JohnsonSuisse barossa pivot User manual

barossa pivot
semi-frameless shower screen INSTALLATION GUIDE
JohnsonSuisse

barossa pivot
semi-frameless shower screen
Introduction..................04
Care..................10
Warranty..................11
CONTENTS
2
JohnsonSuisse

barossa pivot
semi-frameless shower screen
3
Please inspect the product immediately upon receipt for damage, missing components or manufacturing
faults. Damage reported later connot be accepted.
Please handle the product with care avoiding knocks and shock loading to all sides and edges of glass.
Glass edge must not contact any hard surface.
Claims for defects/damage cannot be made after installation is completed.
NOTE: SAFETY GLASS CANNOT BE REWORKED. DO NOT TRY TO ALTER PARTS IN ANY WAY.
Please read these instructions carefully before you start installation. Special care should be taken when
drilling walls to avoid hidden pipes or electrical cables.
GENERAL INFORMATION
This product is heavy and may require two people to install.
Tools required

barossa pivot
semi-frameless shower screen COMPONENTS
4
INSTALLATION Instructions
[6] 1 x Brackets.
1
1 x Wall Connect Clips
1 x Wall Plug.
1 x Wall Clip Fixing.
2 x Glass Fixings.
x Wall Plug.
1 xS crew M4x35.
[7] 4 x Wall Plugs.
4 x Flat Screws M4x35.
[1] 1 x Aluminum Seal.
4 x Clips.
[5] 2 x Hinges.
[4] 2 x . Drip Seals
[3] 2 x Magnetic Seals.
[2] 1 x Fixed Panel.
2 x . Setting Blocks
[4] 1 x Door Panel.
[2] 1 x Wall Post.
[8]
4 x Screw Cover Caps.
4 x Screws M4x10.
[2] 1 x Handle Set.
[1] 1 x Installation
Instruction.
[3] 1 x Fixed Panel.
2 x . Setting Blocks
[1] 1 x Wall Post.
[3] 4 x Wall Plugs.
4 x Flat Screws M4x35.
[4]
4 x Screw Cover Caps.
4 x Screws M4x10.
Before commencing installation, please check you have received the correct parts required; outlined below

barossa pivot
semi-frameless shower screen
INSTALLATION
5
INSTALLATION Instructions
Assembly Drawing
[1] 9xWall Plugs
[2] 8xFlat Screws M4x35
[3] 8xScrews M4x10
[4] 8xScrew Cover Caps
[5] 2xWall Posts
[6] 2xFixed Panels
[7] 1xAluminum Seal
[8] 1x
[9] 1xDoor Panel
[10] 1xHandle Set
Horizontal Drip Seal
[11] 2xMagnetic Seals
[12] 1xBracket
[13] 1xWall Connector
[14] 1xWall Clip Fixing
[15] 1xScrew M4x35
[16] 2xGlass Fixings
[17] 2xHinges
[18] 1x
[19] 2xClips
[20] 4x
Vertical Drip Seal
Setting blocks
[9]
[10]
[11]
[12]
[17]
[14]
[16]
[13]
[18]
[6]
[5]
[1]
[2]
[3]
[4]
[7]
[8]
[19]
[15]
[20]

barossa pivot
semi-frameless shower screen
From wall corner to
the edge of wa ll post
118 0 -1205
960 - 985
860 - 885
Before starting:
Ensure floor area for installation is completely level.
Walls must be plumb to within 5mm over the height of the screen.
Check-measure that the screen size shown on the packaging suits
the intended installation area.
INSTALLATION
6
INSTALLATION Instructions
Step 1
Step 2
1
2
3
Flat Screw M4x35
View from inside
1
2
3
1
2
960 - 985
860 - 885
From wall corner to
the edge of wall post

barossa pivot
semi-frameless shower screen
INSTALLATION
7
INSTALLATION Instructions
Step 3
Step 4 View from inside
Door Panel
Fixed Panel
Up
Down

barossa pivot
semi-frameless shower screen
8
INSTALLATION Instructions
Step 5
Step 6
2a 2b
3a 3b
4a 4b
1a 1b
4c
Ensure wall profiles are plumb.
Adjust enclosure to be square and level.
Wheels should be adjusted to square the
doors and ensure smooth running.
23
4
1
1
1
2
34
INSTALLATION

barossa pivot
semi-frameless shower screen
Allow 24 hours for silicone
to dry before using shower.
INSTALLATION
9
INSTALLATION Instructions
Step 7
Step 8 View from inside
3.2mm
Screw M4x10
1a
1b
1c
24 hours

barossa pivot
semi-frameless shower screen CARE INSTRUCTIONS
This screen has been treated with easy-to-clean glass surface treatment.
Please follow the care instructions to ensure your treatment is long lasting.
After use, your shower should be cleaned with a mild detergent and water.
This is particularly imprortant in hard water districts where insoluble lime
salts may be deposited and allowed to build up.
Do not use abrasive based cleaners.
Care should be taken to avoid contact with strong chemicals such as
organic solvents and strippers.
If in doubt please contact Gemini Industries or visit the website for details.
Please retain these instructions for aftercare and customer service details.
CARE Instructions
10