual-speed fan
Water Supply: 2 gallons internal Water Reservoir
Dimensions: 19"x10"x21"
Weight: 15 lb
321 5
4
1
6
7
8
12
13
9 10 11
EcoJet by Joape BOB Cooling System Benefits

WARNING
5
If the electrical cord for power supply gets damaged, it can ONLY be replaced by
the manufacturer or authorized agent.
For maintenance, contact customer service at: [email protected] or
www.southbee.com
IMPORTANT WARNINGS
• The centrifugal disk spins at 3,500 RPM, do not place your hand or any other
object on it when the fan is operating.
• Be careful not to spill water on the electrical part of equipment.
• NEVER turn you equipment ON without water in the reservoir.
• Do not add dirty water to the water reservoir.
• Do not clean EcoJet by Joape BOB with harsh chemicals or abrasive products.
• ALWAYS remove the water from the reservoir to store your EcoJet by Joape BOB.
• Cleaning is essential for a proper performance of the equipment.
• Do not use the equipment with damaged parts; always use original ex-factory parts.
• Adjust the mist according to the conditions of your environment.
• Users will be deemed responsible if they add flavoring agents, as well as any other
chemical, to the water.
• In case any gas generator is added, the device's manufacturer will be deemed NOT
responsible.
• Protect from rain and weather when using outdoors.
• If the device gets rain and/or wet please wait until it is completely dry to run again.
3 - Add up to two gallons of water to the reservoir (picture 1).
6 - Use the mist adjustment knob to regulate the mist flow according to the
environment needs. (picture 3)
5 - Turn the On/Off knob to the ON position. (picture 2).
4 - Connect the plug into a 110V electrical outlet.
2 - Place the equipment on a flat and clean surface at least 32" off the ground.
1 - Remove the equipment from the packaging. Make sure no packing materials are
in the fan area.
Installation
23
Maximum level
1
Note: When used indoors, the mist adjustment should be set on a very fine mist.

6
45
A
C
B
submersible water pump inside the reservoir.
1 - Disconnect the equipment from the electrical outlet
4 - In areas with hard water, it may be necessary to occasionally clean the
2 - Use liquid detergent and a brush to clean the equipment.
3 - When the equipment is not used for more than 7 days,
the reservoir must be emptied, and cleaned, then run all water through once.
In areas with hard water, it may be necessary to occasionally clean the pump. Also in
areas with hardwater, at the end of the season or if not used for long periods, follow
this recommended cleaning procedure:
Cleaning Instructions
6 - Rinse all parts and reassemble the pump.
1 - Remove the pump from the water reservoir (picture 4).
4 - Remove the propeller from the engine (picture 5/item "C").
5 - Clean all pump parts with water and neutral liquid soap.
3 - Remove the protective cover from the rotor (picture 5/item "B").
2 - Remove the front cover of the water inlet (picture 5/item "A").
Cleaning the Water Pump

Dripping
Mist valve is excessively open
for existing conditions.
Dirt in the reservoir.
Use the mist valve to
reduce the mist.
Perform the cleaning
procedures.
Troubleshooting
PROBLEM
Fan does not
turn on
PROBABLE CAUSE
The On/Off button is not
in ON position.
Not plugged to the
electrical outlet.
No electrical power on
the outlet.
SOLUTION
Turn the button to ON
position.
Make sure fan is plugged
into live electrical outlet.
Press reset button on GFCI
plug.
Not Misting
No water in the water
reservoir.
The mist adjustment valve
is closed.
Defective/Dirty water pump
Pump is not well connected
or loose.
Air in the water line.
GFI electrical outlet is
“tripping”with the use of fan.
On/Off Switch is not working.
White plastic spinning disc
is damaged.
Add water to the reservoir.
Open the mist valve.
Clean the water pump.
Reconnect the pump
tubing to the mist valve
connector as it may have
disconnected during
transportation.
Verify if there's no air
inside the water tubing
that is preventing water to
flow. Turn the equipment
on and off repeatedly and/or
pump the air out to
allow water flowing.
Make sure the outlet and
its power grid has enough
power capacity to feed the
fan.
Contact EcoJet customer
service for a new switch.
Contact EcoJet customer
service for a new disc.
7

1. All returns must be handled by the retailer your fan was purchased from. Call them
directly with your purchase informaon.
1. Customers needing replacement parts for fans over 1 year old from date of purchase
should contact EcoJet directly at the contact info provided below.
Retail Sales Returns
Parts
EcoJet fans and pumps need to be rounely cleaned per user manual instrucons to work
properly and not void the warranty.
All Ecojet by Joape products come with a limited guarantee against defects in materials and
workmanship for a period of one (1) year from date of purchase.
EcoJet
EcoJet
EcoJet
EcoJet
EcoJet
EcoJet
EcoJet
EcoJet
EcoJet
Customer will contact distributor directly.
8