
OPERATOR’S MANUAL JDI-5DP OPERATOR’S MANUAL JDI-5DP
Operation:
Operation:
1. Remove the cap A and fill the tank with oil no more than the maximum level shown on the level
indicator B. (See Fig. 2)
Pressure Gauge
Handle
Safety Valve
Level Indicator
Cap
Wheels
B
A
F
E
D
C
Fig. 2
2. Replace the cap and tighten. (See Fig. 3)
3. Close air valve C. (See Fig. 3)
4. Open valve C to pressurize the tank 45 PSI (Maximum
of 80 PSI). Monitor the pressure using the pressure
gauge E. (See Fig. 3)
NOTE: A safety valve F s nstalled to prevent
over pressur zat on of the tank. The safety valve
s cal brated at 90 PSI.
5. o dispense fluids, squeeze the handle on the fluid
delivery gun G. (See Fig. 4)
B
G
A
F
E
D
C
C
A
Fig. 3
Fig. 4