JobSmart 1355587 User manual

Model #
1355587
3/8 IN. x 50 FT.
MANUAL AIR
HOSE REEL
WITH PVC HOSE
WARNING: BEFORE USE, READ AND UNDERSTAND OPERATOR'S MANUAL. Improper operation or maintenance of this product
could result in serious injury and property damage. Read and understand all warnings and operation instructions before using this
equipment. When using air tools, basic safety precautions should always be followed to reduce the risk of personal injury.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer,
and Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
WARNING: Contains lead. May be harmful if eaten or chewed. May generate dust containing lead. Keep out of the reach of children.

2
Safety Information
WORK AREA SAFETY
□Keep work area clean. Never operate the product near
ammable substances like gasoline, naphtha, cleaning solvents,
etc. Work in a clean, well-ventilated area free of combustible
materials. Cluttered areas invite injuries.
□Never use oxygen, carbon dioxide, combustible gases or any
other bottled gases as an air source for the tool. Such gases are
capable of explosion and serious injury to persons.
□Observe work area conditions. Do not expose to rain. Keep work
area well lighted.
□Disconnect the tool from the air source before making any
adjustments, changing accessories, or storing the tool. Such
preventative safety measures reduce the risk of starting the tool
unintentionally.
□Store idle equipment. When not in use, the product must be
stored in a dry location to inhibit rust. Always lock up tools and
keep out of reach of children.
PERSONAL SAFETY
□Keep children away. Children must never be allowed in the work
area. Do not let them handle machines, tools, extension cords, or
air hoses.
□Dress properly. Do not wear loose clothing or jewellery as they
can be caught in moving parts. Protective, electrically non-
conductive clothes and non-skid footwear are recommended
when working. Wear restrictive hair covering to contain long
hair.
□Do not overreach. Keep proper footing and balance at all times;
this enables better control of the tool in unexpected situations.
□Protect your eyes by wearing safety glasses or a face shield
when using this product.
WARNING: Read all safety warnings and instructions
before using this tool. Failure to follow the warnings and
instructions may result in personal injury and property
damage. Save all warnings and instructions for future
reference.
WARNING: Always disconnect the hose reel from air
source after operation.
Always disconnect air tool attached to the hose reel from
air supply before making any adjustments and changing
accessories.
Follow all safety precautions whenever diagnosing or
servicing the hose reel. Disconnect air supply before
service.
The warnings, precautions, and instructions discussed in
this instruction manual cannot cover all possible conditions
and situations that may occur. It must be understood by the
operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by
the operator.
CAUTION: This product contains chemicals known to the
state of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
CAUTION: Keep hose away from sharp edges. Check
hose for wear before each use.

3
Safety Information (continued)
AIR COMPRESSOR AND AIR HOSE REEL SAFETY
□Maintain the product with care. Inspect hose periodically and, if
damaged, have it repaired by an authorized technician.
□Install an in-line shutoff valve to allow immediate control over
the air supply in an emergency, even if a hose is ruptured.
□Use the right tool for the job. Do not attempt to force a small tool
or attachment to do the work of a larger industrial tool. There are
certain applications for which this product was designed. Do not
modify this product and do not use this product for a purpose for
which it was not intended.
□Stay alert. Watch what you are doing. Use common sense. Do
not operate any tool when you are tired.
□Check for damaged parts. Before using any tool, any part that
appears damaged should be carefully checked to determine that
it will operate properly and perform its intended function. Check
for alignment and binding of moving parts, any broken parts, and
any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a
qualied technician.
□Replacement parts and accessories. When servicing, only use
identical replacement parts. Use of any other parts will void
the warranty. Only use accessories intended for use with this
product.
WARNING: Do not exceed maximum pressure of 300 psi.
Over pressurizing the tool may cause bursting, abnormal
operation, breakage of the tool or serious injury to persons.
Use compressed air regulated to a maximum pressure at
or below the rated pressure of any attachments to this
product.
WARNING: Do not operate tool under the inuence of
alcohol or drugs. Read warning labels on prescriptions to
determine if your judgment or reexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
WARNING: Use proper size and type of air connection
hose. If an air connection hose is required, it must be of the
proper size and type to supply the correct current to the
tool without heating up. Check your compressor manual for
extension cord information.
WARNING: Make sure that the product is securely seated
on at ground before pressurizing.
WARNING: Do not release hose. Rapidly retracting hose
could cause injury and property damage. Maintain control of
hose as it retracts.
WARNING: Do not move and/or carry the product by air
hose. Use the carry handle for movement.

4
Pre-Installation
SPECIFICATIONS
Reel Style Reel Capacity
Maximum
Operation
Pressure
Air inlet Air outlet
Manual 50 FT x 3/8 in. 300 PSI
1/4 in. Quick-
connect plug
(Industrial type)
1/4 in. Quick-
connect coupler
(Universal type)
PACKAGE CONTENTS
E
A
B
C
D
Part Description Quantity
A Manual Air Hose Reel & Hose 1
B Reel handle 1
C Spacer 1
D Screw 1
E Hex Key 1

5
Installation
This product is already assembled before it leaves the factory. Just
mount the reel handle to the reel drum before opeartion.
1 Mounting the reel handle to the reel
drum
□Unpack the unit package and nd the reel handle (B), spacer
(C), screw (D) and hex key (E).
□Apply the reel handle (B) to the reel drum and x with the
spacer (C) and screw (D) by using the provided hex key (E).
□Make sure that the reel handle (B) is mounted tight in
position.
2 Seating the hose reel on proper location
□Have the unit securely seated on at ground as near to the air source as possible.
□It is not recommended that the air hose is extended before operation.
Operation
1 Unlocking the reel drum
□Push the lock plate (1) downward to unlock the reel drum (2). 2 Extending the air hose □Extend the air hose (3) to the desired length by holding the
carry handle (4).
1
2
4
3
E
B
C
D

6
Operation (continued)
3 Locking the reel drum
□Push the lock plate (1) upward until it locks the reel drum (2)
rm and motionless.
4 Connecting to air supply
□Release the lead hose (5) and connect to the air supply or air
compressor hose.
5 Connecting your air tool
□Connect your air tool (not included) to the air outlet (6).
□Follow all instructions from the air tool and air compressor
for use.
6 Disconnecting from air supply and
rewinding the air hose after operation
□When you have nished using the air hose (3), disconnect
the air tool from the air supply. Unlock the lock plate (1),
turn the reel drum (2) counterclockwise by holding the reel
handle (7) and manually rewind the air hose evenly onto the
reel drum.
□Wipe the hose reel clean and re-set the lock plate to lock the
reel drum before storage.
NOTE: Always use thread sealant tape (not included) to
seal all NPT threaded ttings for an airtight connection in
your air line for best tool operation.
6
1
3
2
7
1
25

7
Maintenance
1. Always operate the product with care by following the instructions in the manual.
2. Always disconnect the air connection hose and air supply when product is not in use.
3. Check the air hose for frays and tears.
4. If the product fails, have it repaired or replaced by an authorized technician.
5. When you are not using the product for a long time, wipe it clean with a dry cloth and store it in a dry and safe place out of reach of
children.
Troubleshooting
Problem Possible Causes Solution
The reel drum cannot be
turned when the air hose is
being extended or rewound.
The reel drum is locked. Release the lock plate.
The tool runs slowly or will not
operate.
1. The air pressure is low.
2. The air pressure dropped.
3. The air hose is leaking.
1. Adjust air regulator to the correct working pressure for tool.
2. Make sure that the air connection hose is of the proper size and
length. Do not use multiple hoses connected together with quick-
connect ttings, which will result in pressure drops and reduce
tool power.
3. Tighten and seal all NPT threads of the hose ttings in your air line
with thread sealant tape. Replace if the hose is damaged.

Service Parts
1
2
11
15
4
5
6
8
9
10
7
3
12
13
14
16
17
18
Part Description Quantity Part Description Quantity
1 Steel frame 1 10 Screw 3
2 Handle grip 1 11 Lock plate 1
3 Reel drum 1 12 Reel handle 1
4 Nut 1 13 Spacer 1
5 Connector 1 14 Screw 1
6 Set plug 1 15 Bushing 1
7 Gasket 1 16 Air Hose 1
8 Screw 1 17 Nylon tie 2
9 Cover plate 1 18 Hex key 1
Distributed by:
TRACTOR SUPPLY COMPANY
5401 VIRGINIA WAY
BRENTWOOD, TN 37027
For customer support, call: 1-888-376-960
1
www.TractorSupply.com