John Thomas BE-60T User manual

ITEM NO.: BE-60T
REVISED DEC 17, 2015
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
: 60 IN FARMHOUSE BENCH
: BE-60T

ITEM NO.: BE-60T
REVISED DEC 17, 2015
Printed in Vietnam
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly
and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to
beginning assembly, however, make sure all parts and hardware are included and free of obvious
defect. If a part is missing or defective, please contact the store where purchased. If hardware is
missing, or you need help with assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched.
-Remove all wrapping material, including staples & packing straps before you start to
assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.

ITEM NO.: BE-60T
REVISED DEC 17, 2015
Printed in Vietnam
- 3 -
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Bench top
1
B
Legs
4
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Flat washer
(8x19mm)
8
3
Hexagon nut
(M8x13mm)
8
2
Spring washer
(8x13mm)
8
4
Wrench
(M13)
1

ITEM NO.: BE-60T
REVISED DEC 17, 2015
Printed in Vietnam
- 4 -
STEP 1
Attach legs (B) to the top (A) with hexagon nuts (3) and washers (2) and (1), as shown below. Tighten
with the wrench (4).